FIELD TESTING THE BIG 3D PRINTED TANK (and ride in)
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2020
- Thanks to World of Tanks for sponsoring this
video. Follow the link tanks.ly/35OlHcb and use the code
“TANKTASTIC” to receive 7 premium days, 500 Gold, and a premium T-127
tank. For new accounts only.
At last! I did take the tank out for a spin and what a spin!! The tank is capable of going over branches, stones, cliffs, I'm genuinely surprised of how well it performed on the field. After last video I swapped the two VESCs for an Odrive with one encoder for each motor and that made a huge difference on the low speed torque of the motors. I haven't mastered the Odrive yet so I had to reset it a few times during the test but this test has demonstrated that those motors are powerful enough. I may even add an extra reduction step in the future just to be able to pull things or maybe use it to remove snow. Please leave in the comments what you think I should be adding next to the tank as it will probably take a bit of time until you see this tank again on the channel. Enjoy!!
All the sprocket brackets and spacers where printed with Matterhackers NylonX on the PulseXE, you can find it here:
(affiliate link) bit.ly/2LSzveK
If you want to support this channel you can do it here:
Patreon: / ivanmiranda
Merchandise: www.bonfire.com/store/ivan-mi...
PayPal: www.paypal.me/IvanMirandacom
For regular updates on my projects follow me on:
Instagram: / adnarimnavi
Twitter: / adnarimnavi
Facebook: / adnarimnavi - วิทยาศาสตร์และเทคโนโลยี
![[Live] : ONE 167 วันนี้!! "ตะวันฉาย vs โจ"](http://i.ytimg.com/vi/D9_dvfIa6Ao/mqdefault.jpg)
"It seems that insane works better."
Now that's a message I can get behind!
Me too! 😂
Hell yeah.
@@ivanmirandawastaken call the high amp boost "Ludicrous Mode"
@@greggv8 lol
Гроб на колёсах
You should bring it to the beach and film the people’s reactions when they see a tank but nobody controlling it ( because you are inside it ) 👍 love the tank build series
I't has so many rods and bearings that I'm scared to be near the beach and everything rusting. It'd take ages to swap all the hardware. It'd be cool though... yes
@@ivanmirandawastaken you could install a fpv camera maybe?
Not the one it has? With googles?
@@ivanmirandawastaken upgrade to stainless steel :)
@@greggv8 Stainless will still rust in seawater. Only thing that works properly against sea water is sacrificial anodes and protective films like paint.
I'm calling this tank "Clifford" because it looks like a big red dog
Or Clifford from gta v online? That is a usb virus.
Who says im a virus im a dog mate
@@konstak05 APOCALIPSE SCENARIO
im calling it "The Coffin Tank"
Clifford the big red tank
A red tracked coffin
Mixed with a little bit of E100
Nah, that's no coffin...
*_Thats a hearse_*
Coffin dance?
@@SherylNomeFairy9 Ah a world of tanks lover I see
Works of tanks had better add your tank when it's done.
We had the TOG, we now have the Miranda
I hope it’ll be in blitz
Put this (and the Skink) in the game
@@wunderwaffe6752 why'd you have to remind me of that he'll of a game
8:19 Is it just me or do others see a doggo-tank? Just need to slap some floppy ears either side of the lid.
Clifford the big red Doggo-Tank!!
@@OutcastPB44 YES! Grew up reading Clifford books.
1:05 those failed or wrong wheels are very handt tools as i see them in almost every video.
Those are from when I did the EDF amphibious car, they did work, this is the second life
@@ivanmirandawastaken ah. Thats even better then
@@ivanmirandawastaken Are they now ramp SPACERS!!?
I want my uber driver to pull up in this
You both will be tight in there
@@ivanmirandawastaken build an uber-version(two-seater)
Front and back or side to side
@@ivanmirandawastaken id say in an upright seating Position two might fit front and back already, you would just have to make it higher, and replace all loadbearing parts ….
I have a better idea..
You should become an uber driver uourself and drive one of these and surprise people!
Next: 1) add the gun 2) build another one 3) fight!
Another one!?!? 😅
@@ivanmirandawastaken Another army
@@ivanmirandawastaken what better way to incorporate a lid latching system that works from inside and out?
Bob Semple: "Finally a worthy opponent!"
THIS is amazing and I hope to see it in person some day.
Hopefully soon? 😉
You may not fit in it but Tom will.
