Your garage workshop looks very similar to mine. Your equipment is also similar. Thanks for sharing. I will be applying this design into my router table cart.
I just bought the same router table. And am looking to build a mobile cart as well. The router cart looks great good job, I did sorta the same thing with my drill press but slightly lower build quality.
This is a really cool idea, I've been looking for something exactly like this with storage space on the bottom and a drawer or two at the top. Could you please post the plans?
ragmon2001 sorry for the late response! I just finished polishing the plan and it’s available for purchase in the description. Consider supporting this channel :)
Hello.........I purchased your plans and loaded them in sketchup but was looking for a cut list or a more detailed....i.e., with dimensions for all of the plans......am I missing something herel...........??????
Did you use 3" castors or 2" castors. Your video indicates 3" but when I click on the link it brings me to 2". I purchased the plans but it is not clear on the diagrams? Thank you.
7 July 2024 UPDATE: After learning a little bit about using sketchup, for example the tape measure and the zoom, orbit, and pan features, this plan is much more usable. Time to go back and give it another watch! Great video, but not so much for the plan. I bought the plan, thinking that there would be detailed measurements, but instead found an exploded view of the components, with some of them having no measurements at all. I know that $5 isn't much, but I expected a little bit more than this. Sure, I can probably go through and figure out what the measurements would be, and in any case, end up with something that is workable. But then, why pay money for a plan?
Hi! I purchased your plan, and I have opened it in Sketchup, but I don't see a plan. Just a model. Could you advise on how to print out the plan? Thank you!
For attaching the router table, get some lag screws or bolts. I don't remember the exact dimension, should be something along 2-3 inches. I believe if you read the manual of RA1181 it has suggested dimensions! The bottom line is it should be long enough to bolt it to the table top, and not too long to protrude into the drawer space. Hope this helps.
Great build, but the plans can be so much better. Confusing and no step by step instructions. I should’ve just winged the build without buying these awful plans
I’m pretty upset !! I spent 30 minutes to figure out how to download sketch up then uploading your “plans”. Only to find out you don’t have clear cut lists. This is a rip off and you should do your customers a favor and make it more clear. A simple list of the cut dimensions would work. But you use this ridiculous 3D program that doesn’t include all the info to complete your product. You have my email, please make this right. I urge everyone to reconsider buying these so called “plans”.
Nice video and table. I appreciate that you show what you are building first.
Great design! Love the bottom compartment for the router case.
Your garage workshop looks very similar to mine. Your equipment is also similar. Thanks for sharing. I will be applying this design into my router table cart.
I bought the plans. I can't wait to build it!
I've watched many videos on different types of cabinet for the router and yours is just right for me. Great video, thank you.
I just bought the same router table. And am looking to build a mobile cart as well. The router cart looks great good job, I did sorta the same thing with my drill press but slightly lower build quality.
Great project! Excellent job. Thanks for sharing your work. I just purchased the same router table. Now I need this cart!
Great build! Perfect spot for the case. I have been looking for one to make and this will definitely be it!
Very educational video, I learned a few new things watching this. I like your design and may use it to make my own.
Glad that it helped!
I love how simple yet effective this is. Well done.
You are a pro!
Loved you on Silicon Valley.
Good job man
Nice work. I have the same router table and have been looking for ideas on building a cart. Thanks for sharing.
Just purchased the plans as I have the same router and table. I’ll let you know how it turns out 😁
Dude, love your video. Might want to provide more detailed information on your plans.
Outstanding work! Can't wait to build one for my RA1181
Love this! What a wonderful idea! I would like to make one as well!!Thank you for sharing :)
This is a really cool idea, I've been looking for something exactly like this with storage space on the bottom and a drawer or two at the top. Could you please post the plans?
ragmon2001 sorry for the late response! I just finished polishing the plan and it’s available for purchase in the description. Consider supporting this channel :)
Silicon Valley Woodworker thanks but you took so long I already built it
Good job
Very nice video and clean execution of the project! All the best, Rob in Switzerland
Do you have a plan for the table saw cart also?
Hello.........I purchased your plans and loaded them in sketchup but was looking for a cut list or a more detailed....i.e., with dimensions for all of the plans......am I missing something herel...........??????
We got bamboozled. What a scam
Did you use 3" castors or 2" castors. Your video indicates 3" but when I click on the link it brings me to 2". I purchased the plans but it is not clear on the diagrams? Thank you.
7 July 2024 UPDATE: After learning a little bit about using sketchup, for example the tape measure and the zoom, orbit, and pan features, this plan is much more usable. Time to go back and give it another watch!
Great video, but not so much for the plan. I bought the plan, thinking that there would be detailed measurements, but instead found an exploded view of the components, with some of them having no measurements at all. I know that $5 isn't much, but I expected a little bit more than this. Sure, I can probably go through and figure out what the measurements would be, and in any case, end up with something that is workable. But then, why pay money for a plan?
What a joke. I just wasted my money too
Glad I saw this comment. Not even a cut list?
@@large_eddy Not that I was able to find. Since I bought it, maybe I'll go back and check it out again, since it's been a while.
Hi! I purchased your plan, and I have opened it in Sketchup, but I don't see a plan. Just a model. Could you advise on how to print out the plan? Thank you!
Hey Alex! Thanks for supporting! In your SketchUp window, there should be "Scenes" that shows the assembly and drawer spacing.
Bought your plan but can't open file, is it possible to convert to PDF file? Thanks.
I can’t download the plans. It seems I must have sketchup. Can you mail me hard copy? Or what should I do?
Consider adding to the base in back so you have a place to store the table when you want to use this cart as an extension run-out for your table saw.
What kind and size of screw did you use to attach the router table to work surface?
For attaching the router table, get some lag screws or bolts. I don't remember the exact dimension, should be something along 2-3 inches. I believe if you read the manual of RA1181 it has suggested dimensions! The bottom line is it should be long enough to bolt it to the table top, and not too long to protrude into the drawer space. Hope this helps.
i just bought the plans but don't have sketch up, can you email me a pdf?
What size of drawer slides did you use?
I used 18 inch full extension drawer slides. I've updated with a link in the video description in case you are interested in the product I used.
I love the concept, I paid for and downloaded the plans and found them very poor.
Pls pls pls get a push stick.
I have a bunch :) Admittedly some of the cuts might not be the safest move.
Great build, but the plans can be so much better. Confusing and no step by step instructions. I should’ve just winged the build without buying these awful plans
Man safety first you wear gloves doing this kind of work.
I’m pretty upset !! I spent 30 minutes to figure out how to download sketch up then uploading your “plans”. Only to find out you don’t have clear cut lists. This is a rip off and you should do your customers a favor and make it more clear. A simple list of the cut dimensions would work. But you use this ridiculous 3D program that doesn’t include all the info to complete your product. You have my email, please make this right. I urge everyone to reconsider buying these so called “plans”.