Good tips as always :) I find even with a small gap on part of the seam, a little pressure with 2 sets of pliers solves the problem. Tough with freehand welding tho. as I always say, microscope solves all problems for fine welding, no hacks required :))
Hi, On your main channel page you have a image with black jewelry pieces that have jump rings attached on both ends. I am trying to learn how to attach jump rings to basic wedding band rings to add charms. Can you do a video, or suggest a video I can learn from? Thanks.
When it comes to welding the jump ring; does it have to be welded “on both sides”? My weld looks good on one side but then I turn it around and see the tiny line-is that how it’s supposed to be? Thanks so much!! Your videos are super helpful!
Whether or not you should weld on both sides, or on multiple sides, depends on the thickness of the jump ring and your power setting. If it is the case that it has fused properly on one side, but you can see the seam on the other, then the weld will not be secure in the long run. It would be better to weld on both sides. It varies with welders, but in general, I find that if I am welding a 22 ga jump ring, then 6-7 watts (joules) would be sufficient to weld silver, gold and gold filled securely. I point the electrode on top of the seam, on top of the circle (so, not the sides) of the ring. If any thicker, I use 9-10w power, and sometimes on 2 sides. I hope this helps.
I actually have a video and power chart for different metals and thicknesses. stonesandfindings.com/free-resources-page-pj-jewelry-making-information/optimal-power-setting-for-micro-welding/ For the new mPulse V2 - the power setting needs to be a little different. I have not made a chart for that but if you have that machine, use 6w for super fine 28ga or 26ga, and use 7w for 24 ga.
The Zapp micro welder is made in the USA. The price is US$999 + sales tax in your state/province. We ship around the world using DHL. If you need any further information, such as cost of shipping, please email us with specific questions and your postal address: sales@stonesandfindings.com Thanks Dana
No, sorry I don't. I have heard that it is complicated and not very reliable. There are paid courses online that you can purchase and the instructors might be able to help you. One of them is Linked Local New Jersey. I hope this helps.
Once the ends are weld, they're effectively melted together - it won't catch on anything. As far as whether it is lumpy looking, it depends on the power setting. However, when it is that fine, it's really not visually noticeable.
Is it normal for the jump ring to turn a little black on the spot where you weld it? What do you use to get rid of that? I saw you cleaned it with something. Thankyou for the video!
Oxidation is normal, and it is reduced and not completely eliminated with the use of argon gas. You can clean it with a fibreglass brush (they're inexpensive), and if you don't have one handy, but have a white eraser, you can use that. You can also sharpen the eraser to a point for smaller crevices. However, I find the fibre glass brush cleaner (no eraser bits on the table) and easier.
I would cut it off using flush cutters at the weld. You then trim the other surface by flipping the cutters. THen you have flat ends on both sides and can re-weld.
Some people use very low power like 3w, but that's not always secure because your hand might shake a bit. I find 24ga silver is best at 6w, 5w if you're using argon gas. It is secure and thorough. Welders sometimes varies a bit, and if you find your jump ring "flat topping" because of over-melting, then reduce the power slightly.
I use our own private label. They are light weight, spring action chain nose pliers that are 4.75". They sell for $13.50 ea on our website (product code TX035)
Thanks I will Order those. Also I’m considering the tronex grounding plier. A lot of good reviews on those. Do you recommend those or which do you prefer?
It should, it just won't be as pretty. Overlap it, and bring it back to not overlap, but grind the ends against each other while doing it. Don't over open - allow it to have tension of pushing against each other. This will make sure they touch. Even if you can't see it, you can sense that they're touching.
no reason other than it is inconvenient to bring argon tank to pop-ups, so I film without and show people the results. Argon is essential for large fabrication welding, but the effects are nominal at best when the weld is so fine for permanent jewelry.
Thank you I did! Just starting out and all of your knowledge is great!
That’s awesome! Keep it up. Thank you for this note!
Thank you! I want to weld my jump rings shut but I never have used or know anything about welding
Glad I could help - fine jump rings are a nightmare to solder if you're trying to solder close to fine chains. Welder is cleaner and sooo much easier
Thank you so much...I have been having trouble
Happy to read you found this helpful! Good luck and let me know how it goes.
Good tips as always :) I find even with a small gap on part of the seam, a little pressure with 2 sets of pliers solves the problem. Tough with freehand welding tho. as I always say, microscope solves all problems for fine welding, no hacks required :))
Great tip! A microscope is soooooooo useful!
What kind of microscope are you talking about? Please and thank you
@@AmandaMorgan-m5g Orion Microscope attachment for their welders
Thank you! I appreciate you taking time to do this video. I’m practicing for my first big pj event in 2 weeks!
You got this! Good luck with sales.
I appreciate you , Thank you
You are so welcome and I appreciate this note!
Very helpful video.. thank you!!
