This is so dope! I'm also a woodworker and a coffee aficionado so I understand exactly what type of machine this is and how hard it was to make it. I'm actually really surprised this didn't get more traction on the interwebs. I think you kind of undersold it with just a 6 minute video covering the whole thing. The skills you got out of this though are priceless!
because this is like saying you invented a new wrench. you should actually be familiar with a wrench before you claim it needs another invention. all this did was replicate existing manual lever machines with no benefit. and more and more of this same lever machine has being created by others since your comment, with only slapping better looks/materials on it. as a manual lever user, there is nothing more to improve on what is perfect for what it is. there actually is more improvement on the coffee side of how to extract it, that i learned from using a manual. and that is the disconnect. i doubt this guy even used his machine 20 times. probably doesn't even touch it at all.
Idk how this only has 700 some odd likes. I just had a thought. “I wonder if I could make my own espresso maker”, and low and behold I found your video. Now I know I can’t. What you’ve done is amazing though!
You could definitely do it by using more parts from other machines though. Making your own group or boiler is not gonna be easy but sourcing materials from broken machines and building your own that way is much easier. Doesn't have to be a manual lever, might seem simple but requires more custom work if you're not gonna use a pre existing lever group.
Great to see a new vid from you! I have to say, I have designed some tricky parts for others to machine, but if you were able to learn to use a CNC machine tool and make all this beautiful and sophisticated stuff in 1 year, you got a lot of skills! The silicone seals are so clean, and the machining to make the molds is not apprentice-level stuff. Huge kudos for mastering all that in a short time! And it's great to see you again, too.
2:34 Pipe thread has a path around it that makes it require sealant of some sort. 4:00 That's exactly how I had to move my 3-phase lathe. I gotta check out the website but I'm hoping you've made kits where I can purchase just the parts that would require machining, as I'd like to incorporate them into my own design for the overall body/lever assembly. Thanks for the video!
Thanks! I’ve actually talked to him. He has a strict policy not to review products before a crowdfunding campaign. So, if the Kickstarter is successful, he might be open to reviewing it afterwards. That said, here’s a link to the Kickstarter www.kickstarter.com/projects/2064847582/leverhead-espresso-machine Don’t be afraid to share it 😉
Hi man, this is a great project! This deserves to be produced on demand! There's one specific thing that strikes me about it, specifically the seals made with custom molds. I have a spring lever machine for which I'd like to make silicone piston seals. Would you mind recommending a silicone solution to pour into the mold? Thanks a lot!
@@OneMinuteWorkbench One more thing, you're showing a large u-cup without a center piece at 04:56 . That's very close to the shape of my seal. Am I right that the mold 3 parts? The lid isn't shown and it has a cylinder part that goes till the bottom and 2 holes above the u-cup for the solution ? So the lid is kind of like this (side view), apologies for the drawing: ---- * |____| * ---- * |____| * ----
It depends on how you do it…you might not need a 3rd part. You can set it on a level surface and carefully pour to the right level. If you do create a 3rd part, you’ll have to create vents for air bubbles. If you only need a seal or two, you can get away without a lid.
the One Million Minute Cup of Coffee. Missed you, glad Ur back. FYI, my motorhome has a 3000psi o-ring based hydraulic system, so do backhoes, etc. Ring fit is critical, ring capture, & sometimes stacking o-ring/square-ring in the same capture groove is what it takes. But making one off custom rings of course will "rule them all"
Hey Dude! Great machine, I really like the thermal insulation. Sad to see the kickstarter didn’t find traction. If I might make a suggestion if it’s going to live on the counter it should look more like art. I know BB is a better material but a walnut baseplate and bearing block would simplify the design. Mill the replacements for the red bits and swap the Philips heads and I think you’d have a much prettier machine to advertise. In any case you’ve earned my sub! Hope you’re still making wicked stuff!
So glad I ran across your channel. Building and setting up a workshop like yours from what I had gathered in this video is what I always had in mind for my golden years! 🫡🫡
Tommy, looks well considered throughout. Looking at the kickstarter, looks like you need more punch, you should consider getting some of the coffee literati on TH-cam to do a review to drum up some interest in what would be one of the most affordable high quality espresso setups out there.
