How to assemble/ disassemble Logitech G502/G500/G700 Mousewheel In this video i will show you how to assemble/ disassemble Logitech G502/G500 Mousewheel
Hey, thanks! I disassembled my mouse on a whim to polish the corroded wheel and then when I needed to put everything back I wasn't sure what to do with one of the springs and you explained it perfectly. Thank you!!
OMG!!! This saved me I thought I would never put the wheel back together. I was cleaning my mouse and for the life of me could not put it back together. THANK YOU!!!!!
Ralph Theart Haha, no problem, when i did this video it was a miracle that i found out how to put it back together. Thanks for the feedback, make sure to like and subscribe if i helped you out :D
I got the G502 from a colleague for 5€ because the mouse wheel wasn't working well enough for him. Disassembled it, cleaned it up and fucked up with the springs. Thank you for your video man!
I thought thas was a bit of incredible teaching. I love how you even simulated the action before actually doing it, you really think well from another person's perspective. You'd make a fine professional teacher!
I had corrosion on my mouse wheel after a good 5 years of use, to the point it would irritate my finger when using the wheel. So I had to take it out and sand it smooth. Thanks to your really nicely explained video I don't have to buy a new mouse just because of a rusty mouse wheel. I really appreciate your presentation and showing the progress at each step. Thank you very much for taking your time to shoot, cut and post this video for all of us to use!
So happy I found your video. By the time I got to reassembly of the mouse, I had forgotten exactly how those two springs fit. Love my g502 a little less now that I've had to open the thing, lol.
Very good video, had to clean my mouse wheel and this helped a lot for referencing what some of the springs originally looked like during the re-assembly.
Thank you! Had been sitting with this for over an hour, and it turns out that the spring @ 6:40 was out of alignment. It probably jumped out while I was trying to clean the scroll wheel and the 2 white "bars" jumped out.
Thank you so much! My mouse wheel free spin mode was getting jammed for some reason. Took apart the whole mouse and found out that some crap had collected in the mouse wheel bay. Blew it out with the air compressor, but I didn't pay attention to the way the springs for the mode toggle button went in and I ended up bumping them out of alignment. I couldn't figure out how to get the damn thing back together and then I found your video which showed me exactly what I needed. You have my endless thanks, without this video, I'd still be stuck in the garage screwing around with tiny ass little springs. I don't know why this video has so many dislikes, it showed me exactly what I needed. You've earned a like and sub!
I don't know what I did but the second spring is now too loose, so it doesn't really change "modes" as well anymore. I'm not too eager to take apart my mouse again after just doing it yesterday, but at least I know how to reassemble it should I decide to fix the spring now!
my middle click is not working properly, the left scroll and right scroll not working at all, when i open the mouse i need to push it really hard for left and right scroll switch, but i have no idea how the middle click work, it only has 2 small springs
how about the scroll wheel's optical is not responding anymore? does that means there is a problem on the optical pins on the pcb? I just replaced the right and left mouse buttons but after reassembling it back, the scroll wheel's optical is not responding anymore
Bro! I’m a new subscriber and i got a problem with my g502.. it just fell of on the floor and looses its scroll wheel click. Do u know how to fix it? I got it open in front of me right now and i just don’t know where i need to look to fix it.. I’m searching for some videos on TH-cam and u got this video.. I thought it would help me but no :(
@@fascinx6311 Hi mate, i've got the same wheel click problem you had before! Can I ask how did you fix it? I've disassemled and assembled the mouse different times but I don't know how to solve the click problem. I know that there's a "gold switch" beneath the scroll wheel component, all seems clear but still doesn't make the "click" sound..
@@fascinx6311 There is a two piece mechanism which interlocks itself with its teeth. If you put any of them in backwards that may cause your problem. Try to watch out for their orientation. Hope I could help
It's unnecessary to take it out, if you can't reassemble that transparent plastic and the mousewheel, you shouldn't even have started disassembling the mouse in the first place. Dummy
Cry for help man,went to clean and grease the wheel and i assembled it aight but scroll is completely dead now. Trying to find out what triggers scroll movement? Is it those two sensors left and right from scroll wheel?
@@hrvojebartolovic2545 Check if the sensors don't have any dirt on them. They sense the light passing through the little holes in the black plastic barrel of the mousewheel. This could be the problem I think. But if you don't manage to get it working again buy a new mousewheel assembly off of aliexpress.