Glad it was helpful! Thanks for watching. Dana
Hi,
On your main channel page you have a image with black jewelry pieces that have jump rings attached on both ends.
I am trying to learn how to attach jump rings to basic wedding band rings to add charms.
Can you do a video, or suggest a video I can learn from?
Thanks.
I think you mean this video - welding jump ring onto a bezel:
th-cam.com/video/1QQPqZlNXmY/w-d-xo.html
@@stonesandfindings Thanks! I'm going to view it right now.
When it comes to welding the jump ring; does it have to be welded “on both sides”? My weld looks good on one side but then I turn it around and see the tiny line-is that how it’s supposed to be? Thanks so much!! Your videos are super helpful!
Whether or not you should weld on both sides, or on multiple sides, depends on the thickness of the jump ring and your power setting. If it is the case that it has fused properly on one side, but you can see the seam on the other, then the weld will not be secure in the long run. It would be better to weld on both sides.
It varies with welders, but in general, I find that if I am welding a 22 ga jump ring, then 6-7 watts (joules) would be sufficient to weld silver, gold and gold filled securely. I point the electrode on top of the seam, on top of the circle (so, not the sides) of the ring. If any thicker, I use 9-10w power, and sometimes on 2 sides.
I hope this helps.
Thank you thank you thank you. Can you show different sizes please?
I actually have a video and power chart for different metals and thicknesses.
stonesandfindings.com/free-resources-page-pj-jewelry-making-information/optimal-power-setting-for-micro-welding/
For the new mPulse V2 - the power setting needs to be a little different. I have not made a chart for that but if you have that machine, use 6w for super fine 28ga or 26ga, and use 7w for 24 ga.
Iwant like it How much tank you 👍
The Zapp micro welder is made in the USA. The price is US$999 + sales tax in your state/province. We ship around the world using DHL.
If you need any further information, such as cost of shipping, please email us with specific questions and your postal address:
sales@stonesandfindings.com
Thanks
Dana
Hello, I have the Amazon welder, and I am having the hardest time making the machine work. Do you have a setup video for this welder?
No, sorry I don't. I have heard that it is complicated and not very reliable. There are paid courses online that you can purchase and the instructors might be able to help you. One of them is Linked Local New Jersey. I hope this helps.
How smooth is the weld when you overlap the ends? I would be afraid the jump ring would catch on stuff.
Once the ends are weld, they're effectively melted together - it won't catch on anything. As far as whether it is lumpy looking, it depends on the power setting. However, when it is that fine, it's really not visually noticeable.
Is it normal for the jump ring to turn a little black on the spot where you weld it? What do you use to get rid of that? I saw you cleaned it with something. Thankyou for the video!
Oxidation is normal, and it is reduced and not completely eliminated with the use of argon gas. You can clean it with a fibreglass brush (they're inexpensive), and if you don't have one handy, but have a white eraser, you can use that. You can also sharpen the eraser to a point for smaller crevices. However, I find the fibre glass brush cleaner (no eraser bits on the table) and easier.
very helpfil :)
Glad to hear that! Thank for your note!!
Is this possible to do on gold plated silver, or will it ruin the plating?
Welding only leaves a small dot - the size of a poppy seed. It exposes the silver slightly, but will not ruin the plating
Hi, Can you tell me how to detach the welded jump ring from earring?
I would cut it off using flush cutters at the weld. You then trim the other surface by flipping the cutters. THen you have flat ends on both sides and can re-weld.
What do you consider low power?
For specifically 24 gauge.
Great video! Thanks in advance
Some people use very low power like 3w, but that's not always secure because your hand might shake a bit. I find 24ga silver is best at 6w, 5w if you're using argon gas. It is secure and thorough. Welders sometimes varies a bit, and if you find your jump ring "flat topping" because of over-melting, then reduce the power slightly.
You mention wholesale chains and finding. Where can I get that info?
Hi! You can see our wholesale prices once you register an account online - it takes about three minutes: stonesandfindings.com/my-account/
what pliers do you use to open and close jump rings? brand and number please
I use our own private label. They are light weight, spring action chain nose pliers that are 4.75". They sell for $13.50 ea on our website (product code TX035)
Thanks I will
Order those. Also I’m considering the tronex grounding plier. A lot of good reviews on those. Do you recommend those or which do you prefer?
Will the overlap work for a 24 ga too?
It should, it just won't be as pretty. Overlap it, and bring it back to not overlap, but grind the ends against each other while doing it. Don't over open - allow it to have tension of pushing against each other. This will make sure they touch. Even if you can't see it, you can sense that they're touching.
why not argon?
no reason other than it is inconvenient to bring argon tank to pop-ups, so I film without and show people the results. Argon is essential for large fabrication welding, but the effects are nominal at best when the weld is so fine for permanent jewelry.