This is a great diy video. The whole job took just over an hour and cost $22.00 and really gives it a modern look. The tip about the duct tape made pulling them easy.
Just finished this upgrade. What a difference. This video helped a lot, especially with the accessing of the bulbs. It was nerve racking thinking I was going to break a cover or two on my new pro lol! That was such a good idea with the map lights and the tape. Thanks for the video and suggestions on the lights!
Just ordered, received and installed recommended Yorkim LED'S. As a side note, the 194's came with a small pry tool. I ordered a set I guess they will come in handy on another mod. New lights are soooo much better. Keep up the great work and thank you for your service.
Just finished installing all of these, makes a HUGE difference! Thank you so much for the amazing walk through, made it super easy.. mostly.. half the time spent was just pulling those f-ing front center bulbs out.. 😡 Thanks again!! 🙏
Thanks to your videos. I pulled the trigger and bought led lights for my fogs, high, and low beams. Also bought my interior led lights. I gained more confidence with your videos. I went ahead and stuck with auxbeam for the outside. I liked the idea of just plug and play. I really didn’t wanna drill a hole I. The dust cover. Went with the Oxilam for the interior. Very well priced and the reviews were well. Keep up the great work
Awesome video man! Just did this to my 2016 4runner trail following your instructions. It was so easy and the lights look 10x better. Can't believe Toyota doesn't include these stock. Upgrading my back up lights and headlights next. Keep up the solid content!!
So I watch a lot of youtube videos and my roommate just bought a 2018 4runner and wants to change out all of the interior lights. Your video was spot on and this will make it super simple for him to install the leds. Great video but I have just one question. What 5 idiots would give this video a thumbs down? It couldn't be any clearer on how to install the leds. Some people.....
Simple and cost effective thanks for the tips! Got mine done in 20 mins and it saved me some cash. Some folks want to charge 3 to 5 times what these bulbs cost.
I think you should try to do some reviews on the lasfit bulbs. The t10s come in many colors for $8 to $11 a set of 2. The dome lights are about the same. And they are bright as heck. See what you can do with that brand. I've got everything on my car from lasfit. No flickering and bright as always. I am certain those might flicker before too long and that gets annoying
Great video - super simple and easy to follow. Thank you for listing the bulbs in the description. Any chance you have a video or are planning one for wiring installation for ditch lights/light bars?
Thanks for the very very helpful vid. I don't know if you had an issue the bulb in the dome light but i bought the same 3022 led bulbs you used and they are just a hair to big and would not fit. They worked fine in the cargo door but there is much more room there. Otherwise the rest of the bulbs worked great. Thanks again.
It was a pain to get that dome light. I was just a tad to big but still able to seat it up there. Hasn’t come loose yet. Idk why it fits like crap when the tailgait ones fit perfectly
Let me ask you a question if you don't mind. I watched you video about the dislikes and thought you were spot on. My question is: did the plethora of owners manuals in your PRO come in a dealer's 1970's style paper envelope? I can't believe mine did. Even my 1999 cherokee has a vinyl folder for the manuals.
Thanks for this video! I just finished swapping all of my interior bulbs to OXILAM LEDs! I love the crisp white color and can’t wait until tonight to see them in the dark
Blue TRD Jon my only complaint (which has nothing to do with you lol) is that the dome/cargo lights (3022) don’t quite match the map/vanity (194) bulbs in color output. I had really hoped that by ordering both types from the same manufacturer that they would match perfectly. It’s not super noticeable, but if you’re looking for it you can tell, it’s basically just enough of a difference to irritate me
Hey great video!!! I ordered a kit with all the interior, mirror, and backup lights on amazon for 25 or 26$. Just letting you know that they do offer full interior kits for less than 30$
The map lights are designed by Mr. Toyota to be replaced from the top. The upper console pops off and the lights come out with a quarter turn housing. Check it out.
So you have had these for 4 years. How have they held up? Any problems? Have you had to switch them? What are your thoughts after having them on for awhile?
