【ミニ四駆】Tamiya Mini 4WD Testing: Cleaning Jet Dash Motor
ฝัง
- เผยแพร่เมื่อ 4 มี.ค. 2016
- In this video we clean a Jet Dash Motor.
Tamiya USA: www.tamiyausa.com/items/mini-s...
Brooker Tracker RC: / 177250911703
Team SM4RT: / sm4rt
Techtonik Racing USA: pages/Techto...
Pacific Coast Hobbies: / pchobbies
hi sir i just wanna ask, what's better the one with the metal bushing or the one that dosent have it. Thanks! filipino fan here.
does applying the voodoo affect it alot? also where do we get a hold of voodoo here in the philippines and what are the substitutes for voodoo? thank you so much!
Can you use straight voodoo oil on the gears? I tried using it on rollers and I feel like it rubbed off really fast so i stuck with grease on the rollers... wondering if i should be using voodoo on my gears as well
although I do know you put it on the motor after cleaning for sure
Hi, thanks for your videos. Im learning a lot ;)
Wich rechargebla battery you can suggest me (quality/price)?
Really thanks again,
T.
Tamiya Neo Champ.
etong jet dash ba yung malakas yung magnet? dito kasi samin silver magnet tawag dun
What kind of oil or grease were u using ?
@Z3N Bluster can I use lighter fluid for wheel bearing and bearing rollers answer plssss
Sure.
If that Jet Dash with the metal bushing on either side is the more common one, does that make the one without the metal bushing is more special? what's the difference?
It is less common. I honestly don't know what the difference is. Someone from Italy told me that one without the bushing on the endbell is faster. But I have not personally seen one and how it performs so this is unconfirmed.
this might be very late reply but if you are still into the hobby i believed the one with exposed metal endbell you can replace the metal bushings for the ball bearings easily on both sides without drilling the plastic end. I have seen in when i was still a kid back in the late 90s. At that time i believed they produce 2 specifications for stock jet dash or for further modify jet dash. Both of them are identical in terms of performance wise. Otherwise, it would be in another category. Personally, for collections I would perferred the one with plastic end although both are discontinued.
hey @Z3N bluster... any suggestions on how to clean a power dash motor?... it should be necessary to cut out the stickers?... and what is the best should i do? ... clean it with contact cleaner?... or dunk it on lighter fluid like u do?... thanks! 😎
You won't need to cut the sticker label. The Power Dash already has vent holes. So this method still works for it.
@@Z3NBluster make sense thanks z3n.. it helps a lot
how is that charger pushing those batteries to 1.5 volts when they are generally limited to 1.2v? If it actually does, i gotta get me one!
Some Asshole After charged, the batteries after rest usually end up around 1.25v for me. That 1.5v+ you see only lasts a few seconds during peak charging to check the motors at the limit of the batteries. Actually, right after you unplug them from the peak charge the batteries start discharging right away and by the time I pop them into the cars they're probably 1.48v.
Thanks for the quick reply. What charger is that? I might have missed it in the video. Currently i'm just using 4 year old eneloop charger.
Also, i'm coming to LA this coming week for the Ultimate race on saturday. Is JT doing anything on Sunday? I heard some comfusing information about Ultimate doing either a speed race or a Filipino race on Sunday morning.
Sorry about all the questions! I'm just very excited. I haven't touched mini4wd in a year.
Cool, thanks. See you at the Saturday race, hopefully.
Some Asshole I work on Saturdays so you won't see me there.
in the official STO race , can we change the motor brushes if it wear out ?
+Dante hollow No
What is better gear with bearing or gear without bearing? Thanks Z3N. filipino fan here 🙂.
Use bearings as much as you can.
how about cleaning motors with wd40 or anything the same, would you recommend it?
You're just adding an additional step that isn't necessary. Also WD40 doesn't do that. It's designed as a Water Displacement Lubricant, hence the name WD. If you want to clean waterlogged parts then yes. Use WD40 to push out the water, then clean it with lighter flyid, then re-oil depending on what you're cleaning.
Can I use this method to clean other motors?