Yes do a collab
Me to
I have dream, having such vehicle 🤣
Chinese Factory: We are dealing with the most difficult situation that a filament company can resist. We have not more of red filament.
Chinese President: And we know the root cause?
Chinese Factory: Yes, it is called Miranda, Ivan Miranda.
YESSSSSSSS!! So worth the wait, can't wait to see what you'll come up with next! Thanks a million for being awesome.
Thanks a million for watching
Pretty cool seeing it climb hills with ease!
The flexing is a bit worrisome, wouldn't want it cracking and the motors coming close to your head.
Hope you add a lot of padding before going off road!
One of the things on my list is shielding the motor compartment and battery, yes
@@ivanmirandawastaken 4 latches on each side and 2 at the front would lock the lid down tight and reduce the flexing. A single lever latching system usable from outside and in would be very cool. Perhaps copy the latches used on the Apollo capsules? The 3D files are free downloads from NASA. They're neat things, move a roller tipped arm at right angles to the actuation motion.
I feel that perhaps a helmet should be used here, for extra safety anyway.
@@greggv8 hmmm... not so sure if latches are what i'd be considering when i had to be inside with 100+ amps of Lipo running close to max. gimme a swift & easy exfil route!
great build - you should be proud of this project, along with all your others!!!
Russ from Ocala, Florida, USA
@trabladorr where does your pfp come from? It's very similar to one I used to use lol
We need a Railgun inside!!! 😲😂👍🏻
Imagine the same thing with a metal 3D printer ...
Wow, that thing is powerfull! I was sure that the driveline would break somewhere when you went on your little joyride but boy was I wrong.
Great video!
I wish i could afford the filament to make this, would absolutely bring it to my paintball field and convince them to let me use it for some special games XD
Congrats on getting this beast up and running!! I've been following this series since the start. It is such an impressive display of engineering and problem solving. Keep up the good work!
OMG I just realized that your tank looks like a diesel train engine on tracks. Pacifically it looks like diesel 10 from Thomas the tank cartoons. Diesel 10 is a villainous diesel engine with a roof top hydraulic grabber or claw which is nicknamed Pinchy. He is ochre colored with white hazard stripes and is known to be mean, devious and is despised by the steam engines. Thomas gives him a 10 out of 10, for devious deeds and brutal strength! Just need the pincher and some eyes. LoL love it
YES YES YES!1! Round of applause!! Still needs googly eyes though 🤣👀🤣
This is amazing cant wait to see the turret on the top keep up the fantastic work amazing
Tanks!
congrats Ivan, it looks amazing! also love how the loose lid seems to make it talk when it drives
Haha! Tanks Baschz!
@@ivanmirandawastaken tank you!
Seriously amazing. I love your fun filled, break it till you make it attitude. Very inspiring.
Now. Take that thing through a fast food drive through :D
That's an idea...
You’re probably going to need a comfortable seat and some cooling for those motors :-)
Well done Ivan, you really have made something VERY SPECIAL indeed!
"Only one thing left to do because it's not broken!" Love ya man!
a 3d Printer with a multi extrusion setup would help with grip as you can print both in PLA/ABS on one head and a rubberized ninja Flex to add grip in a thin strip on each tread linkage, and a brass powder infused filament might help with its durability. just a thought. Thinking about how to improve the design is all. Looks great and runs well.
I waited for so long!⚡
how have they not being sponsoring this since day one
Damn so much work behind that. Mad respect!
Depending on what you do for the "cannon" it might have room that you could sit up inside the turret. Would be far more comfortable im sure.
Or a hatch so you can sit up through or lay down depending on the situation.
That is one of the coolest prints I have seen yet! Two words: STEALTH Tank
TH-cam recommend this. I'm not mad instead im impressed. It's SO cool!!!!!
The giggles that came from inside the tank were contagious.
It is an experience... 😅
When I get established at my own place I want to make one of these that meets all the rules and regulations of the airsoft fields. Also a speaker to blare some English folk punk or something else that is a mix of something old and new. Like Hungarian Dance no.5 metal version. Also camo+shark face=master piece. Haha.
I love your videos, sir. This is the stuff I dreamed of doing 30yrs ago as a teenager but w/o the funds or tech to accomplish. SPACERS!
