Amazing!! I am doing more and more details on my dresses and tops but when I bought and cut this pattern I was stumped!! I carried on, lots of pintucks along the way and I got to the sleeve!! 😳😳 Thank goodness I came across your tutorial, otherwise this would not get finished. Even though the pattern has pictures and explanations it was nowhere as good as this tutorial.... thank you!! Thank you so much 😊
Great video! Thank you! I was trying to sew the placket to a shirt sleeve and COULD NOT GET IT TO WORK. Watched your video and it all became clear. Thanks again!! Subscribed!
OMG - I have been struggling all day to do this in a pattern I am making. I then found your video and it makes perfect sense to me now - Thank you SO much, great video x
How I wished I saw this tutorial before sewing my shirt sleeves, it would have make a lot difference... But I now know my mistakes and I will sew another shirt..thank you and remain blessed.
Thank you for publishing this tutorial. I bought a nice blouse from Ann Taylor and the sleeves were too long so I seam-ripped the cuff off, and cut the sleeves a few inches shorter, and was trying so hard to figure out how to put the cuff back on! It sure is much harder than I expected. This video has helped me a lot. It doesn't look like they used bias binding - just double folded the sides in. I was having a heck of a time trying to figure out what to do with the end of the slit after folding the sides. At this point, I probably won't add binding, but now I know to stretch my fabric straight around the inside point and fold it under as well, if I can! Thanks again.
Well, I ended up taking your advice and I did make a binding. I opened up their 'fold' and discovered it wasn't folded in like I thought, but they had used binding as well. Now to tackle the cuff...
Beautifully sewn! I am in awe of the fact that you don't trim the corners where it.may bulk up and.it.still looks perfect , laying smooth as if it is just one.or 2 layers but.is is at.least 4 . I love it and am in awe. Thanks again, Diane.
hi Cheryl, thanks for your comment. I know, a lot of home sewer cut ALL corners, I use more the industrial way, so only if necessary, like angle less than 90°. Also, if you think about it when you cut corner, you cut everything but the corner. I count 14 layers at the corner of the cuff with the bias fold, and my cuff was not fuse (+8).
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
I felt so obligated to leave a comment for you. You did such a wonderful job explaining, thank you so much.
This is the best refresher for a sleeve and cuff. Thank you so much.
Thank you, and thank you for not playing distracting music like so many other videos do
God bless you Diane, you have a gift. Thank you for choosing to share this gift with us.
A very clear and impressive tutorial!
I supper love your teaching style God bless you alwayes time👑
Amazing!! I am doing more and more details on my dresses and tops but when I bought and cut this pattern I was stumped!! I carried on, lots of pintucks along the way and I got to the sleeve!! 😳😳
Thank goodness I came across your tutorial, otherwise this would not get finished.
Even though the pattern has pictures and explanations it was nowhere as good as this tutorial.... thank you!! Thank you so much 😊
I made my first placket with no mistakes thanks to your clear instruction and excellent close ups while sewing. Thank you!
exactly the clear tutorial that works for me. thank you so much!
Thank you so much for this video Diane. I had no clue how to make the pleat at the top then I found you. My sleeve now looks professional!
Great video! Thank you! I was trying to sew the placket to a shirt sleeve and COULD NOT GET IT TO WORK. Watched your video and it all became clear. Thanks again!! Subscribed!
Excellent. I’ve sewn vents many times following several pattern instructions, and nothing has been as clear as this.
This was very well explained and thorough !
Thank you very much , madame Diane !
Thank you very much! I use your channel as a library - and you explain really everything I need to know for my sewing projects!
OMG - I have been struggling all day to do this in a pattern I am making. I then found your video and it makes perfect sense to me now - Thank you SO much, great video x
I'm a new viewer. I'm embarrassed to admit that I've been binge watching your videos... *smile*. You are an excellent teacher. Thank you Diane.
you teach me too (binge = with excess) I love it!
Diane, you're so humble and you teach so well. God bless you!
Diane, your videos are SO helpful, you have no idea. Thank you so much!
Thank you for yet another fabulously helpful video! I love your precise details and explanations.
Watched this sound off and still got 100% of it. Well explained, thanks.
Many thanks for sharing this beautiful tutorial I love it😍😍👍
Wow you are soooo good at explaining how to do things in a perfect way. Thank you 💞
Hi Diane! Thank you for showing the trick of sewing the corner part of the sleeve slit.
How I wished I saw this tutorial before sewing my shirt sleeves, it would have make a lot difference... But I now know my mistakes and I will sew another shirt..thank you and remain blessed.
Thank you for publishing this tutorial. I bought a nice blouse from Ann Taylor and the sleeves were too long so I seam-ripped the cuff off, and cut the sleeves a few inches shorter, and was trying so hard to figure out how to put the cuff back on! It sure is much harder than I expected. This video has helped me a lot. It doesn't look like they used bias binding - just double folded the sides in. I was having a heck of a time trying to figure out what to do with the end of the slit after folding the sides. At this point, I probably won't add binding, but now I know to stretch my fabric straight around the inside point and fold it under as well, if I can! Thanks again.
