Yinuogo - YNG150 - How to use HORMANN HSE4 HS1 HS4 HS5 HSP4 HSD2 HSE2 HSE5 HSE1 868 BS 868MHz ?
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Shenzhen Yinuogo Technology Co., Ltd
Tel：+86 18322929151
Email：evan.yinuogo@foxmail.com
Skype：+86 18322929151
WhatsApp：+86 18322929151
Hello, how to copy fixed code (red led) from Hormann to Yinuogo ? Original is HSE2 868 BS. Thanks.
To set the remote control with a red LED fixed code of 868MHz:
Please disassemble the new remote control and take out the battery. Then you need to press and hold the 1 button of the new remote control (note: the 1 button must be pressed and cannot be released). Use your other hand to install the battery. After the battery is installed, the LED light starts to flash. After a few seconds, the blue LED light will flash quickly. Please continue to hold the 1 button still. After a few seconds, the LED starts to flash the red LED light. After a few seconds, the LED starts to flash the red LED light and flashes quickly. The remote control code is switched successfully. Please release the 1 button. Now you can use the new clone to clone the old remote control. The cloning method is the same as the blue LED light.
Note: During the code switching process, please do not release the button. If you release the button, the code will fail to switch. Please operate it again.