A good way to make it more comfortable in hot and cold invirments is to take back off, and slide shrink tube over the tubular part of the frame and heat up. End result looks the same, but doesn't get hot or cold. Kinda like adding a rubber coating.
Just got my left side folder for my RAS47 century micro draco . Ordered it noon last Thursday, it was on the gun noon Saturday. Took less than 3 minutes to install. One bolt solid lockup perfect fit. Gun is awesome now. Thanx CNC WARRIOR
Dude, my thanks. I've been looking for a side-folding brace for my M92 PAP, and I thought I would have to go with either the PSA Triangle and a Stormwerkz adapter (more than I wanted to spend), or modify a CNC Brace. I wasn't aware they make models specifically for the M92 (I'm dumb and missed the drop-down menu) so I very nearly spent far too much money and effort welding a different model onto my gun. No one was focusing on installation and receiver backs, which is what I really needed to know. Appreciate it, man!
Thanks for the video, this clears up a lot, guess since my akv came with triangle brace they didnt include the tang "puzzle piece that I would need to install the cnc warrior brace, I appreciate you making this video, subscribed.
Excellent video brother! I've been looking at this brace for my new AK-P I got. Not too many people show the butt plate or the install. I wanted to make sure it had a somewhat decent "butt pad" area. The install I'm not too worried about because I've already done the ride dynamics M4 adapter on my WASR so I'm familiar with the rear trunnion already. Thanks again for the great video and the tip on needing the longer screw. I also see you didn't skip arms day at the gym! Ha ha ha 💪 Your Bi's and Tri's are gigantic!
Great info thanks! I'd prefer have that brace than a blade. I'm going for super budget but I dig that a lot more. Question..on the Draco how much does the left fold get in the way of the mag release, also do you have issues with drum mags in yours?
Thanks for the video helps alot . Maybe Im blind (wouldn't be the first time ) but I don't see any ATF paperwork on their site for this "brace " I don't even see a mention of ATF . Be careful with this one
So the mount on the one I received is made for the trunion with a flat rear plate, and it is not going to bolt to the back of the AK -V. I had to wait 6 months.
Hey man, sorry if you already answered this. But can I put this brace on my bone stock (sling swivel on the back) Nak9? Loved the video. Just can't figure out if I have to have any sort of adaptor for the brace.
Is the stock the same size as the one that came on ur akv? I got a ak pistol from psa and want that folding stock but I’m afraid if it’s gonna be shorter than the one it came with .
So if I buy the akv that come w the sb3 brace I can put the cnc warrior in with a direct fit right ?? But what if I buy the model with the folding stock do cnc warrior have a 1913 picatanny rail Mount version ?
Get the right side folder. I found the left side folder has the hinge that sticks out and is real close to your nose. Not good under recoil. Plus the right side folder you will be able to use a qd mount
So. I ordered a draco and it came with the 1913 pic rail on the rear trunnion. The bolt is in the center of the trunion. If i ordered the cnc warrior brace would the bolt line up with the hole thats already there.
A good way to make it more comfortable in hot and cold invirments is to take back off, and slide shrink tube over the tubular part of the frame and heat up. End result looks the same, but doesn't get hot or cold. Kinda like adding a rubber coating.
Just got my left side folder for my RAS47 century micro draco . Ordered it noon last Thursday, it was on the gun noon Saturday. Took less than 3 minutes to install. One bolt solid lockup perfect fit. Gun is awesome now. Thanx CNC WARRIOR
Did you have to drill through the rear trunnion to do that? Mine is just flat and solid and it appears you have to, but the CNC website is confusing.
Dude, my thanks. I've been looking for a side-folding brace for my M92 PAP, and I thought I would have to go with either the PSA Triangle and a Stormwerkz adapter (more than I wanted to spend), or modify a CNC Brace. I wasn't aware they make models specifically for the M92 (I'm dumb and missed the drop-down menu) so I very nearly spent far too much money and effort welding a different model onto my gun. No one was focusing on installation and receiver backs, which is what I really needed to know. Appreciate it, man!
Thanks for the video, this clears up a lot, guess since my akv came with triangle brace they didnt include the tang "puzzle piece that I would need to install the cnc warrior brace, I appreciate you making this video, subscribed.
glad i could help.
PSA sell them now for 9 bucks.
@WypipoFault you will need the akv tang "puzzle piece" psa sell em on their website
Great info on the brace and installation...nice AK pistol cool vid subbed 👍💪✌🇺🇸
Fold left, or fold right, that is the question, mere men as i ask,...
Dayum dude built like a tank 😂
Synthol
And oil tanker full of synthol oil lol
@Commie Hunter watch his 870 video and tell me those are real arms
Awesome video I just bought one for my AKV9 I just 👋 hit the bell 🛎 hope to see more detailed videos just like this.Thanks
Thank you for posting this
Excellent video brother! I've been looking at this brace for my new AK-P I got. Not too many people show the butt plate or the install. I wanted to make sure it had a somewhat decent "butt pad" area. The install I'm not too worried about because I've already done the ride dynamics M4 adapter on my WASR so I'm familiar with the rear trunnion already. Thanks again for the great video and the tip on needing the longer screw. I also see you didn't skip arms day at the gym! Ha ha ha 💪 Your Bi's and Tri's are gigantic!
glad i could help brother
Your video was a great help!