I’ve reached out to a few, including the big man himself (James Hoffman), he has a strict policy to to review preproduction units, but would be open to reviewing it after the Kickstarter…if it succeeds. Yeah I’d really hate for this to go by the wayside…I know I’m biased, but I’ve used a lot of machines, and this one is really great. Using those other machines and finding out the things about them I didn’t like helped shape this one into what it is. I’m all ears to any ideas!
That was awesome! I am a home roaster and will definitely look into your project. As I was watching I was hoping you would offer these on a retail basis, but to get at least some ROI you would have to charge $4 or $5,000 per machine, what with all the time and materials that went into it. Well done!
Kevin, thanks for your interest! I'm not sure about a video, but send me an email (through the contact form: oneminuteworkbench.com/support/contact/), and I'll make sure to send you an update. I hope this helps!
Problem with this kind of machines, is temp control. It's pretty hard to get such an arrangement that is not connected to a boiler to a reliable temp and after its heated up a bit, you are forced to act quickly. Outerwise you get coffee that was brewed way too cold. This concept makes more sense with less expensive devices like the Neo from Flair.
Thank you! In order to make a machine that worked this way (less preheating than other manuals), I had to invent new seals. That said, if the Kickstarter succeeds, the new seals will be readily available - keeping my fingers crossed! 🙂
@@OneMinuteWorkbench it will be successful. Have you posted the kickstarter on any of the forums like home barista or Facebook groups dedicated to espressos
@@timmun2001 I haven’t. Those forums have rules against owners promoting their own products, and I am very respectful of their rules. I personally read home-barista all the time, and love the site though. By the way, thanks for the vote of confidence!
How has your experience been with thermal management? Your group head is pretty large, so I would assume it takes quite a bit of pre heating to maintain temp. Great video by the way! I really admire this type of work.
That sounds like a great idea! I would love to have that and some rough plans. I need one of these and have the machines I need to make it…. I just don’t have time to reinvent it myself!
Nice, I wish somebody did something like this, but with a super small portafilter that had the size and shape of a nespresso capsule, so that it could be used both for ground coffee and nespresso capsules.
Looks a cool machine. I think that a mini series of how you got there would be awesome. I love watching something develop from ideas and process, fails and wins. I guess the struggle is real but it’s how you keep pushing through that makes the real difference! Bloody great one though 🤙🏻✌🏻🤟🏻
@@OneMinuteWorkbench There's a guy building a 2 stroke engine somewhere in Europe who I have followed, not because I am interested/want/like 2 stroke engines, but because he chronicles his failures and things he's learned along the way. He works a lot on the cylinder hardening process on the aluminum bore, then keeping the hardening in a cylinder shape as it heats/cools. The lessons, failures, innovation, and education are wayyyy more valuable to a maker than assembling some bullshit thing from ikea that "just works" Blazing trails is what this nation was founded on and keeping that spirit alive is the essence of good.
This is the first time I've heard of your espresso machine. What are your plans for the Leverhead? I can see this gracing the counters of all those camper vans out there as well as minimalist countertops at home.
Hey Everybody, please help me reach the Kickstarter goal by considering make a pledge: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine Thanks in advance!
Was there testing done regarding temperature stability? 5 second preheat for stable temperature would be huge for light roasts but I don't see any testing done
I’m working on a video that covers what can be expected when it comes to temperatures, and hope to have it on the campaign page in the next day or so. I’ll come back here and update this thread when it’s ready. I hope this helps!
The video showing temps has been added to the campaign page - here's a link: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine?ref=user_menu I hope this helps!
@@outofthebox9913 😂 I thought that comment was for a repair video I just put out. That said, I’m still trying to work out the numbers to bring this to life. Feel free to send me an email through the website and I’ll add you to the list of interested people. I hope this helps!
@@OneMinuteWorkbench ohh ok yeah I didn’t understand at first when you said good luck with the repair lol. Ok will do thanks. Seriously tho excellent work. I know that wasn’t easy to do but you did it. Keep it up and best of luck
Definately a labor of love. It does look like the progressions got smaller and more refined with each build. I wish you great success with this. It would be nice to "see it in action"? ?? ???
Thanks! There are more shots of it in action at the Kickstarter page - here’s a link: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine I hope this helps!
