A few more things i didnt see you mention is that they are waterproof, if you get the drill/impact combo it will not include the small "pencil" box, on the large tool box , one w/ the black carring handle, the handle has a safety that will lock the cover, also you cut a 5/8 plywood to divide it in half
I can tell you really didn't plan this video out. Pretty disorganized but the review was solid. Thanks for taking the time to review the Packout system.
Great presentation, thank you for posting it! If I may add a few pros and cons you didn't address in your otherwise outstanding video. In no particular order: I bought the Packout System to use as my range caddy for shooting sports. Because I will often be pulling my gear over soft gravel and sand, one priority for me was wide diameter wheels. This offers less rolling resistance through soft material (it also provides better leverage when traversing stairs.) The Packout Rolling Toolbox has the "tallest" diameter wheel I could find and seems to have the best mobility in these situations. A significant con of the Rolling Toolbox: The handle does not retract fully into the box (like your carry-on luggage does ) and this makes the box too bulky to fit into sedan trunks. P/U and SUV owners can disregard but if you’re a car owner, you'll have to store this in the back seat when traveling. I use a lot of paper media (targets, range cards, notebooks) and this was the only system I could find that offered total water resistance. I was using Husky before and it did not have a good seal and dampness would ruin my paper medium if kept in the box for extended periods. Con: Price. Other than some of the “mil-spec” stuff that’s out there, this is the most expensive system on the market. If you're buying three or more Packout components, you're going to be looking at $300. Husky runs 60% less for a system of similar storage capacity. Conversely, the customization of this system is superb and I feel you make up value there. Finally, look to Home Depot or Lowes before making your purchase online. I'm a huge Amazon Prime user and this is one of those extremely rare products that was much less expensive to purchase at my local "brick-and-mortar" store. Stay Safe & Stay Strong, Boston
You know, I too was turned off by the price in the past. Over the past two years I have casually looked at them in the stores and on videos. I have been using Ridgid's boxes and really like them. But, I finally decided to take a dip into the Packout pool. I picked up the smallest of the tool boxes, Model# 48-22-8424. Not cheap in price by any means at almost $80.00. I stopped at the local Home Depot on my way to work and didn't really get a chance to check it out until I got home that evening. It's funny how much different it was once I got it home and was able to see and compare it next to my Ridgid 22" box. You really can't compare the two, the Packout box is just so much better built. Yeah I paid over twice the price, but the Packout box is about twice a heavy and part of a system that is more customizable. Now I know this sounds like I am bashing Ridgid, but I am really just trying to make a point about the price, because I was actually thinking about returning the Packout box. Not because it is bad in any way, but because it doesn't really fit my tool needs. I'm not in the trades, I every now and then will do an odd job for someone. The Packout box is so much heavier than my Ridgid box, I wouldn't want to fill it with tools because of the weight. My Ridgid boxes have been holding up fine for the past three to four years, and they look to keep on going good. The only thing I don't like about Ridgid is that you don't have drawers. When I bought the Packout 22" box I also planned on and still plan on getting the Packout drawers, and a dolly that Milwaukee sells, not the Packout cart or dolly. There is a pretty good Milwaukee 4-wheel convertible dolly that I like that I want to use with a Packout 22" XL tool box, one or both of the Packout drawers, and another small 22" tool box, I found a use for the one I purchased. I have a 25 year old Milwaukee hammer drill that needed a new home, so I am now going to store it in there, plus it has room for other accessories I have and use with the drill. So I am still going to use my Ridgid set, but I do have some future plans for a Milwaukee setup. I can talk myself into spending money on things I want, not necessarily for things I need.
My wife bought me this system yesterday for my birthday. I opted for the bottom and two of the larger boxes. Thanks for ideas as to how to utilize it. I am a handyman and this will fit my needs perfectly. Anyone interested in these sets should look at Northern Tool. They have a great sale on then right now.
FYI: Milwaukee's nomenclature for the 'small attachments' on the PACKOUT™ system is 'Cleats'. It will be interesting to see how durable these 'cleats' are after months and years of being dragged, dropped, and sitting on jobsites and inside vehicles....and if they'll still snap together correctly as they wear.
I agree. They are pretty durable and there is a lot of plastic there. Only time will tell though. There is no such thing as bad plastic, just bad applications of it.
Buddy, I love your honesty and sincerity! Great set up, I'm taking a few notes from your well of knowledge. Thanks bud Be good Stay well All the best to you and family! Take care
Yeah I loaded up on the system this season, also check out Milwaukees non packout box that's like the mid size parts holder, it is NOT a packout but at $19 you can use it as a tool carrier etc... Take a multi-tool and remove the hard partitions as needed...I also saw someone selling a conversion kit to make it a packout, but it was expensive, I am thinking just cut some blocks like the bottom of a packout and screw them on..good review thanks, hoping to see some mods
Hey brother I love your setup I just ordered the same exact one. I’m an electrician and this will definitely come in handy for all my roughs and trims.