Great video! I've been making diy tanks for years, but always have some trouble with the transmission (worm gears wearing out, gears snapping, or even the entire gearbox being annihilated). Do you have any advice on making a strong gearbox? (use a worm gearbox, or a spur gearbox). Also, a suggestion is that instead of using a tall cover for the tank, you can make it have a lower profile by putting your upper body inside a turret, and your head stick out of the turret. This will lower the entire cover to make it look like a ww2 beast rather than a moving house or a kolohousenka
This would take things like laser tag or paint ball to the next level! Very neat project.
Absolutely amazing work :-) I Love that tank.
It would be super cool if you scaled it up to have a turret with a nerf machine gun inside. That way it could have a commander/driver, and a gunner/loader!
Might be worth considering adding an emergency stop button on the front and back. Runaway RC cars are nbd, but this is 125kg. Runaway tank never coming back... Runaway on a one way track...
Thought of that yes, it is on the list, I hope I do it before I need it
The boardwalk in Wild Wood New Jersey has these floating battle tanks that look similar to this. They seat 2 people. One person drives and the other person shoots the yellow balls.
You can pay to drive on of the floating tanks, or pay to use o n of the many guns surrounding the giant water tank.
Each tank has two targets on it. And randomly scattered hanging above the water are missiles. And if you hit one of the targets on the tank, while the tank is below one of the missiles, a giant water explosion happens and the tankers get all wet.
I begged my parents to go in a tank when I was only 6 or 7 years old, but I couldn't drive, only shoot. So my dad paid the $20 ( which back in the 80's, was a lot of money ) so he could drive and I could shoot. But when we got onto the field, we got hit and water started coming I to the tank and I started screaming (BECAUSE THEY LOCK YOU IN THE TANK!!!) because I was sooo scared.
I felt so bad because I was screaming/crying the entire time he drove the tank back to the station, lol.
So proud you've finally managed to get it to drive properly, it's been fun seeing it go from tiny tank to massive tank. Looks like it needs a magnetic catch or something to hold the top shut while driving, but i assume you were already thinking of that!
Congratulations! The tank works very well!
Your best build yet. Amazing work.
honestly i love this design since it has so many features found in real world tanks that were never to my knowledge put together. like the suspension system looks a lot like the sherman hvss suspension, but it can turn on the spot like late ww2 German tanks such as the tiger and panther and the fender design reminds me a lot of the king tiger. something really interesting about your design is its similarities to the German Elefant which was rear sprocket drive and had 2 sets of sprockets with no return rollers. overall i love this project and i would love to see its future developments
FANTAVILLOSO WONDERASTICO!!! it's amazing. Congrats for each video.
Looking good so far 👍. If you want to ride that thing off road you'll need roller guides on your rollers and Treads, (little spikes on the inside of the tread to keep them in place) so they don't slip off the middle of the tread, and a more active and staut tread tensioning system.
What an amazing project and result! You, sir, are an inspiration.
Tanks!
@@ivanmirandawastaken XD
The Hunt for Red Tankroller...
Awesome!
That's so FREAKING Cool dude. :D
this toy is wonderful, congratulations, great work
Espectacular Iván, increíble proyecto! Saludos desde Argentina :)
Who ever sells this guy red filament is a very happy person lol
Ivan:"now we can plough the forest'
Forest: NYAHHHH
You should be very proud. I just love the tank videos 😍😍😍👏👏
It's alive Ivan! 👏👏👏👏👏🤗
With those slots on the front that look like eyes and the top flapping a bit as it drives, it looks like a big, red, happy cousin of Pac-Man.
Amazing work! Congratulations on a stupendous build!
World of Tanks needs to put Ivan's tank into the game!!!
Yes!
Great Job. I'm surprised by how much less traction it gets when you are inside, but it looks like you have good power. On RC car prints I've done, I used either bicycle tubes or bicycle rim liners cut into a circumference and glued around the contact patch. You could use self-tapping screws on each tread section to hold it in place, heating while screwing it in to get a really good hold down. It would be time consuming, however, it would look awesome and be very functional.
Ima pull up to the zombie apocalypse with one of these
That thing is a monster
Yes
i Freaking love it!! Ivan you are such a genius, this is such a cool project and i can't wait to see what's next!! maybe 3d print a working car? electric of course!
It is really insane. I love it!
Tanks!
Esto es simplemente épico, gran trabajo!
Gracias!
This is amazing man!