Bubba Ray Dudley juiced up.
Hoping to get one of these for my WBP Lynx.
Ha! 😁 I like this Guy. Kept it real thorough
Great instructional video . Thanks.
Extremely helpful!
Great video! You look like you can bend an AK with your bare hands lol I'ma need that routine sir 🤘🏼
Great info thanks! I'd prefer have that brace than a blade. I'm going for super budget but I dig that a lot more.
Question..on the Draco how much does the left fold get in the way of the mag release, also do you have issues with drum mags in yours?
What is the overall length with the brace unfolded on the AKV?
Does it come with a triceps like the one in video?
Ismail Aly those are biceps
Those are hematoma's
Andrew Macauley are you dumb or stupid.
What is the overall length of the pistol when the brace is folded?
Will the brace fit on the two guns on the side of your body? Good God my man! Great video btw
Just got this for the papm92. Damn awesome brace. Question, when you flip yours open, is there a threaded hole in the top tube part of the brace?
alex arias I’m considering going this route. How do you like it?
What hinge base would you use for a pak9
My god .....look at that mans arms.
Thanks for the video helps alot .
Maybe Im blind (wouldn't be the first time ) but I don't see any ATF paperwork on their site for this "brace " I don't even see a mention of ATF .
Be careful with this one
Agreed. This is definitely worthy of some federal time.
Thank you. It did help me alot
Can you add this brace to the regular zpap with no pictanny rail on back?
What did you use to take the two screws out of the 1913 adapter on the akp is it allen keys
DAMMIT BOY" them some huge fuckin arms!!!
Yeah right we all know it used to be a triangle stock before your arms bent it to look like that lol
So the mount on the one I received is made for the trunion with a flat rear plate, and it is not going to bolt to the back of the AK -V. I had to wait 6 months.
I like how he says Shhwing shwivl lol
@5:06 trop tunnion. This video is great on several levels
Just ordered my ak-v with the sba3. Which hinge base did you go with?
Hey man, sorry if you already answered this. But can I put this brace on my bone stock (sling swivel on the back) Nak9? Loved the video. Just can't figure out if I have to have any sort of adaptor for the brace.
Any update on this? Getting a nak 9 and I wanna know this
Great video buddy.
I want to put this folding brace on my NAK 9 too but somebody told me it would be illegal. Is it accurate ?
Thanks for the video. How do you get the rear swing swivel removed from the Draco nak9 in order to install the brace?
I believe it just unscrews i think i found that out when i was cutting it off with a hack saw.....
@@afflictionbuilder8427 haha alright thanks.
Is the stock the same size as the one that came on ur akv? I got a ak pistol from psa and want that folding stock but I’m afraid if it’s gonna be shorter than the one it came with .
So cool, just ordered one for zpap. :-)
Where did you find one online? Their website for me only shows the stock version
helpful video thanks
So if I buy the akv that come w the sb3 brace I can put the cnc warrior in with a direct fit right ?? But what if I buy the model with the folding stock do cnc warrior have a 1913 picatanny rail Mount version ?
Will the cnc warrior stamped receiver stocks fit the psa akv rifle configuration?
Great video thank you!
Why didn’t you show installing it on Nak 9 … how you remove the sling mount on back? Every video I see doesn’t show it 👎🏼👎🏼👎🏼
Do you k ow does this stick work on the psa akp also? Since it’s just a standard stamped ak?
Popeye thaaaaa sailor maaaaan
I don't comment off ... But good video bud and thank you!
Nice video. Which hinge base did you order? And is it considered Left/Right Hand?
Get the right side folder. I found the left side folder has the hinge that sticks out and is real close to your nose. Not good under recoil.
Plus the right side folder you will be able to use a qd mount
Which ak 9mm do you like more, psa akv vs nak9x??
Just got my brace yesterday same issue on my akv screws to short.. smh
This brace better than the sba3 tactical for a
Draco?
What did you use to drill the trunnion
Subbed
Alright so the stamped receiver one is what I need. Looks sweet.
Reminds me of my sam7sf stock just smaller
So. I ordered a draco and it came with the 1913 pic rail on the rear trunnion. The bolt is in the center of the trunion. If i ordered the cnc warrior brace would the bolt line up with the hole thats already there.
Ya it should take the 1913 rail off should bolt up with one center bolt my draco 9mm did so should be same all dracos...it will look sweetie
@@afflictionbuilder8427 thank you sir
How long is the brace?
So much oil in those biceps the US is about to invade lol
@Commie Hunter yep. So jealous of synthol injections in his arms😂😂👍🏼. I actually work out. I don’t use oil. Sorry for disrespecting your bf
@5:06 Trop Tunnion... youre welcome
Can you do the hand guard from mag pul
How does it work
Will this fit a mini Draco
You got pappa pump guns..lol
Shame it doesn't fold to the left.
did you have to drill that hole for the draco?
no it had a sling swivel hole i just unscrewed it
Can you sell me this stock buddy
will this work with my new PSA AK-P MOE SBA3 PISTOL, GRAY - 5165458004?
Yes
I doesn't look like an arm brace
But it looks like a stock but i know its a pistol brace