Looking at buying a packout very soon. Great video. When I'm having a day when I get tongue tied a lot, I say "First day with my new tongue." Also surprised nobody commented on the finger bang comment. 😂
I just got this. Been wanting it since milwaukee came out with it a few years ago. It was never for sale anywhere and about 7 months ago ended up buying the dewalt tough system. Bad Idea. I do comercial furniture installation and handyman work in comercial buildings. The tough system couldnt hold up to riding in a covered box van and rolling around on carpeted floors in office buildings. A wheel fell off the first day i used it. The pins in the hinges always needed pushed back in. The latches have tiny screws and cheap washers that are hidden unless you flip it over that are screwed into to the plastic that constantly fall out causing the entire latch to fall off. The clips that hold the smaller boxes to the lid constantly fall off. The entire back of the box has a giant crack down it. So i finally scored a packout. I am very happy. And anyone trying to decide between the two i can guarantee you will be unhappy with the tough system after a few months unless you do very light duty work.
Nice video. I have also organized my boxes for certain tasks. I have a box for working on flooring, another for doing millwork, another for drills and screws. It has worked really well.
3D print - you can make any partitions or sections of the insert containers you need. There is also models for duel level containers (ie: nuts below and the bolts on top of the trays)
This stuff is awesome! I've been looking in to options for my electrical stuff. Every time I have a project I go to the garage, gather all the tools individually and go to the project. Would be way nicer to grab a box of related items and go
You sold me. I'd been looking, but you helped me make up my mind, and this is what I want. Also, "fingerbang"? Damn, son. I'm an old lady. I almost clutched my pearls just then.
Hey mate, thank you for doing this review. I bought a packout system a few weeks ago and now was looking to buy the clear top organisers when I found your video. Just a heads-up for yourself or other people is that you can get 2,3,4 and 5-way dividers for them that folk have 3d printed and are also selling on Ebay I'm now just working out how to organise my impact sockets and bits. Hmmm...
Min 15.24. It is not a design flaw. Its correctly done. You cannot unlatch when attached together, but just unattaching and moving the upper box, then you will be able to latch the underbox. You don’t need to split everything apart.
Nice video. I hate watching It for this reason, I've got the Bosch Boxx system with roller, and I purchased 9 Milwaukee Fuel Stackables which I've adapted to the roller from a local lady. Now I want this shit. You're costing me a fortune 🤪👈
Jeez-a-lou!!! I'm still working out of Plano 20" tool boxes that I bought on sale for $1.99 after mail in rebate at Menards about 20 years ago. Disclaimer: I'm not a professional, just a handy finger-banger. Nice tool stack, but now I know why professional carpenters used to make their own custom wooden toolboxes...think I'll do the same.
@@TheDurbinCompound I can see that they're extremely nice and organized and for a professional, well worth it. I'm a bit of a low-bucker, and have scored several barely used Milwaukee corded tools from the late 90's on the cheap and I'm looking to organize them in my garage using large tool boxes so I can also easily take them with in my truck when I've got a project. After looking at what's available I'm beginning to think that building something with 1/2" plywood is the best solution for me. I've gotten a lot of mileage out of the Plano boxes and they've held up well. I'll continue using them for plumbing, electrical, and my measuring tools. I've even got 2 under the back seat of my 2006 GMC K1500 Ext. cab as they fit perfectly. One has mechanic's tools and the other is a general tool box with a cheap, cordless drill as the only power tool. You wouldn't believe what I've been able to to with just the hand tools in that little box.
@@letsgonow5641 There are a lot of less expensive options available that may also fit your needs better. Personally, I have a large Plano tackle box that's roughly 25 years old and for going in the boat a double layer Plano storage box holds more than I'll ever need. I use 3 rods with my 3 favorite lures that I use 85% of the time and I only lose a lure every few years. I'm still mourning the loss of the large jointed Rapala minnow that I had since the mid 80's that I lost 2 summers ago. I noticed that my line was nicked but I was hitting a particularly good spot on my drift so I decided to take a few more casts before cutting out the bad line and re-tying my leader (STUPID) when a large Musky hit and broke my line right where it was nicked. It was a particular favorite of mine and I had taken many fish with it over the years...RIP. I only have to go into the storage box a few times/year in the boat and almost never into the tackle box. As with most things, less is more and clearly even I'm over equipped.
You can take your dividers and make a slit half way in between so they interlock and have them make a cross. one needs to be slit half way up in the middle and the other half way down in the middle.
Nice video. I went with Ridgid Pro System, but hope to buy one Packout stack too to compare and contrast. I would like to attempt an adapter (3D printing) so a stack could be mixed and matched between the 2. Colors would clash, but would be cool as Packout is expensive, Ridgid is cheaper, yet don't have some of the cool containers Packout has..... Someone on a budget could buy the Ridgid main system and some of the extra containers Packout.
Just watched it, regarding the 4 slots in those square boxes at the beginning of the video ... I can't think of anything small right now that you would put in such a small square box when you're in construction ... So I guess the reason why you have 4 slots inside those square boxes is just to have a longer lifespan. So if a slot breaks for any reason, you can just flip that divider and continue to use it ... Just my thoughts. Good video though.
Yes! I assume someone had some foresight on those dividers. I made another video on how I notched the dividers to fit together and make them in 4 spots. I use one for wire connectors, small wire nuts, and wegos.