HI Jon , great video as always. Question before I ordering those LED , when you closing the door's are the dim slowly like the original halogen one? Thank you in advance
22! Where did you get that pry tool? So I know with the old halogen bulb you want to be wearing gloves so your oils from your skip are not on the bulb. Do you know if the LED lights are the same? Yo that duck tape trick 😍😍
Hey Jon, I need to replace my map lights. Their flickering and are annoying as all. Are you still happy with this brand? If not, what do you recommend? Thanks
Blue TRD Jon Question: I am looking at Amazon for the 3022 lights. Which ones do I get as it seems the packaging has changed a bit. You video shows the 31mm 5050. It seems that now they have the 5730 or the 4014. I assume that I should get the 5730?
I install the lights in the lift gate without any issues today but I could not get the dome light in. I have a 2020 ORP. All three bulbs look the same but the part number on the dome light ends with a 99 and the lift gate end with a 94. I could never get the light to pop in on both ends.
New Subscriber here, Ive seen dozens of these LED interior light swap/upgrades vids on TH-cam...but not one of them has included one for the glove box, can you make one
Can I assume these are the same types of light for a 2020? I just bought mine 4runner through a Power of Attorney so I don’t have the vehicles manual on hand to find out what type of bulbs the 4Runner needs. Can I assume all 5th generations use the same bulb just different amounts?
I purchased these leds a year ago and now the dome and tailgate bulbs are dying. Just curious if you have had any problems or updated to another brand?
PLEASE BE CAREFUL!!!! installing it, i burned the BCM of my 4runner when accidentally touched positive with negative in the drivers curtesy light, so it looks a pretty expensive reparation and parts, sorry about my english, kind regards from chile
What’s the toughest part of the install? Just got my 2022 TRDPro after a 9 month wait. I have a dealer (outta state) that is selling at MSRP!! Hit me uo
These bulbs are trash. They will constantly burn out on you. Although the seller will send you a new set under warranty its not worth the headache. Dome tailgat3 and license plate bulbs kept burning out on me. I suggest getting better quality bulbs. Just my .02$
Check Amazon, you can get interior lights (LED) and it includes all of the interior, Mirrors, backup, and license plate. You can also filter by what fits your vehicle.
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
This is a great diy video. The whole job took just over an hour and cost $22.00 and really gives it a modern look.
The tip about the duct tape made pulling them easy.
Heck ya!
THE TAPE was a genius idea. I tried pliers and every other tool and could not get the MAP lights out. THANK YOU!
Just finished this upgrade. What a difference. This video helped a lot, especially with the accessing of the bulbs. It was nerve racking thinking I was going to break a cover or two on my new pro lol! That was such a good idea with the map lights and the tape. Thanks for the video and suggestions on the lights!
No problem!! I’m glad it all worked out for you. Thank you for you comment of how it helped. 😁
I just upgraded the lights on my 2016 4Runner, and this video was a big help! Thanks!
Thank you!! Glad it helped
Just ordered, received and installed recommended Yorkim LED'S. As a side note, the 194's came with a small pry tool. I ordered a set I guess they will come in handy on another mod. New lights are soooo much better. Keep up the great work and thank you for your service.
Oh neat that’s good to know. Thanks!
Put mine in today! I used needle nose pliers for removing map lights.
I just changed them on my 4Runner. All instructions were very clear. Thank's a lot! 🙂
No worries!!!
Just finished installing all of these, makes a HUGE difference! Thank you so much for the amazing walk through, made it super easy.. mostly.. half the time spent was just pulling those f-ing front center bulbs out.. 😡 Thanks again!! 🙏
Glad it helped!!
Thanks to your videos. I pulled the trigger and bought led lights for my fogs, high, and low beams. Also bought my interior led lights. I gained more confidence with your videos. I went ahead and stuck with auxbeam for the outside. I liked the idea of just plug and play. I really didn’t wanna drill a hole I. The dust cover. Went with the Oxilam for the interior. Very well priced and the reviews were well. Keep up the great work
I'm glad they were helpful!!! I appcreciate the kind words! Best of luck on the install!
I ordered these and installed last weekend. The instructions couldn't have been any better!
I was looking at other videos and light packages. gonna order these. thx you saved me a ton
Heck yes!!!
Excellent video. Great tip with the tape, I don't think I would have been able to get those bulbs out without it.
You are the man, helped me a lot, after watch your video, I installed all led lights flawlessly!
No worries! Glad they helped!!
