How To Replace Ather 450X Fork Oil Seal | Wheel Bearing Change
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- In this comprehensive tutorial, we guide you through the process of Ather Fork Oil Seal Replacement and Wheel Bearing Change for the Ather 450x electric scooter. Whether you're a DIY enthusiast or looking to understand the maintenance procedures for your Ather 450x, this step-by-step guide provides clear instructions for ensuring optimal performance and safety. Follow along as we walk you through the necessary steps to successfully replace the fork oil seal and wheel bearings, allowing you to maintain your Ather 450x with confidence.
Replacing the fork oil seal is a relatively advanced procedure and requires proper tools and technical expertise. Here's a general guide, but it's crucial to consult your motorcycle's service manual for specific instructions tailored to your bike's make and model. If you're not comfortable with these tasks, it's advisable to seek professional assistance.
Materials Needed:
Motorcycle stand or lift
Socket and wrench set
Fork seal driver or a suitable tool
Fork oil
Fork oil seal kit
Screwdriver
Replacement dust seals (optional)
Clean rags
Procedure:
Secure the Motorcycle:
Place the motorcycle on a stand or lift to ensure stability.
Remove the Front Wheel:
Loosen and remove the front wheel according to your motorcycle's service manual.
Drain Fork Oil:
Locate the fork drain screws and carefully drain the fork oil into a suitable container.
Remove the Forks:
Loosen the fork clamp bolts and slide the forks out of the triple clamp.
Remove Fork Caps:
Remove the fork caps using a socket and wrench.
Remove the Fork Springs:
Take out the fork springs from the fork tubes.
Access Fork Seals:
With the fork disassembled, you can access the fork seals.
Remove Old Fork Seals:
Carefully pry out the old fork seals using a screwdriver.
Clean the Fork Tubes:
Thoroughly clean the fork tubes with a clean rag to remove any debris.
Install New Fork Seals:
Place the new fork seals onto the fork tubes, ensuring they are aligned correctly.
Seat the Seals:
Use a fork seal driver or a suitable tool to gently seat the new fork seals into place.
Reassemble the Forks:
Reassemble the forks by following the reverse order of disassembly. Insert the fork springs, tighten fork caps, and secure the forks back into the triple clamp.
Refill Fork Oil:
Refill the fork tubes with the recommended amount of fork oil as per your motorcycle's specifications.
Reinstall Front Wheel:
Mount the front wheel back onto the motorcycle and tighten it securely.
Test Suspension:
Bounce the front end to allow the fork oil to circulate. Check for any leaks and test the suspension.
Thank you and Subscribe to my channel
#ather_electric_scooter #ather450x #atherenergy #ather450s #ather450 #ather450xgen3 #450x #forkseals #oilseal #diy #wheelbearing
Can please share me the size of all Oil seal for ather 450x
Really helpful. Do you know how many ml you refilled it with ?
just divide by 2 and fill in its easy 175ml/2=87.5 (80-85 ml)
Do got any issue with the back wheel caliber .. mine pads worn out in just 500km ..make video of caliber service
Rear caliper is very easy to replace just takes 30-40 min to fix
Oil Kitna dalna hai
Everyone complaint about EV, but my thought of view people who has basic knowledge about, mechanical+electrical only handil theses kind of stuff.
After you understand, this is best of transport.. cost effective.
Absolutely true
Good
Thank you.
Please do a video on ather 450 x rear suspension
Sure i will do it when time permits
Cost of service is this suspension is?
less than 1500
Bro what about mc kit
Plz suggest me mc kit for ather
I went to the service center and asked but they said that the master cylinder will be changed for Rs 3000
MC kit costs max 350 RS oil 100 labour 100 simple. Enfield 350 MC kit exactly fit to Ather.
@@DIZ1988Mohan I tried with all mc kit but still the oil is leaking
They said ather s master cylinder radius is bigger than other vehicles 🤷
@@Spontango65 @Spontango65 I actually measured with the vernier before buying and the 350 Enfield was the exact fit, may be try OEM of some other brand because the material might differ but size remains same.
Bro please share bearing seal number
Bearing seal is mostly not available as spar