This is awesome. It's a real vehicle! A 3D printable vehicle you could actually download and build. Simply amazing. To improve, it, I think you need a metal planetary reductive gear drive to add torque. You got plenty of speed from those huge motors, but torque is a bit of a challenge. With both high input speed and higher output torque you can actually achieve more speed with less strain on your motors. RC helicopters usually use a reduction gear ratio so the tiny motors can rotate the large rotor more easily. This allows them to achieve more speed with less strain, thus achieving high thrust.
World of Tanks is the best sponsor for this type of 3d printed stuff...
THANKS FOR THE WORLD OF TANKS CODE! I REALLY ENJOY YOUR VIDEOS THANKS FOR THE AWESOME CONTENT!
I can't wait to see you go offroad inside of it. The trick is pushing it until it breaks then fix it up stronger than it was.
Holy smokes that thing is enourmous. I'd think the tank will not bear the load of you in it AND going offroad, with oud breaking a few parts, but it migth be worth a try to identify the weak spots.
I think it'll hold me well, It is only one third of the weight extra. I'll have to test it to prove you wrong Clemens 😉
You r one incredible guy congrats mate. And your channel is already a hit , and more subs will flood your way
Tanks!
The one complaint i have with this is that the tracks are smooth as hell, so your traction in dirt is lower than what it would be if you had treads on your tracks. It would also provide extra height to get over small obstacles
this is by far your most tanktastic project so far!!!!
Tanks!
@@ivanmirandawastaken underrated
Yippee Ca Yo yippee Ca Yeh It’s running! Fun, good to see :-)
Tanks!
This is just Incredible ivan you are insane xD this is so awesome 😍😂
Fantastic job, Ivan!!!!! 😃
The bogeys seem to not depress far enough for the tracks slack, making it so the track loses friction with the ground. Its really cool to see you make "mistakes" that were made in real tanks from ww1 and 2. Means you are actually problemsolving and engineering.
Can't help noticing that you have the chassis protrude beyond the active surface of the tracks, front and back. We've been over this years ago, Ivan. They *will* catch on terrain when climbing.
You should put some sort of Inner lip or fingers on The front of the door so the door doesn't shift back-and-forth while driving specially if you plan on taking it off road I could see a finger design that bolts into existing holes that would make The lid significantly Strong When closed I can also see a latch being put in that will hold the door closed so it doesn't Rattle up-and-down While off roading Of course the latch would have to be somewhere you could reach it While inside These modifications I think would be very easy to incorporate I strongly suggest Putting fingers on it Or an inner lip specially if you plan on Putting a turret on top eventually The added weight would cause a lot more stress on the Hinge While driving I love what you do please keep up the good work You inspire me to continue making things I love 3-D printing I look forward to watching your videos to come
I love seeing your updates on the tank project, keep it up!
Tanks!
Man these 3d printed firearms sure are getting advanced.
seriously for something 3d printed to take your own weight is very impressive!
This isn't done yet! You still need to add the ball gun to the top of the tank on as a rotating turret
Very nice! You can sit up if you make a circular type turret periscope where your head can go so you can make it look like a mini tank with barrel turret on top
Awesome to see it work so smoothly. You did something really great there
Tanks!
This thing has to be a world record of some sort for 3-D printing! Also somehow looks like Clifford the big red dog! LOL
Everyone gangsta until you see a man riding a giant rc tank
The company that supplies you with red pla must be very happy
I can see your future....I see a passenger drone with 3D printined outer shell coming soon!💪💯😀
You should add drive sprockets since real tanks use them and it may help boost the speed of the tank. But it may also put more stress on the the tracks themselves too. Something to think about.
That tank is awesome!
That’s insanely good
Biggy...
Nice one.
You are always inspiring to me.
Great Vid. Now you need to put a compressed air bean bag turret with rotation and elevation control on it.
Have giant locker room on wheels. Puts bagpack on back.
:-) Also - it does seem insane works better :-) Love this project.
Armored vehicle rated 100% capable of deflecting cupid's arrows. >.<
Kidding!
KEEP IMPROVING ON IT!^^
stronger parts and stuff like that^^
Any chance of getting the odrive config you used on this one? I am building a smaller tank (80x80cm) and using and odrive, but it keeps failing for me. I believe it's because I don't understand the odrive well enough..
I can see an upcoming build for giant sno-cat coming! I live Idaho, United States and my back yard is a field with about a foot of snow in it right now!
Its actually flexing! Make a structual latch for the lid to help beef it up!