Right out the gate I went to switch the compartments around and was like huh!? Won’t close? Then I realized damn I can’t move them. I might see if I can notch one of the 4 pcs I have maybe throw some rubber adhesive on it the semi seal it. Iduno just throwing ideas around. How much weight do you feel the whole setup can take? I have mine stack up... rolling/large/4medium/large low pro/2x half low pro/cooler. I never put the friggin $70 cooler on top really though, prob should of bought the regular cooler for $39 instead. 🤦🏽♂️ at times I feel like the handle is going to break especially rolling around a fresh construction site and/or up down stairs. I’ll be very tight if it broke! Nice rundown vid.
I finally pulled the trigger and got the system. Only problem is the large box is real hard to separate from the rolling box. I know you said they’re stiff at first but I’ve gotta tug on it pretty hard to get it off. Is that normal and it just loosens up over time?
Nice video man 🤝 information goes a long way! I’ve gain a lot of Milwaukee tools this past month myself, I seen in the first box you had a Milwaukee circular saw? How is it holding for you since you’ve own it? Battery or corded? Thanks 👍
Battery powered circ, non fuel. It does ok. It’s definitely not a corded model but it is nice for little stuff. If you’re doing a big project than it’s definitely not the tool to use.
Nice video!! Can you keep going up with it after that last half box? Like if you had another half box beside it, could you keep building up with other pack outs containers?
what is your opinion on the locking mechanisms for each unit? I bought the Husky version of this and the plastic locks on the bottom/side of each piece worn out fairly quick, and MORE IMPORTANTLY when the unit stacked/locked unit would ride in the bed of my truck on its back (where it probably spends most of its time) it wold put a lot of force on these locks. If I buy the Milwaukee unit do you believe each piece will remain locked?
Shit I didn’t even set the large organizer up yet!? That would be dope if it does that! I’m gunna check when I get to the crib. You know my low pro organizers (all of them) lock it fine but are not as tight as the other boxes. They kinda have some play in them. 🤔 I’m trying to figure the best way to line up my 15g/18g w/ 2 batteries. They fit just not amazing. If you fiddle you can get the latch to close while stacked. I do that all the time unintentionally 😆
Cool review. That 3 piece goes for like $200 now ... you got that and then added the organizer? Kind of what I've thinking ... "ToolManJoe" tricks his set up out with Kaizen foam ... thoughts?
Exactly what I did. The 3 stack is definitely worth it. I really like the Kaizen foam but I feel that it wastes a lot of space. I come from an aviation background where “all tools accounted for” is essential. Foam is great for that purpose but you lose a ton of space for other tools.
@@TheDurbinCompound the smallest of the three modules ... like $60? How many of those could the rack accommodate while using or not using the mid sized module if you follow? yeah, I see pros /cons on the foam ... thx.
I think its due to if its at your Home Depot, you will check it out and snap the boxes together and open close each one (which both makes a satisfying snap sound) over and over. Thus you will finger bang them some whether you decide to buy or not.
Hey! If I have one packout mounting plate secured to a wood garage platform is it fairly secure if every box has a mini padlock on it? We have a common shared garage area shared with a few neighbors. There's a webcam on it just worried about the quick getaway from an unidentified workman or something.
Can you fit 1 box of screws or 1 lbs of screws in one of the slim containers? I'm debating getting the bigger organizer but if 1 box of screws will fin in the slim I might just go that route.
It’s hard to get them to fit a 1lb box. I have gotten close but not the whole box. I lay them flat in the same direction. Below is a link to another video I did when I show how I organized my screws! th-cam.com/video/0w0z16FV1XE/w-d-xo.html
Thanks for sharing. If you cut halfway through the middle of two of the dividers, you should be able to split a compartment into 4 without using glue. Just a tho't: I have not done this. FYI..I do have one of the thicker organizers and the boxes do not mount on the top. They will not even sit level on the top for the most part. Great idea, though. It'd be real slick, even if it cost 10-15% of the usable storage space. Rgds.
Outstanding! Thanks for letting us know that they won’t click in! I’ll probably do a video this week about making organizers and how to! Stay tuned for that! Appreciate the comment Terry
I love my PACKOUT systems, have both the red and black, the black PACKOUT holds my M18 and M12 tools, batteries, bits and blades while my red PACKOUT holds the hardwares, hand tools, electronics, and other miscellaneous items.
I had the same issue finding both systems locally because it was sold out or not readily available, the black system isn’t available here in the U.S. so I ended up getting both the black and red PACKOUT systems online. I did get the black PACKOUT from Italy via eBay.
In addition to your Jan 24th video for modifying the Packout bins to quads (th-cam.com/video/rhHlL-pwBHA/w-d-xo.html), it looks like some people are 3D printing their own bins in a variety of configurations ... 3, 6, even unequal quad partitions (th-cam.com/video/Kr_q6rWOKHY/w-d-xo.html). The notion that you might even color code the bins (outside of the Milwaukee red) is kind of interesting.
What is the height of the 3 primary Packout boxes when stacked with the handle down? I'm trying to figure out if they'll fit below my workbench before I order them. Thanks for the review!
The first one is 1 ton. The second 0,8 ton and the 3rd 0.5 ton. 😁 They are as heavy as they are sturdy. No magical materials. First class. The wheels do all the task. Do not attempt to use the second one alone full of stuff. Or buy a replacement shoulder.
