What you should NEVER do with the Betterpress!!
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Everyone is having great results with the Betterpress system.... except for me! What am I doing wrong!? Find out, so you can avoid this mistake too!
You can buy the BetterPress Letterpress here:
ldli.co/e/gq27dpn [ spellbinderspaperarts.com ]
----------------------------------------
STANDARD SUPPLIES:
These are supplies I always have on hand and use for almost all of my cardmaking.
TOOLS:
• Platinum Die Cutting Machine
--- hldli.co/e/6l04952 [Spellbinders]
--- amzn.to/3XJ8Lks [Amazon]
• Gemini Go Die Cutting Machine
--- shrsl.com/4c4ma [Scrapbook.com]
--- amzn.to/3tfBxOK [Amazon]
• Empress - Die Cutting and Embossing Machine
--- ldli.co/e/gq2772x [ Scrapbook.com ]
• Spellbinders Betterpress System
--- ldli.co/e/gq27dpn [Spellbinders]
--- amzn.to/3O55QOT [Amazon]
• Scor-Buddy & Bone Folder
--- shrsl.com/47zmy [Spellbinders]
--- amzn.to/44CNwDi [Amazon]
• Fiskars Spring Loaded Scissors
--- shrsl.com/47zn9 [Scrapbook.com]
--- amzn.to/3pyvGCF [Amazon]
• Tim Holtz Glass Mat
--- shrsl.com/47zni [Scrapbook.com]
--- amzn.to/44EiDhU [Amazon]
• Heat Tool for Embossing
--- shrsl.com/47znp [Scrapbook.com]
--- amzn.to/3pAiflF [Amazon]
• Sidekick Cutting Machine
--- shrsl.com/48xyq [Scrapbook.com]
INKS
• Hero ArtsBlack Ink (Safe for Copic and Watercolor)
--- shrsl.com/47znt [Scrapbook.com]
--- amzn.to/44uqVJa [Amazon]
• Versamark Clear Embossing Ink
--- shrsl.com/47znv [Scrapbook.com]
--- amzn.to/3XGlwMR [Amazon]
• Versafine Black Embossing Ink
--- shrsl.com/47znx [Scrapbook.com]
--- amzn.to/3JOHiIt [Amazon]
• Distress Blending Inks
--- shrsl.com/47zny [Spellbinders]
--- amzn.to/3O584xJ [Amazon]
ADHESIVES:
• Art Glitter Glue (The BEST!)
--- shrsl.com/47zo0 [Scrapbook.com]
--- amzn.to/3JRzhCr [Amazon]
• Low Tack Purple Tape
--- amzn.to/46HUkkF [Amazon]
• Foam Tape
--- amzn.to/43k1FnC [Amazon]
PAPER:
• Neenah Solar White 110lb
--- shrsl.com/47zo4 [Scrapbook.com]
--- amzn.to/3JQ3uly [Amazon]
• Betterpress Cotton Paper
--- ldli.co/e/nqo555o [Spellbinders]
--- amzn.to/3NKInSH [Amazon]
•Crane’s Cotton Paper
--- amzn.to/3O6u2S5 [Amazon]
STORAGE:
• 7.5x5.5 Storage Sleeve
--- amzn.to/3PK8rA5 [Amazon]
• 9.5x7 Storage Sleeve
--- amzn.to/44i0XZw [Amazon]
• Magnetic Sheets for Dies
--- amzn.to/3JPXVmY
• Marker and Colored Pencil Case
--- amzn.to/3XIov7s [Amazon]
COLORING MATERIALS:
•Arteza Watercolor Brush Markers
--- amzn.to/3pDKcJf [Amazon]
•Ohuhu Alcohol Markers
--- amzn.to/3JUTyHl [Amazon]
•Copic Alcohol Markers
--- amzn.to/44ihPPE [Amazon]
•Watercolors
--- amzn.to/46EfWhZ [Amazon]
•Silver Watercolor Brush
--- amzn.to/3JQ5U3q [Amazon]
•Watercolor Pencils
--- amzn.to/3D4aIhW [Amazon]
•Prismacolor Colored Pencils
--- amzn.to/3O7BMmT [Amazon]
•Metallic Gel Pens
--- amzn.to/3JQ6gXL [Amazon]
MISCELLANEOUS:
•Sparkle Embossing Powder
--- shrsl.com/47zoi [Scrapbook.com]
---amzn.to/3pOS3Ua [Amazon]
•Clear Embossing Powder
--- shrsl.com/47zok [Scrapbook.com]
--- amzn.to/3OhaDhv [Amazon]
•Glossy Accents
--- shrsl.com/47zol [Scrapbook.com]
--- amzn.to/44EtWqm [Amazon]
•Other Embossing Powders
--- shrsl.com/47zqg [Scrapbook.com]
•Gems
--- amzn.to/3O6cVQ5 [Amazon]
Wink of Stella
--- shrsl.com/47zq4 [Scrapbook.com]
--- amzn.to/43hi78f [Amazon]
• A2 Rectangle Dies
--- ldli.co/e/kqr0o1p [Spellbinders]
--- amzn.to/3rpVO3a [Amazon]
• Black Fineliner Pens
--- amzn.to/3XO6jJt [Amazon]
Affiliate Links used at no cost to you
As another new TH-camr I always like to show my mistakes. I think it helps to show that like everyone else we make mistakes, plus I know I like seeing how to fix issues so why wouldn't my viewers? I appreciate you making this video because like you I probably would have made the same mistake. It'd just as important knowing what not to do.