Nice silicone moulds, I am wondering how you injected silicone there, by using smth like syringe? Also why aluminum? I am using plastic. Are you vacuuming the silicone before injecting it? Nice work.
I personally am not a coffee or espresso drinker but that looks like one hell of a machine! Now you need to make a similar machine for us Tea drinkers. Good to see you posting again! 👍👍😉😉
ok - job well done. But what does this one do differently to the Rok/Flair/Robot manual espresso machines? Maybe James Hoffman could give it a go... :-P
Thank you! I know I’m biased, but I think it offers several advantages. Check out the Kickstarter video, and you’ll find more info on the technical points. I hope this helps!
Thanks for the question! This machine offers an improved workflow (less preparation, less effort, easier cleaning, no preheating required). Have a look at the Kickstarter page to learn more: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine I hope this helps!
Fantastic work, dude! Really well done! 😃 I have an electric espresso machine here at home and, damn... It's crazy complex! 😬 But I have to agree, it's totally worth it! Anyway, stay safe there with your family! 🖖😊
Nice work. I enjoy espresso at home as well, so I find the product itself quite interesting, however, I'm not (at least yet) such a coffee nut that $500 seems a sensible amount to spend on such a thing. I think it would have been really cool to follow along with your adventure this past year with a video series. You could still make some sort of video series from your footage, but it wouldn't be as good now, knowing the outcomes (failures) ahead of time.
You probably know this but swirling your espresso will off gas aromas and you'll lose some flavors, if you gently draw a small spoon directly across the crema once or twice and then sip it'll have a wildly different flavor
Just a question, why did you have to machine the silicone? Could you not have made the silicone with 3d printed parts? Or, did you just make them out of machine parts so you can replicate the silicones easier for resale?
I started with 3D prints for the seal molds and they produced seals that worked, but not with a very high quality surface finish. The aluminum molds make excellent quality parts, and yes, also make it more repeatable. Great questions - thanks for asking!
It's a shame the Kickstarter failed. Would you consider doing a one-off custom product run? Surely there are people out there who would want to buy custom-made espresso machines.
Congrats to a very interesting project! Have you asked James Hoffmann for his opinion on your machine? I bet if you could convince him about the qualities of it and he was willing to talk about it, your potential audience might advance!
Thanks! I did reach out to James, and he said he has a strict policy not to review preproduction units, but would be open to reviewing a production version. The Kickstarter is moving slow, so we’ll see. It might take some time to get it off the ground, but I really think people will love it when they get their hands on it.
$499 for a handmade espresso machine? I guess to some people that would be doable, but it's too rich for my blood. May be a tough sell considering Amazon has espresso machines starting at $45.
This is so dope! I'm also a woodworker and a coffee aficionado so I understand exactly what type of machine this is and how hard it was to make it. I'm actually really surprised this didn't get more traction on the interwebs. I think you kind of undersold it with just a 6 minute video covering the whole thing. The skills you got out of this though are priceless!
because this is like saying you invented a new wrench. you should actually be familiar with a wrench before you claim it needs another invention. all this did was replicate existing manual lever machines with no benefit. and more and more of this same lever machine has being created by others since your comment, with only slapping better looks/materials on it.
as a manual lever user, there is nothing more to improve on what is perfect for what it is. there actually is more improvement on the coffee side of how to extract it, that i learned from using a manual. and that is the disconnect. i doubt this guy even used his machine 20 times. probably doesn't even touch it at all.
Idk how this only has 700 some odd likes. I just had a thought. “I wonder if I could make my own espresso maker”, and low and behold I found your video. Now I know I can’t. What you’ve done is amazing though!
Thanks!
You could definitely do it by using more parts from other machines though. Making your own group or boiler is not gonna be easy but sourcing materials from broken machines and building your own that way is much easier. Doesn't have to be a manual lever, might seem simple but requires more custom work if you're not gonna use a pre existing lever group.
😅 @beenstucinredclay same.
Congratulations on staying with your project until completion! I would really like to see an entire video on making custom seals. Looks awesome!
Thanks, and thanks for the suggestion!
@@OneMinuteWorkbench Yup me to, that would be interesting!
I re-watch your old videos every now and then. Always the tool wall and carts. Using your push sticks every week. Seeing a new video is exciting.