Awesome video man! Just did this to my 2016 4runner trail following your instructions. It was so easy and the lights look 10x better. Can't believe Toyota doesn't include these stock. Upgrading my back up lights and headlights next. Keep up the solid content!!
Thanks glad I could help!!
So I watch a lot of youtube videos and my roommate just bought a 2018 4runner and wants to change out all of the interior lights. Your video was spot on and this will make it super simple for him to install the leds. Great video but I have just one question. What 5 idiots would give this video a thumbs down? It couldn't be any clearer on how to install the leds. Some people.....
Hahaa thanks!! Who know man. People will always find something to hate.
Simple and cost effective thanks for the tips! Got mine done in 20 mins and it saved me some cash. Some folks want to charge 3 to 5 times what these bulbs cost.
Of course! DIY for the simple things is the way to go! Are the the brightest? No but are they better then stock, ohhhh yes
Great walk through! Duct tape trick was perfect! Thanks
Glad it was helpful!
I think you should try to do some reviews on the lasfit bulbs. The t10s come in many colors for $8 to $11 a set of 2. The dome lights are about the same. And they are bright as heck. See what you can do with that brand. I've got everything on my car from lasfit. No flickering and bright as always. I am certain those might flicker before too long and that gets annoying
Just bought a 17 limited and was wondering how are the bulbs holding up and have you had any go out yet. Thanks.
Thanks for the video. Installed these leds on my 2019 TRD. Great tip using the duct tape removing the map light bulbs.
I’m glad I could help!!
Just an update Jon I finally got all these installed. Love them! thanks as alway!!
Big thanks for the duct tape idea on the map lights! Was driving me crazy.
Glad it helped!
Great video - super simple and easy to follow. Thank you for listing the bulbs in the description. Any chance you have a video or are planning one for wiring installation for ditch lights/light bars?
I have those already 👍🏼👍🏼👍🏼
Thanks for the very very helpful vid. I don't know if you had an issue the bulb in the dome light but i bought the same 3022 led bulbs you used and they are just a hair to big and would not fit. They worked fine in the cargo door but there is much more room there. Otherwise the rest of the bulbs worked great. Thanks again.
It was a pain to get that dome light. I was just a tad to big but still able to seat it up there. Hasn’t come loose yet. Idk why it fits like crap when the tailgait ones fit perfectly
Let me ask you a question if you don't mind. I watched you video about the dislikes and thought you were spot on. My question is: did the plethora of owners manuals in your PRO come in a dealer's 1970's style paper envelope? I can't believe mine did. Even my 1999 cherokee has a vinyl folder for the manuals.
Hahah kinda. Old looking yes
I modified the spring side tab by flatting it out some and bending the tip back into place.
Super helpful, though with the map lights, I found it easier to install by dropping entire console from the headliner.
Glad it helped
Dude. Thank you so much for the video. It was SO helpful. Appreciate the time you put in to it.
Of course!!! Any questions just ask! 👍🏼👍🏼
do you know which fuse is for the interior lights?
I’m not sure if the fuse placement has changed from year to your. But in your manual it should have all the fuse placemeants and what amps they are
Thanks for this video! I just finished swapping all of my interior bulbs to OXILAM LEDs! I love the crisp white color and can’t wait until tonight to see them in the dark
Glad it helped!
Blue TRD Jon my only complaint (which has nothing to do with you lol) is that the dome/cargo lights (3022) don’t quite match the map/vanity (194) bulbs in color output. I had really hoped that by ordering both types from the same manufacturer that they would match perfectly. It’s not super noticeable, but if you’re looking for it you can tell, it’s basically just enough of a difference to irritate me
I've never even noticed. haha. damn.
@@kingandrewton OMG
Hey great video!!! I ordered a kit with all the interior, mirror, and backup lights on amazon for 25 or 26$. Just letting you know that they do offer full interior kits for less than 30$
Thanks!
Thanks for the video, a nice mod I will do soon. The last step was my favorite 😂
Way worth it haha
Thanks for the video. It's a challenge to video in the dark for the LED bulbs output. They seem to be a lot brighter.
Yea I don’t have a great low light camera. But you can really tell a difference. No problem!
The puddle lights in the mirror was the toughest for me, however I went in knowing the tape trick for the map lights
Doing my interior lights today Lasfit this video definitely help
I'm glad!!