Thank you! I’m glad it was helpful!❤
I love that you shared this. Mistakes are the most important lessons for us creators and crafters learning. ❤
I give you lots of credit for sharing your difficulty with this machine. Many crafters would not do this. It just shows that even seasoned makers are not perfect. ❤❤
IT HAPPENS...YOU WERE FOCUSED ON THE IMPRESSION AND NOT THINKING ABOUT THE TAPE. it HAPPENS..THE MAIN THING IS THE LIGHT FINALLY WENT ON AND NOW YOU ARE GETTING GREAT PRINTS. WE LEARN FROM OUR MISTAKES BUT THANKS FOR SHARING. I've DONE THINGS LIKE THIS MYSELF. thank GOD THE LIGHT FINALLY GOES ON.
I used the yellow tape once and it ripped the card when I tried to remove the tape. I now use some low tack purple tape I bought from my local hardware store. It works perfectly, but I tape the corners of the card, I don't use it under the card. Good video of what NOT to do! Thank you🙂
Thanks for sharing! I’m glad it was helpful!
You just described my experience with foiling. Everyone else can do it, perfectly no less, and not because they chose to use a machine (as there are other ways to foil). In my case, I tried for more than 8 hours one day to try to foil. The laserprinted image held only speckles of foil, and that was after going through the laminator over a dozen times (the speckles were a victory; usually absolutely no foil whatsoever adhered to the paper). I changed every possible variable… paper, laminator, foil brands, the image, the printer… resolving to NOT buy a machine if I couldn’t get at least some sort of result without one.
Unlike you and this letterpress thing, the foiling still doesn’t work for me, so I tossed it all and haven’t made cards in over a year. When the thought no longer infuriates me, I’ll consider returning to what had been a much-loved hobby.
I totally understand with the foiling! I was so frustrated too! My results are still inconsistent at times! I hope you get back I to cardmaking though!❤
Maybe have a go with the glimmer? That's pretty easy.
I'm sorry. Hope you get back into cardmaking
I discovered that I can successfully foil using plain ol' glue and double-sided tape. Haha! I foil the way we'd use gilding flakes and am happy with at least that. Keep the faith!
You had me laughing. Every time you put your hand on the tape, I thought she'll get it now. I'm guessing you had a long day or you hadn't eaten yet.
Two things, I watched another TH-camr and he did do the tape like you, but he didn’t use such big pieces, he used to tiny pieces on each end. He also rubbed the tape on the back of his hand before putting it on to make it less sticky. I don’t know if you would want to try it that way again, nor if that would make a difference or not. But thank you for being brave and posting your mistake. I’m sure it will help others. Glad you got it figured out.
Thank you!❤
So glad you figured it out. In the heat of the moment all we're thinking is why isn't this working. And getting more frustrated all the time. On screen your sentiments don't look too bad. I'd die cut them and see what is usable. Thank you for sharing
Thank you! Yes, i think some of the sentiments will be salvageable!
Thank you for sharing your mistake. My husband just bought me a Better Press machine for Christmas. I appreciate you showing your difficulties!
