Ather 450X Cone Set Replacement
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Replacing the cone set on your scooter is a task that requires precision and care. Here's a step-by-step guide to help you through the process:
Step 1: Gather Necessary Tools
Ensure you have all the required tools, including a socket set, wrenches, pliers, and a suitable replacement cone set.
Step 2: Elevate the Front Wheel
Using a center stand or a suitable lifting device, elevate the front wheel of the scooter. This will provide easier access to the components.
Step 3: Remove the Front Wheel
Use a suitable socket and wrench to loosen and remove the bolts securing the front wheel. Carefully take off the wheel and set it aside.
Step 4: Access the Cone Set
Locate the cone set, which is usually positioned between the steering stem and the front fork. This may involve removing additional components, such as the fork covers.
Step 5: Loosen the Lock Nut
Use the appropriate tools to loosen the lock nut securing the cone set. Once loosened, you can adjust the tension on the bearings.
Step 6: Remove the Old Cone Set
Carefully slide out the old cone set from its position. Take note of the arrangement and order of any washers or spacers.
Step 7: Install the New Cone Set
Place the new cone set into the designated position. Ensure it aligns correctly with the steering stem and front fork.
Step 8: Adjust Bearing Tension
Adjust the tension on the bearings by tightening the lock nut. Be cautious not to overtighten, as this could lead to steering issues.
Step 9: Reassemble Components
If you had to remove additional components, such as fork covers, reassemble them in the reverse order of removal.
Step 10: Reattach the Front Wheel
Carefully place the front wheel back into position and secure it with the bolts. Tighten the bolts evenly to ensure proper alignment.
Step 11: Lower the Scooter
Gently lower the scooter from the elevated position, ensuring stability.
Step 12: Test the Steering
Before hitting the road, test the steering to ensure smooth movement and proper alignment.
Congratulations! You've successfully replaced the cone set on your scooter, enhancing its stability and steering performance. If you're unsure or uncomfortable with any step, it's always recommended to seek professional assistance.
#ather_electric_scooter #ather450x #ather450s #ather450xgen3 #ather450 #scooterservicing - ยานยนต์และพาหนะ
do you know how to get Athers diagnostic tools ?
If i use front brake the handle moves a bit forward ,is it coz of the cone set? Like something acting like a pivot point and the problem lies there, i think the SC once adjusted this for some other issue, can i connect with you to confirm? Thanks
Which One Prefect Cone Set Sir Mention Model Number And Vehicle Name To Use Cone Set For Ather
If budget isn't a concern, I recommend purchasing directly from Ather for the best quality. However, if you're looking to save some money, you can opt for the Vispa 160cc for the top cone and Suzuki access latest model, for the bottom cone. You'll need to buy two sets of cone sets in total to meet your needs.
Good esi hi video bnao
Thank you
Sir good knowledge ,thanks
Thankx
Mc kit konsa use kre bhai??
Service wale bol rhe hai 3000 me master cylinder change kr lo😢
Make a video on how to clean and apply belt spray on ather 450x
Sure
@@DIZ1988Mohanwaiting
Thank you for your time and effort taken for creating this video.
But shall i ask you a doubt regarding my Ather 450 what im facing, mine is just 8000 km run but recently i feel like the handle bar is not responding to slight turns while riding & feel like i might lose control.
The bike rides straight if not turned no issues, but slight pushes are sometimes not responding.
Could you help me with this ? My ride pattern is normal not heavy and bumpy roads also.
But i had given the scooter to service in Ather for belt tightening and i feel this is issue is after that IDK.
Please, if you could give some advice to this issue.
Check the rear wheel alignment, check tyre pressure, check the headstock tightness, as a basic steps, usually when the rear wheel alignment is wrong this happens
@@DIZ1988Mohan Thanks for your reply, btw I have given for service and will inform them to check these..
@@amllemans Great
I guess i have same issue once i accelerate and leave the handle the front slowly starts to shake i took it to service the first guy said everything is fine there's no handle issue then i took it to other agent there he said issue must be with lower berring balls and o was like as long as you can get it sorted after it was fixed it worked fine for a few days and now still the same issue by watching your video i now believe its yhe cone set issue and ill get this done asap unfortunately i cant take it to a local mechanic because of all the electronics on it ather charges a lot and does not fix the issue correctly if this issue is not solved ill be regretting buying an ather
Thank you for the details, yes I too faced similar issue and I figured out to fix it
can u explain this 20:45 part?
कुठल्या गाडीचे कोनसेट बसते
I think you having gen 2 , I have a side footrest that I designed for my scooter what about you
great
how many km you have ride? bcz im also facing this issuse
issue of oil seal at 25k km it depends on the riding condition
Sir does it covers under warranty
Yes but only replacement under 20,000 KM
I have issue with my 450x. If i turn slightly left, handlebar itself turn fully to left automatically. Please tell what is the issue
Please ensure the cone set is properly tightened, check the brake hose clamp to ensure it's securely fastened towards the left side, inspect the wiring harness to see if it's properly zip-tied in place. Finally, lift the front tire and thoroughly inspect for any irregularities or imperfections.
@@DIZ1988Mohan Thank you so much sir, but these showroom people are saying bike is fine. While driving bike is taking turns by its own🥲
@@meetbychance5141 Don't worry it must be the new AI ! :P Additionally, inspect the tire condition, and attempt to loosen the axle bolt before tightening it securely once again. check tyre pressure.
@@DIZ1988Mohan ok
I am facing the same issue, took to service 5 times still not resolved 😂
Hi bro ather 450 Pro same problem fourproblem 5500 kilometre
If under warranty plz get it fixed by Ather if not you may need to fix outside / mostly Ather will cost 2-3k to fix outside under 1500
150000 lakh me 3 gadiya ayengi
Battery price 50000 to 60000 rs hai bhai
True
Ola coarn cet replace....
OLA no idea
Video background sound very bad
am sorry its a raw sound next time will improve
Pls give part number bro
vispa 150 cone set and bottom suzuki 110
They are charging 3k for this 😢
OMG new caliper cost 3100
Make a video on how to clean and apply belt spray on ather 450x
Silicon spray
Someone want to silicon spray Contact me