2008 Chevy Impala SS Oil Pressure Sensor Replacement
ฝัง
- เผยแพร่เมื่อ 24 ก.ย. 2022
- Hi guys, in this video I'll be explaining how to replace your Oil Pressure Sensor in your 2008 Chevy Impala SS. This one is very simple. All you need is a Flat head screwdriver, a ratchet and a 27" socket to have the job completed in under 5 minutes. Please like, subscribe and comment to help me continue making videos!!
- ยานยนต์และพาหนะ
Thanks for this video! I have the same car. Just saved me $200
No problem... always trying to help! :)
Thank do u have a video of evap solenoid
Hi, I think this is one of the better videos of there of what you're looking for. Hope this helps. Let me know if you have any other questions. Thanks
th-cam.com/video/3fA7nCPN2Jk/w-d-xo.htmlsi=i_O2uOwWm6ImxEl9
Good morning...I have the same car.... did you change the oil pressure filter? I can not find any info on how or where to change that.
www.ebay.com/itm/225665347291?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1gSWAZVpVQHOqYr08PPa3Bg35&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=225665347291&targetid=1644837436003&device=m&mktype=pla&googleloc=9025123&poi=&campaignid=20125739985&mkgroupid=149128855676&rlsatarget=pla-1644837436003&abcId=9312975&merchantid=6296724&gclid=CjwKCAiAjfyqBhAsEiwA-UdzJDu3bOVmXUQ1-LKaqT64VukXqKL6OOQkMRrzwe9w7kVfRmpI1azUhxoCmZYQAvD_BwE
Hey, I'm not sure on that one. I never changed that before on this vehicle but here's what I found. (Above link)
Okay so I just have my son help me put in the oil pressure sensor and the oil pressure filter is down in the tube underneath the sensor. You have to use a pair of needle nose pliers to pull it out and when I bought my sensor I had the option of buying a set that included the filter. Thank you for your tutorial. It helped out tremendously and gave me the encouragement of doing this myself. Of course I needed my son's help because my gripping strength in my hands is not so strong anymore. But I'm going to test out my SS as soon as I log off of work
@user-nl4bk8to1e ok please let me know if it works. It sounds like you have it under control. Hope it works out. I may need it at some point as well if i don't sell it first lol 😆
I've been driving it out and about for the last 3 hours on and off to run errands and no notifications. So so far so good. Thank you again!
Is this part another name for oil pressure pin?
No, that's a different part.
I changed oil and the oil pressure sensor and still says oil pressure low what you think it can be the problem
Do you get a diagnostic code?
I have a 2007 LT 3.5L and it's displaying engine power reduced then turning off then it will say traction control off and it goes into limp mode i have replaced so much and so many wires I'm almost ready to junk it man idk what else to do it only has codes for maf sensor replaced it still has code an fuel EVAP selenode and that shouldn't have to do with the traction control off issue rite?
That's a power issue. Have you checked the battery or the alternator... maybe the starter or all your fuses. Seems like something may not be functioning at the right voltage in my opinion.
You need a DOD delete done to your cars computer
Why didn’t u change the filter 🤦🏽♂️
Because I didn't need to 🤷♂️
My SS got oil splashing on belt
Do you see where the oil is coming from?