Glad it was helpful! The betterpress is awesome! I’ve been enjoying it more as I’ve been using it!
Like others have said, please don’t be so hard on yourself, we all have problems or make mistakes. I like you have a tendency to be hard on myself but we are all in this together. Showing your videos with the problems helps many other people. Thanks for sharing and have a great day!!!!!
Thank you so much!❤
LOL I immediately said NO - no tape on the back under the plate! Glad you figured it out and shared it with us!
Lol! You’re smarter than I am!
I'm a new viewer and really admire your willingness to share your mistakes. So helpful to those of us new to Letterpress. Brava.
The yellow tape is garbage for taping anywhere important. I found that out stencilling. I like the desticking idea below. Thanks sharing your journey! So appreciate your transparency and honesty!
Thanks so much for watching!
I think it is very generous of you to share this. I am sure you are not the only one - and you will have saved me from falling into that trap whenever I do succumb to the charms of the Betterpress. It is so helpful to see how mistakes can be avoided and that others sometimes struggle, too. Thank you and kind regards from Germany, Nicola
Hello Stephanie, I did not know about the tape in the back, thanks for sharing it will make a difference. Happy crafting.
Glad it was helpful!❤
I think it is because you have 3 masters that it took you so long to figure it out. You were looking for something technical. Had it been me I would have probably moved the die to a different spot on the plate and then maybe I would have realized what was making the impression bad. Glad you figured it out for all of us.
😂 you’re probably right!
I’m impressed with your persistence and your willingness to share this with everyone! Good thought process. Thanks
Thank you!
My Betterpress is "in the mail" [from SMS]. Soaking up all the videos I can before it arrives! So good to see a "blooper" reel . . . mistakes can teach.
Glad it’s helpful! I hope you enjoy your betterpress! ❤
Yes, it's similar to having a fold in one of the shims. Glad you figured it out! If the yellow tape keeps tearing your paper, try sticking the tape to your shirt first to "fuzz it up" a bit before adding it to your papers.
Thanks for the tips!❤
I just got my betterpress, and your video is the first video I watched. I really apptreciate this.
I used a piece of sizzix removable sticky grid on mine. I did a few videos showing that helped me instead of using the tape. Your cards are beautiful.
Thanks so much!!❤
That was fun…I played along as I just got my BP and I know how easy it s! Saw that yellow tape and figured that was the problem. But watched to end to see when your light bulb would turn on! You were a really good sport about it! FYI, I use a little roller adhesive on the back top corners….works well and no bulk.
Thank you!
Thank you so much for this video. My better press has not arrived yet so I am watching as many videos as I can to learn about using it.
That yellow tape is really too strong for what we use it for That’s why it’s in the drawer ! I like the mint tape it works great and it never tears the paper
Right?! It’s interesting that it’s what they included with the press…🤔
Thanks for sharing for us new letterpress users we would probably do the same mistakes so thanks for stopping us doing the same mistake
Glad it was helpful!
Please don’t be so hard on yourself, and Thank you for leaving all of this video in the demonstration.❤️
Thank you! ❤
@@InaNutshellCrafts You’re very welcome🌹
I use Tombow removable tape runner. I have to clean the platen every once in a while, but it works for me.
Thanks for the warning, I've seen others TH-camrs put tape on the back and I didn't notice a mess up. *I agree about the yellow tape, it's for other projects, not the better press. Actually I have been using mint tape and that's gentle enough. I will say that after I got my BP, I really wasn't wowed over it. Does it look nice, yes..is all that and a bag of chips? Probably not.
Yes, I like the mint tape too. And I agree- I’ll have more thoughts on the betterpress in my next video…. Where I think it really adds a nice touch is on the interior sentiments, actually! But I do think it’s a “nice to have” not a “must have”
I received my first card made with a Betterpress and I wasn't wowed either. My expectations were obviously too high. When I reflected back on the "awe" of some of the influencers, I was puzzled. Glad to hear I am not alone.