Thanks 🙂 it feels good to make a new video!
Great to see a new vid from you! I have to say, I have designed some tricky parts for others to machine, but if you were able to learn to use a CNC machine tool and make all this beautiful and sophisticated stuff in 1 year, you got a lot of skills! The silicone seals are so clean, and the machining to make the molds is not apprentice-level stuff. Huge kudos for mastering all that in a short time! And it's great to see you again, too.
Thank you for the really awesome compliment!
@@OneMinuteWorkbench It is, as they say, "evidence-based"...
2:34 Pipe thread has a path around it that makes it require sealant of some sort. 4:00 That's exactly how I had to move my 3-phase lathe.
I gotta check out the website but I'm hoping you've made kits where I can purchase just the parts that would require machining, as I'd like to incorporate them into my own design for the overall body/lever assembly. Thanks for the video!
Glad to see you posting videos again - the machine looks great
Thank you, Jarrod!
Glad you’re still out there kicking man. It’s good to have you back 👍🏻
Thanks!
Glad to see you back! You're the first creator I watched on TH-cam
🙂
Missed you, thanks for the update and WOW!
I was just wondering about you this weekend. Great to see you back!
Thanks, it feels good to be making videos again 🙂
Welcome back, nice to see More Videos Form One Minute Workbench
Thanks! It’s good to be back!
Send one to James Hoffmann, if he likes it the sales will go through the roof! Love the looks of it!
Thanks! I’ve actually talked to him. He has a strict policy not to review products before a crowdfunding campaign. So, if the Kickstarter is successful, he might be open to reviewing it afterwards. That said, here’s a link to the Kickstarter www.kickstarter.com/projects/2064847582/leverhead-espresso-machine Don’t be afraid to share it 😉
Good to see you back. Hope your project does well
Thanks!
Hi man, this is a great project! This deserves to be produced on demand!
There's one specific thing that strikes me about it, specifically the seals made with custom molds.
I have a spring lever machine for which I'd like to make silicone piston seals.
Would you mind recommending a silicone solution to pour into the mold? Thanks a lot!
Thanks! I’d check out smooth sil 960…it’s the ONLY thing I’ve found that works.
@@OneMinuteWorkbench
One more thing, you're showing a large u-cup without a center piece at 04:56 . That's very close to the shape of my seal.
Am I right that the mold 3 parts? The lid isn't shown and it has a cylinder part that goes till the bottom and 2 holes above the u-cup for the solution ?
So the lid is kind of like this (side view), apologies for the drawing: ---- * |____| * ---- * |____| * ----
It depends on how you do it…you might not need a 3rd part. You can set it on a level surface and carefully pour to the right level. If you do create a 3rd part, you’ll have to create vents for air bubbles. If you only need a seal or two, you can get away without a lid.
Great to see you back. You have been missed. What a show case of skills. Well done.
Thank you so much! It’s good to be back 🙂
Looks incredible! Welcome back man!
Thanks!
the One Million Minute Cup of Coffee. Missed you, glad Ur back.
FYI, my motorhome has a 3000psi o-ring based hydraulic system, so do backhoes, etc. Ring fit is critical, ring capture, & sometimes stacking o-ring/square-ring in the same capture groove is what it takes. But making one off custom rings of course will "rule them all"
My precious 😂
Great job of making this Espresso Machine! It looks really good too. Thanks for sharing this.
Thank you!
Very cool!!!! I’m not a coffee or espresso drinker but this might get me started. Good to see you back at it!!
Never too late to pick up a new addiction 😉 it’s good to be back!
Hey Dude! Great machine, I really like the thermal insulation. Sad to see the kickstarter didn’t find traction.
If I might make a suggestion if it’s going to live on the counter it should look more like art. I know BB is a better material but a walnut baseplate and bearing block would simplify the design. Mill the replacements for the red bits and swap the Philips heads and I think you’d have a much prettier machine to advertise.
In any case you’ve earned my sub! Hope you’re still making wicked stuff!
Congratulations on joining the Tormach family with your PCNC 440! We hope it helps you reach well past your Kickstarter goals!
Thank you!
Fantastic share Tommy and great to see you back mate.