How are those lights?
The map lights are designed by Mr. Toyota to be replaced from the top. The upper console pops off and the lights come out with a quarter turn housing. Check it out.
Great to know!! Thanks!
Thanks Jon for this video, sure beats the $439 Toyota charges for their interior LED kit.
Oh yes!
Love the Harbor Freight pry tools!
Best $5 ever spent
Just installed mine look great
So you have had these for 4 years. How have they held up? Any problems? Have you had to switch them? What are your thoughts after having them on for awhile?
HI Jon , great video as always. Question before I ordering those LED , when you closing the door's are the dim slowly like the original halogen one? Thank you in advance
Yes mine do still. I’m like 99% sure haha
I just installed them and yes they still do
Dude just did this to mine with the oxilam, thank you!
Heck ya no worries!!!!!
Precision is supposed to be super bright, I just but an Amazon 20$ pack in. I'd like to see a comparison video of that
This was so helpful!
Thanks for doing this video. Very helpful!
No problem! I’m glad it was helpful!
That Blue TRD The car panel removal tools you suggested made this install really easy with no damage or scratches to the panel.
Good I’m glad! Yea I’m over flat head screwdrivers messing crap up. Thank you!
very helpful, thank you.
Damn good idea taking out those map lights. Those are a pain in the ass to get to
Upper console just pops down and you replace them from the top. Mr. T designed it that way.
Thanks for the video! Perfect
22!
Where did you get that pry tool?
So I know with the old halogen bulb you want to be wearing gloves so your oils from your skip are not on the bulb. Do you know if the LED lights are the same?
Yo that duck tape trick 😍😍
Sneaky sneaky with the tape. I have more tricks than that.
Hey Jon, I need to replace my map lights. Their flickering and are annoying as all. Are you still happy with this brand? If not, what do you recommend? Thanks
Yep! Love them!!! Haven't messed up on me once!
Blue TRD Jon Question: I am looking at Amazon for the 3022 lights. Which ones do I get as it seems the packaging has changed a bit. You video shows the 31mm 5050. It seems that now they have the 5730 or the 4014. I assume that I should get the 5730?
Either should work. As long as they are the 31mm size
Thanks for the info. Big difference.
Glad it could help!
Thanks for the video it helps. Can you share what lights you run for your fog lights?
I have H11 LED Bulb in it. I’m trying to get a LASFIT bulb that is both White led and amber. It’s really cool
Hi, I wanted to install the led lights in the dome and I blew a fuse! I done know how showed i disconnect the battery?
Did you have trouble putting the new bulb in the dome light? I got the 31mm from the same brand but it's not wanting to slide in.
No I didn't. I just pushed it in. May have been a tad stiff if I remember but it secured itself
I install the lights in the lift gate without any issues today but I could not get the dome light in. I have a 2020 ORP. All three bulbs look the same but the part number on the dome light ends with a 99 and the lift gate end with a 94. I could never get the light to pop in on both ends.
I ordered the bulbs and it looks like the 194’s and 3022’s don’t exactly match. The 3022 look 5k and the 194s look 6k. Did you have the same outcome?
New Subscriber here, Ive seen dozens of these LED interior light swap/upgrades vids on TH-cam...but not one of them has included one for the glove box, can you make one
Didnt even think of that one! haha
Thanks! Great video. I noticed however that you did not swap your mirrors puddle lights for LED. I'm guessing it's not that easy to do.
I don’t have them on my 4runner
@@TRDJon 👍fair enough! 😉
Would help if Video Title or description detailed year of the 4Runner.
Duct tape for the win! Thx for the video.
Glad it helpwd
Any issues with these bulbs burning out? I've seen a few comments on Amazon about bulbs going bad after just a few weeks.
None at all. Still going great
@@TRDJon thanks and thanks for all the videos, great stuff!
Can I assume these are the same types of light for a 2020? I just bought mine 4runner through a Power of Attorney so I don’t have the vehicles manual on hand to find out what type of bulbs the 4Runner needs. Can I assume all 5th generations use the same bulb just different amounts?
Should work
This might be a dumb question, but they should fit in the 2020 models, yea?
Yes correct
TRD JON thank you my friend! Love the content!