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
![ถามตรงๆ กับ อาจตุพร ทำไม ประเทศไทย ใครเป็นนายก ก็โดนด่า พอออกเเล้วคนคิดถึง!!?? l [Nickynachat]](http://i.ytimg.com/vi/3YFLMXxBGAs/mqdefault.jpg)
Hey, thanks! I disassembled my mouse on a whim to polish the corroded wheel and then when I needed to put everything back I wasn't sure what to do with one of the springs and you explained it perfectly. Thank you!!
OMG!!! This saved me I thought I would never put the wheel back together. I was cleaning my mouse and for the life of me could not put it back together. THANK YOU!!!!!
Ralph Theart Haha, no problem, when i did this video it was a miracle that i found out how to put it back together. Thanks for the feedback, make sure to like and subscribe if i helped you out :D
Bro enserio muchísimas gracias, me tarde un poco en entender pero enserio me ayudaste muchísimo GRACIAAAAS GRACIAS ❤
Thank you very much!
You've saved many hours of my life. I've tried to install my wheel into the round holes instead of the square ones.
I got the G502 from a colleague for 5€ because the mouse wheel wasn't working well enough for him. Disassembled it, cleaned it up and fucked up with the springs. Thank you for your video man!
dude u helped so much, i thought ive lost my clutch on wheel but thx to you it works again, thanks man
I thought thas was a bit of incredible teaching. I love how you even simulated the action before actually doing it, you really think well from another person's perspective. You'd make a fine professional teacher!
Thank you very much, It means a lot!
@@mvdrap Np, but I should be thanking you for helping me fix my mouse wheel :D Thank you kindly MudRap!
I had corrosion on my mouse wheel after a good 5 years of use, to the point it would irritate my finger when using the wheel. So I had to take it out and sand it smooth. Thanks to your really nicely explained video I don't have to buy a new mouse just because of a rusty mouse wheel. I really appreciate your presentation and showing the progress at each step. Thank you very much for taking your time to shoot, cut and post this video for all of us to use!
The weel would not properly spin anymore so i cleaned it. Thank you, really helped a lot.
So happy I found your video. By the time I got to reassembly of the mouse, I had forgotten exactly how those two springs fit. Love my g502 a little less now that I've had to open the thing, lol.
How do I remove the wheel itself from the plastic?
Very good video, had to clean my mouse wheel and this helped a lot for referencing what some of the springs originally looked like during the re-assembly.
Thank you!
You are my hero
Thank you, i klick the like button later because i just have no mouse ^.^
Thanks mate
Dude thank you so much, you are a God my dude, now that I could clean my wheel, my mouse is working as good as new, thank you so much dude
That is a sick contraption, i love the engineering that went into this.
good content.
Ty. This is such a lifesaver
Really helpfull. I made a mistake while cleaning the wheel and you showed me what I did wrong. :D
Perfect, I repaired mine.
Perfecto reparé el mío
Thanks man, had to do it because the wheel was getting sticky. Rubbed the wheel from inside with alcohol now and it is all good. Much love
Glad to help!
You saved my mouse. Thanks.
Dumb ass me disassembled without taking notes. This helped me A LOT! Thank you!
Saved my life ❤️
Thanks for posting the video - very useful. Man oh man do I hate this mechanism!
Great detailed video!
Thank you! Had been sitting with this for over an hour, and it turns out that the spring @ 6:40 was out of alignment. It probably jumped out while I was trying to clean the scroll wheel and the 2 white "bars" jumped out.
Thanks for the video! A lifesaver!
erikharfager Glad to help you!
Thank you so much! My mouse wheel free spin mode was getting jammed for some reason. Took apart the whole mouse and found out that some crap had collected in the mouse wheel bay. Blew it out with the air compressor, but I didn't pay attention to the way the springs for the mode toggle button went in and I ended up bumping them out of alignment. I couldn't figure out how to get the damn thing back together and then I found your video which showed me exactly what I needed. You have my endless thanks, without this video, I'd still be stuck in the garage screwing around with tiny ass little springs. I don't know why this video has so many dislikes, it showed me exactly what I needed. You've earned a like and sub!
Aww man you made me feel i didn't make this video for no reason! :D
I'm glad that i could help you! :)
Thank you! You saved me :)
Thank you! that's really helpful..
Glad to be of help! :D
you saved me 60 euros thank you alot
You are awesome thanx dude :))
Pretty cool. By the way, it's identical for the G700.
Thank you for the information
I believe the g900 is similar as well, same module/assembly but different wheel.
However different from G700s...