Thanks! It feels good to be back 🙂
So glad I ran across your channel. Building and setting up a workshop like yours from what I had gathered in this video is what I always had in mind for my golden years! 🫡🫡
Dang, it would’ve been cool to compare this to the flare 58. Sucks that the Kickstarter didn’t make it.
I’m still working on making the numbers work…also have a new (more portable) version in the works 😉
Nice! Is it coming soon? 👀
Tommy, looks well considered throughout. Looking at the kickstarter, looks like you need more punch, you should consider getting some of the coffee literati on TH-cam to do a review to drum up some interest in what would be one of the most affordable high quality espresso setups out there.
I’ve reached out to a few, including the big man himself (James Hoffman), he has a strict policy to to review preproduction units, but would be open to reviewing it after the Kickstarter…if it succeeds. Yeah I’d really hate for this to go by the wayside…I know I’m biased, but I’ve used a lot of machines, and this one is really great. Using those other machines and finding out the things about them I didn’t like helped shape this one into what it is. I’m all ears to any ideas!
Welcome back, amigo!
Thanks!
I’m very happy to see you back on TH-cam 🙏🏽❤️
Thanks 🙂
Is good to see you again. your videos and projects are awesome.
Thanks!
Really looking forward to some new woodworking vids, loved the MicroShop build series.
More coming soon!
Looks like a nice machine, Tommy. It's good to see content from you again.
Bill
Thank you! It feels good to be back 🙂
Amazing! Really looks Great! I can’t Waite to buy one!
Thanks!
You post as many or as little videos as you can muster. Those of us that enjoy your content will be here to watch them.
Thank you so much! That makes my day 🙂
That was awesome! I am a home roaster and will definitely look into your project. As I was watching I was hoping you would offer these on a retail basis, but to get at least some ROI you would have to charge $4 or $5,000 per machine, what with all the time and materials that went into it. Well done!
What is roi?
@@smashyrashy Return on Investment
Thank you!
Every time I see that thing push out the Joe, I want a sip! Looks good, cant wait to try some!
Thanks man!
Well done man! As a coffee lover you have satisfied my daily dose of coffee nerdism. =)
Great to see you back👍😁
Thanks!
Great to see you have returned.
Thanks!
to be fair, regarding most of the prototypes. you are the first person i have ever seen to try an make an espresso machine out of wood.
Will you make another video nearing the kickstarter deadline? I don't have an account to sign up for reminders
Kevin, thanks for your interest! I'm not sure about a video, but send me an email (through the contact form: oneminuteworkbench.com/support/contact/), and I'll make sure to send you an update. I hope this helps!
I'm glad you're back, I thought someone un-subscribed me as a poor joke. Awesome hand pull there Tommy. Jim
Thanks, Jim!
Looks like a very polished piece of kit, no pun intended!
Thanks!
Long time no see. I am glad to see your videos again
Next level ability!!! I so don’t have this kind of engineering mind but I am fascinated by those who do! Way to go!
Thank you!
Problem with this kind of machines, is temp control. It's pretty hard to get such an arrangement that is not connected to a boiler to a reliable temp and after its heated up a bit, you are forced to act quickly. Outerwise you get coffee that was brewed way too cold. This concept makes more sense with less expensive devices like the Neo from Flair.
I I have access to a lathe, I'd love some plans to buy, and also if you are selling a physical seal kit would be nice!
Nice machine! Off the shelf seals would have been nice for when it comes to replacements down the road
Thank you! In order to make a machine that worked this way (less preheating than other manuals), I had to invent new seals. That said, if the Kickstarter succeeds, the new seals will be readily available - keeping my fingers crossed! 🙂
@@OneMinuteWorkbench it will be successful. Have you posted the kickstarter on any of the forums like home barista or Facebook groups dedicated to espressos
@@timmun2001 I haven’t. Those forums have rules against owners promoting their own products, and I am very respectful of their rules. I personally read home-barista all the time, and love the site though. By the way, thanks for the vote of confidence!
How has your experience been with thermal management? Your group head is pretty large, so I would assume it takes quite a bit of pre heating to maintain temp. Great video by the way! I really admire this type of work.
Long time no see, Thanks for sharing that!
Thank you!