@@TheDurbinCompound thanks man one more question. how well do you think the big box with wheels would hold up to a 300 lb guy sitting on it? Job sites tend not to be too accommodating at break time. :) Also, I have the rigid set and it sucks trying to roll it over extension cords. I think wheel size is a factor. The rigid has much smaller wheels than the milwaukee. Do the milwaukee wheels get it over extension cords easy?
The box could hold a lot of weight. I’d put 1000 pounds on it. It would be fine. The wheels don’t really have a lot of ground contact when it’s sitting up. So it’s not a factor. Yes the cords are not an issue. I’ve never had an issue with thresholds or stuff on the floor
You will probably find this video helpful. Easy answer is that it is ok but a lot of guys are pinning their handles so they don’t come off. th-cam.com/video/vm6pSU7Btrw/w-d-xo.html
Don't like the fact that they always lock, unlike the DeWalt and Ridgid you can stack them without locking them, when your on the jobsite sometimes you just grab them and go without having to unlock them, plus when it rains those good get filled with water and grime and you to flip them over just to get the water and crap out
The modular system is awesome, but the no slide - out / drawer option IS a deal breaker for me. Ridiculous to have to unload this whole thing to get to the bottom if you have a full stack
A few more things i didnt see you mention is that they are waterproof, if you get the drill/impact combo it will not include the small "pencil" box, on the large tool box , one w/ the black carring handle, the handle has a safety that will lock the cover, also you cut a 5/8 plywood to divide it in half
Awesome! Thanks for adding some details I missed! Pinned to the top!!
Also for the rolling box combo kit the tray won’t come with it
I can tell you really didn't plan this video out. Pretty disorganized but the review was solid. Thanks for taking the time to review the Packout system.
You got me. Always watching videos after I bought the thing. Watching reviews to justify my purchase
Takes one to know one!
finger bang ? i was watching this video with folks. i thought i was safe here lol
Almost pissed myself after that comment!!! LMAO
Oh I was laughing my ass off. I had to back it up to make sure I heard correctly. Good stuff.
Thank you for this excellent hands on review 👍
Well I appreciate your comment!
Great presentation, thank you for posting it! If I may add a few pros and cons you didn't address in your otherwise outstanding video.
In no particular order: I bought the Packout System to use as my range caddy for shooting sports. Because I will often be pulling my gear over soft gravel and sand, one priority for me was wide diameter wheels. This offers less rolling resistance through soft material (it also provides better leverage when traversing stairs.) The Packout Rolling Toolbox has the "tallest" diameter wheel I could find and seems to have the best mobility in these situations. A significant con of the Rolling Toolbox: The handle does not retract fully into the box (like your carry-on luggage does ) and this makes the box too bulky to fit into sedan trunks. P/U and SUV owners can disregard but if you’re a car owner, you'll have to store this in the back seat when traveling.
I use a lot of paper media (targets, range cards, notebooks) and this was the only system I could find that offered total water resistance. I was using Husky before and it did not have a good seal and dampness would ruin my paper medium if kept in the box for extended periods.
Con: Price. Other than some of the “mil-spec” stuff that’s out there, this is the most expensive system on the market. If you're buying three or more Packout components, you're going to be looking at $300. Husky runs 60% less for a system of similar storage capacity. Conversely, the customization of this system is superb and I feel you make up value there.
Finally, look to Home Depot or Lowes before making your purchase online. I'm a huge Amazon Prime user and this is one of those extremely rare products that was much less expensive to purchase at my local "brick-and-mortar" store.
Stay Safe & Stay Strong,
Boston
Awesome! I didn’t even consider using it for a range box! That’s a great idea! Thanks for the well thought out comment!
You know, I too was turned off by the price in the past. Over the past two years I have casually looked at them in the stores and on videos. I have been using Ridgid's boxes and really like them. But, I finally decided to take a dip into the Packout pool. I picked up the smallest of the tool boxes, Model# 48-22-8424. Not cheap in price by any means at almost $80.00. I stopped at the local Home Depot on my way to work and didn't really get a chance to check it out until I got home that evening. It's funny how much different it was once I got it home and was able to see and compare it next to my Ridgid 22" box. You really can't compare the two, the Packout box is just so much better built. Yeah I paid over twice the price, but the Packout box is about twice a heavy and part of a system that is more customizable. Now I know this sounds like I am bashing Ridgid, but I am really just trying to make a point about the price, because I was actually thinking about returning the Packout box. Not because it is bad in any way, but because it doesn't really fit my tool needs. I'm not in the trades, I every now and then will do an odd job for someone.
The Packout box is so much heavier than my Ridgid box, I wouldn't want to fill it with tools because of the weight. My Ridgid boxes have been holding up fine for the past three to four years, and they look to keep on going good. The only thing I don't like about Ridgid is that you don't have drawers. When I bought the Packout 22" box I also planned on and still plan on getting the Packout drawers, and a dolly that Milwaukee sells, not the Packout cart or dolly. There is a pretty good Milwaukee 4-wheel convertible dolly that I like that I want to use with a Packout 22" XL tool box, one or both of the Packout drawers, and another small 22" tool box, I found a use for the one I purchased. I have a 25 year old Milwaukee hammer drill that needed a new home, so I am now going to store it in there, plus it has room for other accessories I have and use with the drill.
So I am still going to use my Ridgid set, but I do have some future plans for a Milwaukee setup. I can talk myself into spending money on things I want, not necessarily for things I need.