THANK YOU!!!
Hey, about to order these for my off road. What makes the new 194 lights better? Just curious before I order. Thanks
As in the oxilam ones? They are smaller and easier to use but IMO a little brighter than these ones,
@@TRDJon yes those ones. Thanks for reply. While I have you. The lasfit h11 bulbs currently on Amazon for $35 are not the same ones you have right?
I feel they are. The box I had said LA series plus. But looked the exact same as the LA Series I added to my wife’s rav 4
I purchased these leds a year ago and now the dome and tailgate bulbs are dying. Just curious if you have had any problems or updated to another brand?
I haven’t. Only one that is out is the tag lights for the plate
Just wondering how are the interior LEDs holding up? Any issues?
Zero issues so far.
PLEASE BE CAREFUL!!!! installing it, i burned the BCM of my 4runner when accidentally touched positive with negative in the drivers curtesy light, so it looks a pretty expensive reparation and parts, sorry about my english, kind regards from chile
I guess my 2012 SR 5 didn’t come with door lights 😩 just a black dummy cover
Hey man - do you have a new link for the 3022 lights? They are like $150 now on that link you have
Nevermind. Found it!
Great video brotha! By chance, do you know what size light bulb we need for our rear license plate?
It’s a 194 as well. I’ll do a vid if you want 👍🏼
That Blue TRD Do a video of the side mirror install please!
I would but I don’t have those 😞
It’s pretty upsetting
That Blue TRD Whhhhhhattttttttt?! You don’t? I would think that you would. I have the TRD Off road version 2018 hahaha
Did you get the ones with canbus?
Just the lights
How about now after 4 y later? Do they get hot and die yet?
Nope! Honestly still going good
Thanks!
Hope it helped !!
Hi Jon, do you know if these would work for a new 2021 4Runner? Thanks!
They should yes
@@TRDJon When I'm looking for the 3022, which size do I select? Amazon has options for 31, 36 & 42mm. Thanks for all the assistance!
Any insight on this?
What year is this 4 runner you did the lights on?
2018
I think my Limited needs some LEDs!!
Any Reason Why Lights Are Flickering? I Brought Full LED Light Upgrade. They Worked Fine For A Few Months But Now They Are Flickering
Maybe a bad batch? All of them or just a few?
Well my 05 4 runner got a lil update on them Even my plate lights got it
How you liking them ?
Blue TRD Jon they are great man gives the car a huge difference got annoyed by those halogens so decided to change them
Heck ya it does. I’m glad I worked well for you
I’m about to install them on My sisters 2011 Corolla lol
Oh ya! That will be a world of difference’
Do these fit a 2020? Amazon seems to think they don't.
They should yes
What’s the toughest part of the install?
Just got my 2022 TRDPro after a 9 month wait.
I have a dealer (outta state) that is selling at MSRP!!
Hit me uo
Probably the dome lights over the center consul in the front
@@TRDJon Sorry to bug you man.
Would you happen to know if those exact bulbs are compatible w a 2022??
Dumb question I know but…
Mo license plate and mirror puddle lights?
I don’t have puddle lights. This was just the interior video
Do 4 runners not have footwell lights?
They don't. At least not bright enough that I have ever noticed..
Will this fit a 2021 4Runner?
yep
Would this work for a 2021 T4R
Yes
Will these lights work on a 06 4Runner?
They will. You just have to make sure that you select the proper bulb type
These bulbs are trash. They will constantly burn out on you. Although the seller will send you a new set under warranty its not worth the headache. Dome tailgat3 and license plate bulbs kept burning out on me. I suggest getting better quality bulbs. Just my .02$
I’ve had mine in basically since this video and they haven’t burnt out
Maybe just a bad batch?
What about license plate lights? And the ones in the bottom of the side mirrors. I have a 2020 TRD Off Road Premium
I’ve done a vid for the plate lights. Mine doesn’t have the mirror lights
Will these fit a 2020 4Runner?
Should. Nothing has changed to my knowledge.
Blue TRD Jon Thanks for the quick reply. I appreciate the info and videos you share with us. Thanks again.
Check Amazon, you can get interior lights (LED) and it includes all of the interior, Mirrors, backup, and license plate. You can also filter by what fits your vehicle.