Nice work, coffee enthusiast here 😊 how about selling those seals and other hard-to-make-yourself-parts so that others can build their own machines?
That’s a great idea!
That sounds like a great idea! I would love to have that and some rough plans. I need one of these and have the machines I need to make it…. I just don’t have time to reinvent it myself!
Nice, I wish somebody did something like this, but with a super small portafilter that had the size and shape of a nespresso capsule, so that it could be used both for ground coffee and nespresso capsules.
simply ...so great in its simplicity !
Looks a cool machine. I think that a mini series of how you got there would be awesome. I love watching something develop from ideas and process, fails and wins. I guess the struggle is real but it’s how you keep pushing through that makes the real difference! Bloody great one though 🤙🏻✌🏻🤟🏻
Thanks, Paul! I’ll consider putting together a series 🙂
@@OneMinuteWorkbench There's a guy building a 2 stroke engine somewhere in Europe who I have followed, not because I am interested/want/like 2 stroke engines, but because he chronicles his failures and things he's learned along the way. He works a lot on the cylinder hardening process on the aluminum bore, then keeping the hardening in a cylinder shape as it heats/cools. The lessons, failures, innovation, and education are wayyyy more valuable to a maker than assembling some bullshit thing from ikea that "just works" Blazing trails is what this nation was founded on and keeping that spirit alive is the essence of good.
Awesome. Do you have plans for sale?
This is the first time I've heard of your espresso machine. What are your plans for the Leverhead? I can see this gracing the counters of all those camper vans out there as well as minimalist countertops at home.
Awesome expresso machine😎 challenge would you be able to make a stove top expresso/cuppaccino machine out of an old pressure cooker ? ..
Hey Everybody, please help me reach the Kickstarter goal by considering make a pledge: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine Thanks in advance!
Was there testing done regarding temperature stability? 5 second preheat for stable temperature would be huge for light roasts but I don't see any testing done
I’m working on a video that covers what can be expected when it comes to temperatures, and hope to have it on the campaign page in the next day or so. I’ll come back here and update this thread when it’s ready. I hope this helps!
The video showing temps has been added to the campaign page - here's a link: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine?ref=user_menu I hope this helps!
Why didn't you use hydraulic seals?
They are made for higher pressure's.
Did the kick starter on this end? Does this thing make a decent exspresso? If so i am interested for sure.
I’ve been saying I wanted to do this for so long and everyone I know says it’s impossible. Great job
Will you be selling any of those in the future
@@outofthebox9913 😂 I thought that comment was for a repair video I just put out. That said, I’m still trying to work out the numbers to bring this to life. Feel free to send me an email through the website and I’ll add you to the list of interested people. I hope this helps!
@@OneMinuteWorkbench ohh ok yeah I didn’t understand at first when you said good luck with the repair lol. Ok will do thanks. Seriously tho excellent work. I know that wasn’t easy to do but you did it. Keep it up and best of luck
Definately a labor of love. It does look like the progressions got smaller and more refined with each build. I wish you great success with this. It would be nice to "see it in action"? ?? ???
Thanks! There are more shots of it in action at the Kickstarter page - here’s a link: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine I hope this helps!
So is there no way to buy yours?
Nice silicone moulds, I am wondering how you injected silicone there, by using smth like syringe? Also why aluminum? I am using plastic. Are you vacuuming the silicone before injecting it? Nice work.
Thanks! I’m actually just pouring them, and I have strategic vents that let the molds fill. And yes, vacuuming the silicone before the pour.
One Minute Workbench pouring through vents? or just when the mould is open?
@@dmyegorov74 both, depending on which mold it is. There are 3 total, and each one works a little differently from the others.
What’s happening with the fundraiser? I’m interested. Thanks
Beautiful!
I wonder what would happen if you retry the Kickstarter campaign with a little marketing?
Sorry to see that your kickstarter campaign didn’t work. I’m curious, do you sell your espresso machine’s anyway?
I personally am not a coffee or espresso drinker but that looks like one hell of a machine! Now you need to make a similar machine for us Tea drinkers. Good to see you posting again! 👍👍😉😉
Thank you! I’ll have to start on the one year tea adventure now 😂
Any chance I could commission you to make another one?