Yes, but you won't need to cut the label.
hello Z3N bluster may i know whats the peak voltage of that charger? i notice that your battery is 1.53V , however my powerex cant do that.. T_T
It's not really peak voltage that you're looking for on a charger. What you're looking for is peak amperage. The one in the video maxes out at 700ma charge rate. It used to reach 1.55v for NiMH batteries. This old charger helped push the batteries higher than normal because it had less safety features. On the SkyRC NC2600 that I have it can charge at 2600ma. This one can peak charge the battery sometimes up to 1.57v. my SkyRC MC3000 can sometimes push voltage up to 1.61v. Note: These voltage are really only useful for high speed racing. On Technical tracks it is better to charge batteries to more nominal voltages like 1.45v.
@@Z3NBluster for now we are playing Open set up tamiya motors only, thats why i need a charger that can peak 1.55v or higher, thank you for the info, now i have to review the model you said and im going to buy it. thanks again ^^,
Does the jet dash have more torque than torque dash?
Please kailangan ko po ng reply fast.
Ano ang Torque Dash? Kung ang ibig sabihin mi Torque Tuned? Alin na Torque Tuned? May Torque Tuned tsaka Torque Tuned 2. Iba Ang performance nila.
Torque tuned pala
mas marami ba yung torque ng jet dash kaysa sa torque tuned 2?
hi sir z3n bluster good day. may tanong po sana ako. eto na po
1. nasubukan nyo na po kerosene panlinis?
2. ok lang po ba ibabad yung motor ng matagal lets say 30min-1hr? di kaya matatanggal yung label ng motor?
3. what can you say about yung pang gising ng motor? like yung lalagyan mo ng battery yung holder tapos pipitik pitikin mo yung makina for 10-20sec mga ganun.. is it working talaga?
thank you sir and mabuhay po kayo. :)
1. Yes. 2. I haven't tried submersing a motor in Kerosene for a long time. Ive only tried cleaning with it, maybe for about 1 minute at the longest. It might remove the motor label, that is definitely a risk. 3. Pag-gising ng motor? It doesn't make sense to me.
what charger you're using in this video?
LaCrosse BC-700
is it ok using 9v batery on the motor when break in ?
Anto Kwok It's probably doable, but I don't recommend it. Depending on which motor, you could end up damaging the brushes instead of breaking them in.
Z3N Bluster
I'm planning to break in my motor hyper dash japan 2016 just like your tutorial in the video using 9volt batery (the square one)... Or is it not 9volt? I'm confuse.
I think you have me confused for someone else, I have not made a break-in tutorial video.
Z3N Bluster sorry :) So its not recomend to break in using 9v, but for cleaning, we can use 9v ? please advise, thanks
I don't recommend using 9v at all. If you're going to clean motors, you should just do it the way I do it. Buy one of those battery case for AA that I use in the video. 2.2v-3v is enough for 20 seconds. With normal and reverse polarity.
Can I just use RC bearing oil?
I haven't tried it so it's up to you.
sir. ano ba mas mabilis ultra or jet dash. same break in.
Jet.
Z3N Bluster thanks sa reply.
what is the best motor? is the plasma dash the best motor?
There is no, "Best Motor." The ideal motor is the motor that will make your car fast on the track whilst still being stable.
+Z3N Bluster what tamiya motor has the best torque?
Tactical Turtle Are you asking Best Torque or Most Torque? Those are two very different things.
Most torque
+Tactical Turtle Jet Dash.
Pwede din po ba gawin ito sa hyper dash 2? I found some na naka stock ng matagal mga 13yrs, gumagana pa rin. Pero gusto ko muna linisin. I hope you can reply. Tnx
Yes. Although, Hyper Dash 2 is out of print now and is a rare motor. I suggest you use something else.
Okay sir I have plenty of hd2 not being used and only ran a few laps 12 yrs ago. I was looking a method for cleaning a motor since it collected dirt from being stored. And btw, if you know Jeff Pesigan, he sends his regards
Tell Jeff that he is Fugly and that his Mom dresses him funny. :D
test run jet dash
Nazarul Suyudi I did. I ran it on the speed checker. :D
won't it get burned by turning the machine on in a highly flammable liquid?
