Config Hikvision Camera for use on a Dahua NVR
ฝัง
- เผยแพร่เมื่อ 22 มิ.ย. 2019
- If you have enjoyed this video please consider a donation.
Donations can be made at link below.
www.paypal.com/cgi-bin/webscr...
Step by step video on how to add Hikvision Camera to a Dahua NVR
Brought to you by:
g-gelectronics.ddns.net
www.dahuasecurity.com/support...
If your Dahua is private labeled by say, ADT or others this firmware will get rid of the private labeling and divert your NVR to a Dahua branded NVR
![[TH] VCT Pacific Stage 2 - Playoffs Lower Bracket Final // PRX vs DRX](http://i.ytimg.com/vi/5HwO1bQyAx4/mqdefault.jpg)
You have just saved me from my misery. Now I can change all my cameras to the Dahua NVR. I have never known about the SADP. good tool. Thx.
Thankyou… i have so confuse to setting my cam, but this video solve my problem. God bless you.
Nice share video guys!! Thnx
I ran into this: I configured the Dahua NVR via a HDMI cable. Connected and configured all ip cams in the NVR, even the Hikvision camera was found using this instruction video ;).
But, when I moved both NVR and cams to their final operation location and reconnected all cam's to the NVR (POE) I was not able to get the Hikvision cam to work. I took me a while but I found that:
Whenever the HikVision camera has lost power for a while, the Dahua nvr cannot connect using the HikVision defined ONVIF user. Removing the user on the HikVirison camera and recreate it (or another account) fixes the issue.
Still, compatibility between these brands is not that great.
Dahua Technology NVR4104-P-4KS2 + HikVISION DS-2CD2185FWD-I(S)
Thanks for this video!
Just a friendly pronunciation correction - Dahua is pronounced Dah-wa.
thanks for the video! does motion detection work if setup on Hikvision camera?
you can use this sadp tool when replacing a dahua camera with a new one and need to configure passwords as well
thank you solve my problem!!!!!!
thx alot it wrked
Hello
I have a Dahua POE NVR, I am connecting it it a HIKVISION POE camera. The NVR is failing to power it up. If I connect the power plug to the camera, than it will work. Do you know why the NVR is not powering up the camera?
hi such a nice video but i m bit confused the IP and GATE WAY is so opposite can u plz explain
great, thanks
So Dahua says I need to go into the camera via IP address and change some settings( Enable Hikvision-cvi, Set, "Hikvision-CGI Authentication" to, "digest/basic", Set, "RTSP Authentication" and "WEB Authentication" to, "digest/basic"). Why were you able to connect the camera without doing these?
Because Dahua is instructing you to settings so that they can look at your cameras and hack into your home network to see what you are up too and steal what they can from you?
Hello sir , need a help on how to add more then 5 IP hikvision on a dahua xdv / DVR analog
Your gateway and cam ip is different so is it possible to see csmera online in any device
Has any one figured out how to use a hikvision camera (2cd2622) analytics (line crossing) on a dahua nvr (Nvr4116)
This procedure only for Hikvision Configuration or it's for all cameras, what I meant is shall we use SADP for ALL TYPES of cameras for the configurations?
no. only for Hikvision and Hiwatch
nice
How to connect Hikvision IP camera to dahua dvr
I do all thing and show this massage The login time is up
Can you help me
Login time is up means you’re almost there...the nvr is looking for your password for your camera. Go the the camera screen in the nvr, click on the edit icon for that camera and enter the proper password. Give it a few seconds it will go green. If you see locked out, it will take a minute or two. After a few minutes if you still see locked out, reboot the camera
How do you get the camera off online to even use the sadp tool
I disconnect camera from NVR and use a POE switch
@@DIYELEKTRONICKITS thanks i ended up just using a 12 volt dc adaptor directly to camera for power worked just fine thanks for the reply
Must rename video regarding its an IP CAMERA!!!
From IP camera to analog DVR
why do you put that IP? 10.1.1.65
It's what Dahua uses on its internal network of the NVR...it uses 10.1.1.65 / 66 / 67 / 68 ect....
Jose luis Castro Querevalu
Having installed hundreds of Dahua and FLIR nvrs here’s what I know...if you’re plugging in directly into the nvr Poe port make the camera dhcp, allowing the nvr to assign the IP address. If you’re using a Poe switch connected to your router, set the camera for static. We pick a range and build from there. Also. We found it helpful to sharpie on the bottom of the camera to mark it with a s for static and the last digits of the ip, ie: .130 for example
The only thing we continue to have problems with is a Dahua camera to a FLIR recorder and the time stamp within the camera. Some wander and we can’t figure out why. So if anyone knows please do tell
Kenny Klanga
Hello
I have a Dahua POE NVR, I am connecting it it a HIKVISION POE camera. The NVR is failing to power it up. If I connect the power plug to the camera, than it will work. Do you know why the NVR is not powering up the camera?
@@nazihandary5909 Hello
Are you using a factory cat5 or did you crimp it? When connecting any camera other than a Dahua to the PoE ports, make sure the camera is configured DHCP. Start with that and LMK
Complete video about how to connect Hikvision IP camera to dahua NVR
th-cam.com/video/LxARuFvAJu8/w-d-xo.html
How to connect Hikvision IP camera to dahua dvr