Totally forgot I was subscribed to this channel, then this popped into my feed
I hope that’s a good thing 😂
ok - job well done. But what does this one do differently to the Rok/Flair/Robot manual espresso machines? Maybe James Hoffman could give it a go... :-P
Great minds clearly think alike - I've just message James with a link to this video. :)
Thank you! I know I’m biased, but I think it offers several advantages. Check out the Kickstarter video, and you’ll find more info on the technical points. I hope this helps!
It's a shame that kick starter didn't go through.. that's an amazing project.
And then there is the Flair that has been on the market for some time. Less expensive too. Other levers out there too, what's special about this one?
Thanks for the question! This machine offers an improved workflow (less preparation, less effort, easier cleaning, no preheating required). Have a look at the Kickstarter page to learn more: www.kickstarter.com/projects/2064847582/leverhead-espresso-machine I hope this helps!
Welcome back! So are you changing the channels name to 1 year workbench?
Not yet…let’s just see how the next year goes haha 😂
Fantastic work, dude! Really well done! 😃
I have an electric espresso machine here at home and, damn... It's crazy complex! 😬
But I have to agree, it's totally worth it!
Anyway, stay safe there with your family! 🖖😊
Thank you!
Late to the party. Can this be purchased directly from you?
Very nice project
Thank you!
nice to see u again ♥
Thank you 🙂
Thanks TH-cam. Recommending this to me 2 years later. I hope you didn't stop at the kikstarter campaign. Looks like an affordable viable product
Nice work. I enjoy espresso at home as well, so I find the product itself quite interesting, however, I'm not (at least yet) such a coffee nut that $500 seems a sensible amount to spend on such a thing. I think it would have been really cool to follow along with your adventure this past year with a video series. You could still make some sort of video series from your footage, but it wouldn't be as good now, knowing the outcomes (failures) ahead of time.
Thanks, and thanks for the feedback!
Is it out for sale? Thank you
This one never got off the ground, but I’m working on new models right now. Stay tuned!
You probably know this but swirling your espresso will off gas aromas and you'll lose some flavors, if you gently draw a small spoon directly across the crema once or twice and then sip it'll have a wildly different flavor
Just a question, why did you have to machine the silicone? Could you not have made the silicone with 3d printed parts?
Or, did you just make them out of machine parts so you can replicate the silicones easier for resale?
I started with 3D prints for the seal molds and they produced seals that worked, but not with a very high quality surface finish. The aluminum molds make excellent quality parts, and yes, also make it more repeatable. Great questions - thanks for asking!
@@OneMinuteWorkbench great build! :)
Thanks 🙂
So super cool!!! Wow!
Thanks!
Awesome build! You should change your channel name to One Year Espresso Machine! 😉
lol
Are you planning to sell?
Amazing work ...loved watching you create.Mike's mom.
Thanks!
La Marzocco is fission, Leverhead is cold fusion
It's a shame the Kickstarter failed. Would you consider doing a one-off custom product run? Surely there are people out there who would want to buy custom-made espresso machines.
Working on it right now. Stay tuned.
Hello! I see that your Kickstarter was unsuccessful... that's a shame! Are you still making and selling these?
Hes alive!
😂
Awesome , i like it 👏👏👏
if its cheaper than the flair 58 it will be great
Get Hoffman in on this!
Exactly what I was thinking
We’ll see 🙂
He lives!😁
Haha 😂
Impressive to say the least
Thanks!
Congrats to a very interesting project!
Have you asked James Hoffmann for his opinion on your machine?
I bet if you could convince him about the qualities of it and he was willing to talk about it, your potential audience might advance!
Thanks! I did reach out to James, and he said he has a strict policy not to review preproduction units, but would be open to reviewing a production version. The Kickstarter is moving slow, so we’ll see. It might take some time to get it off the ground, but I really think people will love it when they get their hands on it.
@@OneMinuteWorkbench Thanks for the response! I wish you all the best for your Kickstarter!
You should hook up with Shane Wighton of Stuff Made Here. I'm sure he could give you metal milling and Tormach CNC tips.
Thanks for the suggestion!
$499 for a handmade espresso machine? I guess to some people that would be doable, but it's too rich for my blood. May be a tough sell considering Amazon has espresso machines starting at $45.
Thanks for sharing your thoughts!