U are a f genius
I don't know what I did but the second spring is now too loose, so it doesn't really change "modes" as well anymore. I'm not too eager to take apart my mouse again after just doing it yesterday, but at least I know how to reassemble it should I decide to fix the spring now!
really helpful thank you :D
Thankyou!!!!!
nice video, thanks for you esfuershon :D
Thanks a lot!
No problem! :D
I love you
my middle click is not working properly, the left scroll and right scroll not working at all, when i open the mouse i need to push it really hard for left and right scroll switch, but i have no idea how the middle click work, it only has 2 small springs
Thank You
Thanks!
I have a Logitech G500S and I found a loose small spring inside. Do you know where it goes?
Texas Cowboy I think its the mousewheel side click buttons spring
thank
thanks!
how about the scroll wheel's optical is not responding anymore? does that means there is a problem on the optical pins on the pcb? I just replaced the right and left mouse buttons but after reassembling it back, the scroll wheel's optical is not responding anymore
Hello, I have the same issue, did you managed to solve it?
I was here when there were 69 comments and he had 69 subscribers but now there are 70 comments
Haha I’m gaining so few subs lately
10:45 Im struggling at putting that thing back in the hook. It just doesnt want to go that far up
my mouse started to time to time stop clicking when I roll back. Probably will have to see what is going on there
I fucked my mouse up now i need to buy a new one not ur fault i lost a piece
Can i replace the g502 hero wheel to a g900 wheel??? Is it really compatible?? Please respond
I don't know the g900
I opened my g502, clean it but when assemblying it back, the scroll changing doesnt work. It is stuck. Any advices?
follow the video thoroughly
@@mvdrap my weel works, the problem is assembly and align it with the scrolling changer button.
Bro! I’m a new subscriber and i got a problem with my g502.. it just fell of on the floor and looses its scroll wheel click. Do u know how to fix it? I got it open in front of me right now and i just don’t know where i need to look to fix it.. I’m searching for some videos on TH-cam and u got this video.. I thought it would help me but no :(
🤠
Already fixed it.. you late lol
@@fascinx6311 Hi mate, i've got the same wheel click problem you had before! Can I ask how did you fix it? I've disassemled and assembled the mouse different times but I don't know how to solve the click problem.
I know that there's a "gold switch" beneath the scroll wheel component, all seems clear but still doesn't make the "click" sound..
@@robertodalipaj4113 just disabled the click.. nevermind it.. i don’t care about the wheel clock. Fuck it lol
@@fascinx6311 There is a two piece mechanism which interlocks itself with its teeth. If you put any of them in backwards that may cause your problem. Try to watch out for their orientation. Hope I could help
is it possible to replace the whole mechanism from G500 toG502?
Nah I don't think but the wheel is interchangable
TapL Brought me here.
ッJovannyy who is tapl?
my parrots chewed the rubber part around my scroll wheel off :(
i recoomend you to get the metal one my en isnt reallly good
lmao chew their skin off for revenge
You didn't take the wheel out of the plastic
It’s the most basic thing to put back that’s why I didn”t get that out. Just pop it back in.
MudRap I had lots of trouble with it. I was scared the plastic would snap, so I just reassembled it
take the wheel out too or it didnt happen
It's unnecessary to take it out, if you can't reassemble that transparent plastic and the mousewheel, you shouldn't even have started disassembling the mouse in the first place.
Dummy
It doesnt click when I use the middle click what happened?
G700s
Fucking love you bro thank you
Cry for help man,went to clean and grease the wheel and i assembled it aight but scroll is completely dead now. Trying to find out what triggers scroll movement? Is it those two sensors left and right from scroll wheel?
did you manage to figure it out, I am having the same issue, however I didn't take my apart just removed it and now it's not working anymore.
@@m3rlaut no man I just replaced it with a roccat mouse....no solution to be found
@@hrvojebartolovic2545 ok thanks.
@@m3rlaut NP if u figure it out please do share...i still keep it in a drawer lol
@@hrvojebartolovic2545 Check if the sensors don't have any dirt on them. They sense the light passing through the little holes in the black plastic barrel of the mousewheel. This could be the problem I think. But if you don't manage to get it working again buy a new mousewheel assembly off of aliexpress.
Hi TapL
Blahdimir who’s tapl?
he watched this video while streaming himself fixing his mouse
Oh that’s awesome! Anywhere where I can watch it?
th-cam.com/video/A3x9uOqC0-k/w-d-xo.html found it finally
Why the fuck does it rattle
instead of doing this just press the button directly under the scroll wheel