Well, I ended up taking your advice and I did make a binding. I opened up their 'fold' and discovered it wasn't folded in like I thought, but they had used binding as well. Now to tackle the cuff...
this is so well explained!
many thanks!👌👏
Another fantastic sewing tutorial! Thanks so much!
You are the master!
Fabulous explanation thank you!!! I've been staring at my pattern instructions for ages and you have just explained it beautifully.
Thank you, I was about to give up! You made it very clear.
Beautifully sewn! I am in awe of the fact that you don't trim the corners where it.may bulk up and.it.still looks perfect , laying smooth as if it is just one.or 2 layers but.is is at.least 4 . I love it and am in awe. Thanks again, Diane.
hi Cheryl, thanks for your comment. I know, a lot of home sewer cut ALL corners, I use more the industrial way, so only if necessary, like angle less than 90°. Also, if you think about it when you cut corner, you cut everything but the corner. I count 14 layers at the corner of the cuff with the bias fold, and my cuff was not fuse (+8).
This tutorial was amazing! Clear easy instructions, thank you!
Really need this, after many attempts of binding that slit! Thank you so much. Great visual demonstration.
Great teaching as usual. Looking forward to the basic shirt video. Thank you.
Огромное спасибо. Наконец-то я поняла технологию шитья манжета рукава .
мое удовольствие
You're amazing explainning everything so clear and simple! Love from Argentina! ♥️
Thank you for this video, feel like I’m prepared for my next step on my shirt. Thanks for sharing your knowledge!
Thanks very much! Best video I’ve found on this. Can you explain why mens and women’s shirt sleeves are finished differently? Very interesting!
You have such a pleasant voice. Love your videos
Thanks Dianne, another good video.
Thank you. I’m making Burda 6326 shirt and I have no clue when reading the instructions. Lucky I found your tutorial here!
Excellent video..Tried 3 times & finally got it..Thank you very much...
I was doing homework and so struggling with the cuff, You saved me, thank you for the video 😘😘
Clear and simple instructions. This woman knows how to communicate sewing techniques.
This was great! My shirt slit was wonky and looked wrong and I couldn't figure out why. Your clear instructions helped me. Thank you!
Thank you Diane. This video explained sewing a cuff perfectly for me. Thank you. Best wishes Ann
Enjoyed the teaching
Thank you so much for sharing your knowledge
Hi, Diane, a beautiful tutorial, as usual, it is precise and easy to understand and follow.
Thank you so much, I do appreciate your efforts and I have learned too many things from you. Merci beaucoup 💐
Ok. Thankyou. My blouse is waiting for its sleeves and cuffs! Im using Vogue 9029
Thank you for your work and generosity ❤️
Thank you Ma'am you really have explained so well and with patients. God bless you always.
Thankyou so much! I was stumped to know how to do this and you made it so easy!
That was perfect ❤ thank you
Thanks for your efforts and excellent teaching
Thank you for the excellent tutorial.
Great video. So easy to understand....more videos please
You really cover each and every point to install cuff and bias. Well Done. 👌👌
Thank you for this lesson. It was easy to follow. I did it right.
Extremely helpful. Thank you very much.
Fantastic tutorial! Thank you.
you are a life saver.
Great lesson .Thank you very much !!
Amazing explaining！ Love it！Thank you！
Hi Diane very informative video. Just wanted to know what should be the measurements of the piece that's going to be the cuff
Great video ! excellent explanations and exquisite finishing of the final product! Thank you for sharing, very helpful !
Thank you so much for this
Love It! Thank you!
🙏🙏🙏♥️♥️♥️ thank you so much..💐💐💐💐
Excellent 👌👌👌👍👍👍
Grat video, More please. Thanks for shearing your knowledge.
I like you n the way you give the inoirmation.thank u so much.i wish i could one day n to learn from u live!thank u !!!!!so muchhh🌹
Thank you!
Do you have a video where you show how to cut the arm sleeve, which you use in this video?
Thank you
Thank u so much
Thank u nice lady; I like it 🤙🏻
Thank you so much so much ~ 💙
thanking you so much!!!!
You're great
مرحبأ...قناتك مفيدة لكنها بحاجة الى الترجمة العربية لأن الكثير من العرب يتابعونك.🌹🌹🌹
I would like to do this in a sleeve at the top of the arm so there is a slit from top to bottom ,will it work
Obrigada pela vídeo aula
Nice
what sorcery is this??
Thanksss😘
Tx
Can you use this for denim jacket
Hello
The way I sew the cuff yes for sure, but the sleeve opening is usually different, mush easier in a seam and there is no pleats.
Diane
Can you do a video on how to cut the sleeve for denim jacket
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻💖💖💖💖💖
Please repeat the link where you explain in french language
voila th-cam.com/video/Zna-Okjgzx4/w-d-xo.html n'oublie pas de t'abonner et de partager