Burn? For something to burn you need a fire. To make fire, you need something that combusts, oxygen, and something that ignites it. If the motor is fully submerged within the liquid and the electrical arc does not come in contact with oxygen. A fire won't start, then the motor won't burn. And besides, didn't you watch the video? Did I start a fire? :P
Z3N Bluster of course i have watched the video, it's a great and informative video. What do you think about using contact cleaner to clean the motor? which method is better?
+Kevin Mc This method is better. It can get more dirt out and it is more thorough.
Z3N Bluster and for the oil, is it good if i use all purpose singer oil?
+Kevin Mc I don't know. I've never used singer oil. Use whatever your local racers (that win alot) tell you to use.
Pwede ko po bang linisin kahit hindi ko na i ON ung MOTOR kapag binababad sa Zippo
Ewan, I've never tried that na babad lang. Kung meron ka RC Motor Spray puwede din yun.
why dont you use air compressor after cleaning then put oil after then test run for 15 mins. then oil again.
Ron Cabais Because I don't have an air compressor. Also this is a video of cleaning the Jet Dash, which is in the video title. This video is not for break-in.
what im trying to say is for to have better results after cleaning, you will have to use air compressor to clean through inside.
just a recommendation. yeah its a cleaning process just like the title you put on the video.
pede rin b ganyan process ng cleaning s ultra dash? hnd b mkkasama sa carbon brushed?
Yeah, it's fine. You won't need to cut the label to drain.
Z3N Bluster thnk you
Can i use different kind of lighter fluid?
You want to use a different brand? Sure.
But if i just shake the motor bcoz i dont have that thing to connect it to the battery
Find a jar that is big enough that will fit the motor side of a chassis. A Super 1 with a broken bumper would work. Put the motor that you're going to clean, into that chassis. Fill that jar with lighter fluid so that when you dip the chassis inside the jar, the level of the lighter fluid will rise enough to submerge the whole motor when you dip the chassis into it. Turn the chassis on while it's submerged with batteries(use old alkaline solution that you don't care about), that should clean the motor whole you dip it into the jar.
But i can do it without removing the bumber then well thanks Kuya Zen
Is it safe? Can it cause fire of the engine is on inside the oil?
Can I use singer oil?
I've never used it. So I don't really have any opinions on Singer Oil.
@@Z3NBluster how about loctite? Soaking my motor in a jar of loctite and let it run for about 5mins, is that okay?
whats the name of the charger are you using?
LaCrosse BC-700
@@Z3NBluster thanks for the reply
Saan niyo po binili ang jet dash? Kailangan ko po kasi bumili.
Sa Ebay
Wla po sa Lils?
@@strikerboyxd8100 rare na ang jet dash sir stop manufacture na kc
after gamitin un pinagbabaran nun motor hnd n b peden gamitin ulit
You can use it again. That's up to you. After a while it gets so dirty that the motors you're trying to clean will still have grime on the inside you'll need to flush out.
Meron bang mabuchi na jetdash?
Some of my sources say that there is. Just much rarer than the Johnsons.
Haha ang biles 54km. Kaya ng habulin ang Jeep. Zippo oil lang gamitin diba para bumlis konte?
No, I use Ronsonol to clean my motors.
Bka zippo fluid
is Jet Dash more powerful than Ultra dash?
+Mark Joseph Guevarra Yes and No. Ultra Dash has higher RPM. But Jet Dash has more Torque.
+Z3N Bluster i'm having some problem cleaning up with my Ultra Dash, pero nakita ko yung pag clean mo sa Jet Dash though. it will be a big help! thanks! :)
+Mark Joseph Guevarra The same principle applies. You just don't need to cut the label.
+Z3N Bluster can you make a video about on how to easily tune a motor? :)
+Mark Joseph Guevarra There are alot of videos that already show how to break-in motors out there. If I feel that the topic has been covered well before, I don't make the video.
Sir my breaking tutorial kay with silver magnet
I don't know what you're asking for. So, no.
does applying the voodoo affect it alot? also where do we get a hold of voodoo here in the philippines and what are the substitutes for voodoo? thank you so much!
does applying the voodoo affect it alot? also where do we get a hold of voodoo here in the philippines and what are the substitutes for voodoo? thank you so much!
try singer oil, the sewing kit lubricant thing