Producing a like from everyone might be impossible but you got a like from me. Milwaukee is the big dog right now when it comes to power
My wife bought me this system yesterday for my birthday. I opted for the bottom and two of the larger boxes. Thanks for ideas as to how to utilize it. I am a handyman and this will fit my needs perfectly. Anyone interested in these sets should look at Northern Tool. They have a great sale on then right now.
Great run down of each pack out
It was awesome to see how you organize and use your system
Gave me a few ideas
Thanks 🙏
FYI: Milwaukee's nomenclature for the 'small attachments' on the PACKOUT™ system is 'Cleats'.
It will be interesting to see how durable these 'cleats' are after months and years of being dragged, dropped, and sitting on jobsites and inside vehicles....and if they'll still snap together correctly as they wear.
I agree. They are pretty durable and there is a lot of plastic there. Only time will tell though. There is no such thing as bad plastic, just bad applications of it.
Buddy, I love your honesty and sincerity!
Great set up, I'm taking a few notes from your well of knowledge.
Thanks bud
Be good
Stay well
All the best to you and family!
Take care
Appreciate your comment! Hope to see you around the channel
Enjoyed your video...best review of these. I am buying them because of your review. Thanks!!
Fantastic review, has helped me decide I'm definitely buying the set. Even if it is 340 euro in Ireland!
Yeah I loaded up on the system this season, also check out Milwaukees non packout box that's like the mid size parts holder, it is NOT a packout but at $19 you can use it as a tool carrier etc... Take a multi-tool and remove the hard partitions as needed...I also saw someone selling a conversion kit to make it a packout, but it was expensive, I am thinking just cut some blocks like the bottom of a packout and screw them on..good review thanks, hoping to see some mods
I have seen that parts holder. I was going to buy one to organize tile spacers and smaller tools. Might see that in the future
Hey brother I love your setup I just ordered the same exact one. I’m an electrician and this will definitely come in handy for all my roughs and trims.
Absolutely! We have gone all out with packout at this point! I might do an update video.
Looking at buying a packout very soon. Great video. When I'm having a day when I get tongue tied a lot, I say "First day with my new tongue." Also surprised nobody commented on the finger bang comment. 😂
There have been TONS of comments about the finger bang comment
Thanks! This video is exactly what I was looking for. Now I know which combination I need.
Sr. I just receive my Milwaukee pack out 07/10/2019; and you Sr. give me a tons of ideas in how organize my tools...... great video !!!! Thank you Sr.
👍👍👍
I just got this. Been wanting it since milwaukee came out with it a few years ago. It was never for sale anywhere and about 7 months ago ended up buying the dewalt tough system. Bad Idea. I do comercial furniture installation and handyman work in comercial buildings. The tough system couldnt hold up to riding in a covered box van and rolling around on carpeted floors in office buildings. A wheel fell off the first day i used it. The pins in the hinges always needed pushed back in. The latches have tiny screws and cheap washers that are hidden unless you flip it over that are screwed into to the plastic that constantly fall out causing the entire latch to fall off. The clips that hold the smaller boxes to the lid constantly fall off. The entire back of the box has a giant crack down it. So i finally scored a packout. I am very happy. And anyone trying to decide between the two i can guarantee you will be unhappy with the tough system after a few months unless you do very light duty work.
Nice video. I have also organized my boxes for certain tasks. I have a box for working on flooring, another for doing millwork, another for drills and screws. It has worked really well.
Stay organized, stay productive! I like it!
3D print - you can make any partitions or sections of the insert containers you need. There is also models for duel level containers (ie: nuts below and the bolts on top of the trays)
great video dude! Thanks for putting in all the effort to make it!
Thanks for taking the time for the comment as well!!
Nice Video!! Thanks For Sharing.
Thanks for the comment!
This stuff is awesome! I've been looking in to options for my electrical stuff. Every time I have a project I go to the garage, gather all the tools individually and go to the project. Would be way nicer to grab a box of related items and go
Heck yeah! I think they are well worth the investment!
Hey man, you did a great review. Thanks. Buying one now.
Thanks for the comment!
You sold me. I'd been looking, but you helped me make up my mind, and this is what I want. Also, "fingerbang"? Damn, son. I'm an old lady. I almost clutched my pearls just then.
Learned so much from this video wow
Great video man
I just got one yesterday I love it. Only downfall is I can't close my tonneau cover with it .
U should put the medium box with the handle ontop of the medium small one so when you take them both the handle is at the top
That’s a great idea! 👍
In my country, the deeper vs slim organiser is a few dollar difference. I’ll get the deeper ones.
Hey mate, thank you for doing this review.
I bought a packout system a few weeks ago and now was looking to buy the clear top organisers when I found your video. Just a heads-up for yourself or other people is that you can get 2,3,4 and 5-way dividers for them that folk have 3d printed and are also selling on Ebay
I'm now just working out how to organise my impact sockets and bits. Hmmm...
This is what I did to avoid buying more stuff!
th-cam.com/video/rhHlL-pwBHA/w-d-xo.html
@@TheDurbinCompound Oh nice one! Cheers for linking me that, it will save a good few £
Min 15.24. It is not a design flaw. Its correctly done.
You cannot unlatch when attached together, but just unattaching and moving the upper box, then you will be able to latch the underbox.
