I use my torque wrench on the highest setting at times to do that in hard to get places. I have a calibration lab check it from time to time and it's fine. But I agree it's not something you would want to do a lot, and I don't. Best Wishes n Blessings Keith
You can actually use a torque wrench to loosen as well as ratchet down bolts as long as the breakaway torque doesn't exceed the what the wrench is capable of.
But why the fuck would you do that for when you could just use a 1/2" drive ratchet, which doesn't require you knowing any breakaway torque specs and shit....fuck it id use a breaker bar before a torque wrench hahaha
i fully support doing this type of service i have personaly seen it take away misfire's and other issues, but there 2 is good ways of doing this i reccommend doing it both, one is using a mister with the cleaner being misted out into the intake and the other is puting pressurized cleaner into the fuel rail with the fuel supply cut off and return side blocked off and putting the cleaner straight through the injectors
You should do a fuel injection cleaning because your car dealer hasn't stolen enough of your money just yet. It's a waste of your time and mostly your money. Gasoline has so many detergents and you have an fuel filter that catches large particles. Don't do it.
If your engine has lost power, something is wrong with it and fuel injection cleaner want fix it. Run away from anyone who try to sell a fuel system clean.
3.2 porsche cayenne 2005 ignition coil no 1 was faulty and drive around 30 km and it was fine but little bit misfire. when I replaced the new ignition coil the car start but not move and I diagnosed by computer now show these 3 codes p0261 , p0264 and p0267 which mean cylinder 1 ,2 & 3 injectors circuit low. please guide. I need to open the injectors or there is any short way .thanks
+Ed Brown I agree with killing tree huggers, but modern injection is the shit. No way you could ever have turbo charged engines with 1200+ HP on pump gas before this. No way you ever could have a naturally asperated engine with 700HP on pump gas and get 17 MPG as well. The only problem is the shit should be available to public to perform high pressure injector cleaning @ home. These morons are idiots
Check out the guy at 4.02 loosening bolts with a torque wrench I'll bet he uses a micrometer for a C-clamp.
+E.PLUMBUS UNUM good call. lmao I love the micrometer reference. Brilliant
+E.PLUMBUS UNUM I LOVE that comment I was drinking cola at the time and sprayed cola from my nose!!
I use my torque wrench on the highest setting at times to do that in hard to get places. I have a calibration lab check it from time to time and it's fine. But I agree it's not something you would want to do a lot, and I don't. Best Wishes n Blessings Keith
You can actually use a torque wrench to loosen as well as ratchet down bolts as long as the breakaway torque doesn't exceed the what the wrench is capable of.
But why the fuck would you do that for when you could just use a 1/2" drive ratchet, which doesn't require you knowing any breakaway torque specs and shit....fuck it id use a breaker bar before a torque wrench hahaha
i fully support doing this type of service i have personaly seen it take away misfire's and other issues, but there 2 is good ways of doing this i reccommend doing it both, one is using a mister with the cleaner being misted out into the intake and the other is puting pressurized cleaner into the fuel rail with the fuel supply cut off and return side blocked off and putting the cleaner straight through the injectors
is this from 1929?
+certified30 1738.
00:38 - 00:40
I still don't know why noone has done gif out of this
They are right about the EGR but if your Intake-EGR port is blocked. A cleaner want help. You have to clean it by hand.
Please shows us how to clean the fuel induction system.
if my doctor looks like him I'm walking back out the office. I don't trust that mustache.
+Dcdatruth85 LOL I agree! hahahaha
Hahahah😭😭😭😭😭😂😂😂
I see that Ford Expedition is from Butler County, Kansas..
Before and after should be from the same engine?
i dont need to be told it needs to be done. i need to know what is the best cleaner to pressurize into the fuel rail to get it done.
does this service stop smugness and wobbly heads?
Umm you don't burn octane you burn fuel vapors. Octane is a fuels ability to resist burning.
+Roy Leblanc Indeed
You should do a fuel injection cleaning because your car dealer hasn't stolen enough of your money just yet. It's a waste of your time and mostly your money. Gasoline has so many detergents and you have an fuel filter that catches large particles. Don't do it.
Who are these people? And why should I trust them?
Look like they wouldn't know how to open the hood!
If your engine has lost power, something is wrong with it and fuel injection cleaner want fix it. Run away from anyone who try to sell a fuel system clean.
go on mechlancedot to get local mechanic bids on your vehicle repairs for free this way you can go direct and save thousands.
3.2 porsche cayenne 2005 ignition coil no 1 was faulty and drive around 30 km and it was fine but little bit misfire. when I replaced the new ignition coil the car start but not move and I diagnosed by computer now show these 3 codes p0261 , p0264 and p0267 which mean cylinder 1 ,2 & 3 injectors circuit low. please guide. I need to open the injectors or there is any short way .thanks
This video is great!
if you run your car on LPG , you wouldn't have that problem . would you?
Thanks for the info
VEE-HICCLES??? !!
this is crazee funny
hahahhahahahaaa
Where can I get this done in San Antonio, Texas?
+splashcat Your car dealership, i think even walmart.
a DR working on a car... umm ok!
interesting...
On The Rack with Dr John
hahahahahahahahahah, no pun intended,
hahahahahahahahahahah
How are you doing
give me back my non computerized cars an EMP cant kill them and they are better and easier to work on and fix down with the tree huggers
+Ed Brown I agree with killing tree huggers, but modern injection is the shit. No way you could ever have turbo charged engines with 1200+ HP on pump gas before this. No way you ever could have a naturally asperated engine with 700HP on pump gas and get 17 MPG as well. The only problem is the shit should be available to public to perform high pressure injector cleaning @ home. These morons are idiots
clearly an infomercial
big pun didn't debut til 98
omg this is so cheesy
Such bullshit. Run your car on a good reputable gasoline.
Dr John, hahahahahhhahaah
why are the using such poor lighting for this. the picture are rubbish u can hardly see any difference .
another way to make bucks
WTF?
only lies