Hello, great video! We have a chrysler car workshop and my brother offered me a programmer job there. So how do I start learning how to use the witech program?
Hi, is that possible to re config in the BCM the park lights of a Jeep Cherokee KL that has the park lights as a German standard (one side or the other with the turn lights commutator) to change that both sides light att the same time? Thank you.
do you have a FCA video on the importance of VSRs and where to find the documentation on which claims - LOPs will need A vehicle Scan Report Would be real usefull. Thanks
Hey, great video! One question regarding light settings with WiTech. Is it possible to change it with this program? For instance DRL on in combination with the low beams?
Hy, i have a question. Just purchased a durango and added a trailer hitch to it, come to find out a dealer has to activate the electrical part of it. Not paying a dealer one hour labor for that job, so i went and got me a micropod2. I find the ecu configuration and see all values but how can i change them?? Thank you
Your clone chinese micropod will do you no good. You must call the dealer and ask them to add that option to your VIN, then use a active micropod logged into a active witech account and perform a configuration resrore on the module. Then it will function.
Banana nut bread has nuts..... sorry thought we were bringing up stuff that has no relation to the video... my bad. Yes it does configurations, its the OEM tool.
If I'm using a CarDaq that's already approved by witech 2.0 for aftermarket will the online witech work? Or is the online witech strictly only for the micropod? Need to work on 2018+ vehicles that have the SGM. Thanks
In order to access bidirectional control or any function other than reading codes on a 2018+ SGM with witech will require an additional techauthority subscription.
I just sent the approval to Chrysler today for my cardaq now waiting for the 2 days to get approved. Have you used your cardaq to flash anything on witech 2.0 if so how is it working
Yes, it is the most current tool used in the dealer, it covers 2010ish up to current. There is a chart on the Chrysler site showing which tool, covers which models.
Can you please advise me if this tool is good to buy it Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.17 With DELL D630 or Lenovo T420 I found it on line
So you think it wont work I'm having the code p167a mismatch and I want to buy the tool to reflash the transmission or update the software if it needs it. I work on cars but I'm not a professional I have learn a lot from a lot of mechanics here in TH-cam thanks for your time and help bro
Great video. I'm a new technician at a Chrysler dodge jeep ram dealership so still learning the witech system. Good reference if I need it
Great video keep them coming
Awesome presentation I'm working also here in the dealer using the same device.thanks for sharing.
Great video Keith, thanks for sharing 👍
Awesome video Keith!
Thank you very much! This means a lot coming from you!
Hello, great video! We have a chrysler car workshop and my brother offered me a programmer job there. So how do I start learning how to use the witech program?
Can you use a apple tab to run witech 2.0 with the micro pod?
really good video, i changed abs module on 2010 wrangler, could i reflash pcm to vin match with micropod or must be with j2534 passthrough?
Hi, is that possible to re config in the BCM the park lights of a Jeep Cherokee KL that has the park lights as a German standard (one side or the other with the turn lights commutator) to change that both sides light att the same time? Thank you.
Question, under a bcm report do you know what sw-year and hw-year mean?
where can i buy this. the lings dont have the one on the video
Will this work on a 2000 ram 1500 5.9 magnum to fuel sync ty
Can you advise me, can I make ecu ignore some sensors using witech? I need to prepare vehicle for expedition and need reliability, thanks.
do you have a FCA video on the importance of VSRs and where to find the documentation on which claims - LOPs will need A vehicle Scan Report Would be real usefull.
Thanks
Hey, great video! One question regarding light settings with WiTech. Is it possible to change it with this program? For instance DRL on in combination with the low beams?
No.
I am getting wytec really soon here so on the new 2.0 I can use my tablet wireless???
Yes
Hy, i have a question. Just purchased a durango and added a trailer hitch to it, come to find out a dealer has to activate the electrical part of it. Not paying a dealer one hour labor for that job, so i went and got me a micropod2. I find the ecu configuration and see all values but how can i change them?? Thank you
Your clone chinese micropod will do you no good. You must call the dealer and ask them to add that option to your VIN, then use a active micropod logged into a active witech account and perform a configuration resrore on the module. Then it will function.
Thank you!
PCM vin can change easily with any tool can i change ABS vin ?? And also there is configuration differences code in ABS can i also do configuration??
Banana nut bread has nuts..... sorry thought we were bringing up stuff that has no relation to the video... my bad. Yes it does configurations, its the OEM tool.
If I'm using a CarDaq that's already approved by witech 2.0 for aftermarket will the online witech work? Or is the online witech strictly only for the micropod? Need to work on 2018+ vehicles that have the SGM. Thanks
Yes it will work for online WiTECH2 J2534
To piggyback on this comment, with witech can you gain bidirectional controls without removing the SGM?
In order to access bidirectional control or any function other than reading codes on a 2018+ SGM with witech will require an additional techauthority subscription.
Shoot that beats the heck out of searching and removing those goofy things! Thank you for your response and taking the time to put out these videos! 👍
I just sent the approval to Chrysler today for my cardaq now waiting for the 2 days to get approved. Have you used your cardaq to flash anything on witech 2.0 if so how is it working
Can a used skreem module be used on a 2006 Jeep Grand Cherokee Limited??
No.
Does willtech 2 will work on Jeep Grand Cherokee 3.6 2018?
Yes, it is the factory tool for ALL 2008 and up FCA products.
Is it possible to change configuration? For example delete rear O2 sensors?
No. That is tuning software. This is diagnostic software.
@@96LS1S10 Which tuning software can do that?
can i do proxy aligment for jeep cherokee kl 2018 ?
Yep.
Does the wiTech work on 2016 cars ?
Yes, it is the most current tool used in the dealer, it covers 2010ish up to current. There is a chart on the Chrysler site showing which tool, covers which models.
Witech is used in cars 2006-current. SOME 2005's.
Does the pasthru devices support this sw?
Yes, this software does support many different pass thru devices. But not all.
@@L1Training does the vax nano gm can be used as passthro device for reflash
Hey my please tell me if I canor where I can buy this tool
submgr.am.fcawitech.com/login.htm
Can you please advise me if this tool is good to buy it Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.17 With DELL D630 or Lenovo T420
I found it on line
If you are not buying from the OEM it is pirated or hacked software.
So you think it wont work I'm having the code p167a mismatch and I want to buy the tool to reflash the transmission or update the software if it needs it. I work on cars but I'm not a professional I have learn a lot from a lot of mechanics here in TH-cam thanks for your time and help bro
How much is the tool or how much did you pay for it?