You don’t need to split everything apart.
Great review , these are a different color in Ireland. Have one on order can't wait to sort my tools
Awesome! Glad to have some viewers from over the pond! Hope to see you around the channel!
European model is black , have mine on order as well
Google Milwaukee packout dividers and you can buy the x dividers and they have 5 way divider as well
Awesome!
Nice video. I hate watching It for this reason, I've got the Bosch Boxx system with roller, and I purchased 9 Milwaukee Fuel Stackables which I've adapted to the roller from a local lady. Now I want this shit. You're costing me a fortune 🤪👈
Jeez-a-lou!!! I'm still working out of Plano 20" tool boxes that I bought on sale for $1.99 after mail in rebate at Menards about 20 years ago. Disclaimer: I'm not a professional, just a handy finger-banger. Nice tool stack, but now I know why professional carpenters used to make their own custom wooden toolboxes...think I'll do the same.
😂😂😂 there aren’t cheap! That’s for sure!
@@TheDurbinCompound I can see that they're extremely nice and organized and for a professional, well worth it. I'm a bit of a low-bucker, and have scored several barely used Milwaukee corded tools from the late 90's on the cheap and I'm looking to organize them in my garage using large tool boxes so I can also easily take them with in my truck when I've got a project. After looking at what's available I'm beginning to think that building something with 1/2" plywood is the best solution for me. I've gotten a lot of mileage out of the Plano boxes and they've held up well. I'll continue using them for plumbing, electrical, and my measuring tools. I've even got 2 under the back seat of my 2006 GMC K1500 Ext. cab as they fit perfectly. One has mechanic's tools and the other is a general tool box with a cheap, cordless drill as the only power tool. You wouldn't believe what I've been able to to with just the hand tools in that little box.
Im actually considering buying the trays for fishing purposes..
@@letsgonow5641 There are a lot of less expensive options available that may also fit your needs better. Personally, I have a large Plano tackle box that's roughly 25 years old and for going in the boat a double layer Plano storage box holds more than I'll ever need. I use 3 rods with my 3 favorite lures that I use 85% of the time and I only lose a lure every few years. I'm still mourning the loss of the large jointed Rapala minnow that I had since the mid 80's that I lost 2 summers ago. I noticed that my line was nicked but I was hitting a particularly good spot on my drift so I decided to take a few more casts before cutting out the bad line and re-tying my leader (STUPID) when a large Musky hit and broke my line right where it was nicked. It was a particular favorite of mine and I had taken many fish with it over the years...RIP. I only have to go into the storage box a few times/year in the boat and almost never into the tackle box. As with most things, less is more and clearly even I'm over equipped.
You can take your dividers and make a slit half way in between so they interlock and have them make a cross. one needs to be slit half way up in the middle and the other half way down in the middle.
Yes sir! Even did a video on it! th-cam.com/video/rhHlL-pwBHA/w-d-xo.html
Lol sorry for repeating info. I wasn't aware you knew.
Was just able to watch that video and it was good. Thanks for sharing.
James Stone no worries!! Thanks for sharing! If you have any other ideas, that would be awesome to make videos on, let me know!
Lap joint?
Awesome vid. I'm definitely buying one. Thanks for the info
I have the deeper organizers and I 3d printed cups that fit into the other cups so essentially 2 of the slim ones stacked up
Oh that’s a great idea! 👍
Thanks for the AMAZING review.
Well thanks Sam I appreciate it! Who knew a impromptu video in my slippers would be so popular!
Nice video. I went with Ridgid Pro System, but hope to buy one Packout stack too to compare and contrast. I would like to attempt an adapter (3D printing) so a stack could be mixed and matched between the 2. Colors would clash, but would be cool as Packout is expensive, Ridgid is cheaper, yet don't have some of the cool containers Packout has.....
Someone on a budget could buy the Ridgid main system and some of the extra containers Packout.
Just watched it, regarding the 4 slots in those square boxes at the beginning of the video ... I can't think of anything small right now that you would put in such a small square box when you're in construction ... So I guess the reason why you have 4 slots inside those square boxes is just to have a longer lifespan.
So if a slot breaks for any reason, you can just flip that divider and continue to use it ... Just my thoughts.
Good video though.
Yes! I assume someone had some foresight on those dividers. I made another video on how I notched the dividers to fit together and make them in 4 spots. I use one for wire connectors, small wire nuts, and wegos.
@@TheDurbinCompound thx for the quick reply, I'll watch that video later, those boxes are probably bigger in real life than on video 😉 👍
Great review! Thank you. I’m thinking about picking this up. I already have a couple of the small boxes for screws so I think I’ll add the main stack
Thanks! I appreciate your comment!
You're gonna wanna run that T and P valve outside on the water heaters
Great job bud! I learned alot.
Thanks for the comment! I appreciate you!
Right out the gate I went to switch the compartments around and was like huh!? Won’t close? Then I realized damn I can’t move them. I might see if I can notch one of the 4 pcs I have maybe throw some rubber adhesive on it the semi seal it. Iduno just throwing ideas around. How much weight do you feel the whole setup can take? I have mine stack up... rolling/large/4medium/large low pro/2x half low pro/cooler. I never put the friggin $70 cooler on top really though, prob should of bought the regular cooler for $39 instead. 🤦🏽♂️ at times I feel like the handle is going to break especially rolling around a fresh construction site and/or up down stairs. I’ll be very tight if it broke! Nice rundown vid.
Good review 👍
There's also a spot in the lids of the bigger cases to mount one of Milwaukee's trackers.
I didn’t even notice that! Very nice addition! Thanks for the comment!
Thanks for the info. I am looking into this stuff and your video was very helpful
I’m glad it was helpful! That is what I set out to do!
I finally pulled the trigger and got the system. Only problem is the large box is real hard to separate from the rolling box. I know you said they’re stiff at first but I’ve gotta tug on it pretty hard to get it off. Is that normal and it just loosens up over time?
I feel like some of these were really stiff for awhile. Once you wear them in, they glide. Then they can easily pop right in and out.
Got mine love it
Thanks for the comment! I haven’t found someone who doesn’t love it!
Nice video man 🤝
information goes a long way!
I’ve gain a lot of Milwaukee tools this past month myself, I seen in the first box you had a Milwaukee circular saw? How is it holding for you since you’ve own it? Battery or corded?
Thanks 👍
Battery powered circ, non fuel. It does ok. It’s definitely not a corded model but it is nice for little stuff. If you’re doing a big project than it’s definitely not the tool to use.
TheDurbinCompound I did just pick up my packout kit today. Time to get little more organized now 👍
Awesome! Nothing but good things!
Nice video!! Can you keep going up with it after that last half box? Like if you had another half box beside it, could you keep building up with other pack outs containers?
Great video...thanks for making it!
Thanks for the comment!
what is your opinion on the locking mechanisms for each unit? I bought the Husky version of this and the plastic locks on the bottom/side of each piece worn out fairly quick, and MORE IMPORTANTLY when the unit stacked/locked unit would ride in the bed of my truck on its back (where it probably spends most of its time) it wold put a lot of force on these locks. If I buy the Milwaukee unit do you believe each piece will remain locked?
I liked n subbed because u r not sour for the keyboard warriors 👍🏽👍🏽😆😆
Shit I didn’t even set the large organizer up yet!? That would be dope if it does that! I’m gunna check when I get to the crib. You know my low pro organizers (all of them) lock it fine but are not as tight as the other boxes. They kinda have some play in them. 🤔 I’m trying to figure the best way to line up my 15g/18g w/ 2 batteries. They fit just not amazing. If you fiddle you can get the latch to close while stacked. I do that all the time unintentionally 😆
Cool. I thought about buy the one like this for my hvacr job. Thanks for the video
Take two dividers take a dremmel tool and cut both of them about half way down the middle so you can make 4 cubbies out of two dividers
I got ya buddy, subbed and liked.
Cool review. That 3 piece goes for like $200 now ... you got that and then added the organizer? Kind of what I've thinking ... "ToolManJoe" tricks his set up out with Kaizen foam ... thoughts?
Exactly what I did. The 3 stack is definitely worth it. I really like the Kaizen foam but I feel that it wastes a lot of space. I come from an aviation background where “all tools accounted for” is essential. Foam is great for that purpose but you lose a ton of space for other tools.
@@TheDurbinCompound the smallest of the three modules ... like $60? How many of those could the rack accommodate while using or not using the mid sized module if you follow? yeah, I see pros /cons on the foam ... thx.
The “small toolbox” could probably be 5 high on the bottom box and be just fine
good Video. Good Info, Thanks
Thanks for the review, i going to guy one of these after seeing your review.
Just watching a video of stuff I bought...😂✊🏽, excellent video subbed
Seems like prices have gone up since you published this. Nice video btw
Thanks. Yes the prices have been all over the place!
Great video!
Thanks so much for the comment! Hope to see you around the channel!
It’s great informative video, you didn’t talk about cost
Nice 👍 tool sets
Thanks for the comment!! 👍
You could flip it and bam the second way completed, kinda like a two fer.
Looks like the packout is a no go if you want to organize all your hand tools
Yes and no. My hand tools usually just sit in the main compartment. If you pack it tight, they don’t move around much when you pick it up
@@TheDurbinCompound i have the 24" hardtop bag. I was watching to see if its a good idea to switch to the packout
Probably not. The bag has a space for everything the packout leaves a lot to be desired in that aspect
@@TheDurbinCompound true. Thnx for the insight
Nice review cuz!!!!
Appreciate the comment! Good to see you around the channel!
2:50 3d print your own dividers. It's better that they left that option for you than not.
This is a cheap, free hack. Tons of people are making accessories 3D print changes the game!
Organizers in the midsize box are pretty fragile. The corners break off very easily.
Great Video
Thanks! Appreciate the comment!
what do you mean by saying.... you didn't"finger bang" the large box at the store!? LoL
I think its due to if its at your Home Depot, you will check it out and snap the boxes together and open close each one (which both makes a satisfying snap sound) over and over. Thus you will finger bang them some whether you decide to buy or not.
You could probably 'cross' those dividers with a Dremel?
th-cam.com/video/rhHlL-pwBHA/w-d-xo.html
@@TheDurbinCompound Power tools fix everything!
Hey! If I have one packout mounting plate secured to a wood garage platform is it fairly secure if every box has a mini padlock on it? We have a common shared garage area shared with a few neighbors. There's a webcam on it just worried about the quick getaway from an unidentified workman or something.
Can you fit 1 box of screws or 1 lbs of screws in one of the slim containers? I'm debating getting the bigger organizer but if 1 box of screws will fin in the slim I might just go that route.
It’s hard to get them to fit a 1lb box. I have gotten close but not the whole box. I lay them flat in the same direction. Below is a link to another video I did when I show how I organized my screws!
th-cam.com/video/0w0z16FV1XE/w-d-xo.html
I get my Milwaukee Pack out at ACE hardware and McClendons
If they allowed for the 2 small compartments in the middle of the organiser, where would they put their big brand name ?...........
Thanks for sharing. If you cut halfway through the middle of two of the dividers, you should be able to split a compartment into 4 without using glue. Just a tho't: I have not done this. FYI..I do have one of the thicker organizers and the boxes do not mount on the top. They will not even sit level on the top for the most part. Great idea, though. It'd be real slick, even if it cost 10-15% of the usable storage space. Rgds.
Outstanding! Thanks for letting us know that they won’t click in! I’ll probably do a video this week about making organizers and how to! Stay tuned for that! Appreciate the comment Terry
Thank you
Is the handle on the large box able to come up over the slim organizer when its on top?
Do the dividers come with the one that has the different cups or did you buy them separately? I just bought one and didn’t see any.
I love my PACKOUT systems, have both the red and black, the black PACKOUT holds my M18 and M12 tools, batteries, bits and blades while my red PACKOUT holds the hardwares, hand tools, electronics, and other miscellaneous items.
Very nice!!! I’m surprised they are so damn hard to find in the stores!!
I had the same issue finding both systems locally because it was sold out or not readily available, the black system isn’t available here in the U.S. so I ended up getting both the black and red PACKOUT systems online.
I did get the black PACKOUT from Italy via eBay.
Oh nice!
Kool dude 👍
I inspire to be you
Is it possible to lift the Handle of the large tool box up when there is one of the "slims" on top?
No you cannot. Just tried it.
In addition to your Jan 24th video for modifying the Packout bins to quads (th-cam.com/video/rhHlL-pwBHA/w-d-xo.html), it looks like some people are 3D printing their own bins in a variety of configurations ... 3, 6, even unequal quad partitions (th-cam.com/video/Kr_q6rWOKHY/w-d-xo.html). The notion that you might even color code the bins (outside of the Milwaukee red) is kind of interesting.
What is the height of the 3 primary Packout boxes when stacked with the handle down? I'm trying to figure out if they'll fit below my workbench before I order them.
Thanks for the review!
Awesome idea! The measurement is 32 5/16”. I’d definitely give 32.5”
The first one is 1 ton. The second 0,8 ton and the 3rd 0.5 ton. 😁
They are as heavy as they are sturdy. No magical materials.
First class.
The wheels do all the task. Do not attempt to use the second one alone full of stuff. Or buy a replacement shoulder.
like the video. thanks. how well does the small box open with an organiser attached to the top?
It opens great if you don’t have it all on the roll cart and the handle gets in the way.
@@TheDurbinCompound thanks man one more question. how well do you think the big box with wheels would hold up to a 300 lb guy sitting on it? Job sites tend not to be too accommodating at break time. :)
Also, I have the rigid set and it sucks trying to roll it over extension cords. I think wheel size is a factor. The rigid has much smaller wheels than the milwaukee. Do the milwaukee wheels get it over extension cords easy?
The box could hold a lot of weight. I’d put 1000 pounds on it. It would be fine. The wheels don’t really have a lot of ground contact when it’s sitting up. So it’s not a factor. Yes the cords are not an issue. I’ve never had an issue with thresholds or stuff on the floor
is it any good on stairs
You will probably find this video helpful. Easy answer is that it is ok but a lot of guys are pinning their handles so they don’t come off.
th-cam.com/video/vm6pSU7Btrw/w-d-xo.html
Don't like the fact that they always lock, unlike the DeWalt and Ridgid you can stack them without locking them, when your on the jobsite sometimes you just grab them and go without having to unlock them, plus when it rains those good get filled with water and grime and you to flip them over just to get the water and crap out
How could you see me smile? Are you hacking my computer 👨💻?
Can one buy the organizers separately?
I’m not sure. I have never seen them for sale separately
You can buy them separately, I've seen them on home depot website.
muudd220 sweet!
The modular system is awesome, but the no slide - out / drawer option IS a deal breaker for me. Ridiculous to have to unload this whole thing to get to the bottom if you have a full stack
Does your rolling box have a lot of play in the wheels ? Mine has a good 1/4-1/2” of slop in the wheels on the axle.
Humm I have not noticed much play in the wheels! Definitely not 1/2” of slop. Any way to tighten them up? I’m not looking at them right now
The nut just spins the whole axle. I just bought them and I’m curious if they are supposed to be this way or not. Thanks for the reply.
Let me see if I can find a solution to the problem! That’s a great video idea! Will conquer this tomorrow!
As promised. A video on how to tighten up those wheels!! Are Your Wheels Loose? - Milwaukee Packout th-cam.com/video/nRQLjL1rUr0/w-d-xo.html
TheDurbinCompound - one we had loose ans squeaky wheels... exchanged no problem.
Customizable or customization options!
Great video. But finger bang means something completely different to me ;)