@@robincooper9323 they don't call them influencers for nothing. 😏
@@mzp6620 😀
Thank you so much for this video!!! I have the Betterpress system but haven’t had time to do anything with it!! I am so glad you shared these issues so I can hopefully avoid them!! ❤❤
Thank you! Glad I could save you from my pain! 😂 ❤
Thank you so much for sharing this - I saw the one You Tube where she put the tape on the back - not the corners; so I would of not guessed that it was tape placement either. Especially after viewing You Tube Videos where they did put the tape on the back of the card and not the corners and still had success.🥰
Yes! That’s part of the reason it took me so long to figure out! Other people on TH-cam did it, so I didn’t think anything of it! Glad it’s helpful info!❤
I use temporary adhesive tape runner. It works like a dream . I find the yellow tape does the same with my cards.
I need to get some! Great tip!
A great process to share; I appreciate your generosity in sharing it.
Thanks for sharing. I just got my Betterpress for Christmas and although I hadn’t tried putting tape on the back, I now know (thanks to you) to not do that!😆 Also, I agree, the yellow tape is terrible. I thought it was just the cardstock I was using, but it even tears the “fancier” paper a little, too. I noticed on another creators video that they chose not to use the tape…now I know why!
Glad I could help! Enjoy your betterpress!
Iv been craafting for 30 years. It would not have been obvious to me. Now all my machines are bidshot..expression and switch. But thats another adventure .😊
Glad it was helpful!
thank you publishing this video...I too saw other youtubers put tape on the back with no isuue...so I would have made the same mistake. This was very helpful.
Glad it could help! Thanks for watching!
Thank you for sharing, I should receive mine today and being doing lots of research so I do not have any issues.
Thanks for the video. I haven’t opened my box yet so this will help me avoid this problem.
Glad it helped❤❤
I was lucky...I watched many videos with different crafters who said to use tape on corners. Don't be tough on yourself...live and learn!
Thank you for sharing your experience…I have yet to try out mine, but it helps to know what works and what doesn’t. I’ve had tape issues from some that are supposed to be awesome because it doesn’t tear the paper…not…
Glad it was helpful!
I figured it out the second I saw you put the tape on the back.
😂
Thank you for showing me what not to do! Not an idiot, just a learning curve. Thank you.
Recollections repositional glue runner works great for holding paper in place without adding any bulk in back. It holds great, the paper releases with ease and the glue just rolls off with your finger when you're done
That's a great tip! Thanks for the info! I will try that!
Sometimes it takes.a few tries before we figure things out.☺ My opinion of the yellow tape is the same - tearing everything.
I’m grateful you showed how to avoid the mixup. Nice cards.
Glad it was helpful!
I love this! I did get it right away, but this video is really important. And I don’t like that yellow tape for anything!
Thank you for sharing! It begs the question why the others aren't having the same issue? I've seen them do it myself, and their stuff turns out beautifully.
I’ve had the same question. When it first came out I saw other people using tape on the back and theirs came out ok. But, I’ve learned it doesn’t work for me for whatever reason! Maybe the thickness of the tape?
Thank you for the warning!! I didn't think of it till you said it- and Txs for the heads up about yellow tape- much appreciated!!
You are so welcome!❤ glad it was helpful!
Thank you for your honest review. We’re not trying to sell it with the link. I was thinking about getting one and I saw this and I’m think I’m gonna wait. Thank you.
Glad it was helpful!❤
Great video. I always appreciate knowing what NOT to do videos. I did figure out it was the tape, however, I may not have realized it and would have done the same thing had I not seen this video. 😊 I got the better press system for Christmas but haven’t had the chance to play with it yet, but tomorrow is my day😊😊😊. So I truly appreciate your video!. ❤
Thank you! I hope you love your betterpress! The more I’ve played with it, the more I like it. It’s great for making a lot of card fronts quickly!
I think it’s the exact spot where the tape is…. Adding more pressure in that spot…
Yup! You’re smarter than I am! 😂
I would have made the same mistake when mine comes, appreciate you showing your problems, we all learn from experimenting
Thank you! Glad my mistakes can keep you from doing the same! 😅
I do love the rather scientific way you test your hypotheses!
😊 thank you!
I saw it right away. But don’t feel bad. I ruined the platen by die cutting😥
Oh no😢 sorry girl
You know I watched this again. I really had no idea the first time. But I really wanted to thank you for showing us this. I mean really how would you know? This will help many people I am sure. So thank you so much. :)
That’s so nice of you to say! Thank you!
I had issues with better press paper too, I got a better lucky with Bristol and Carson waterpaper
That's odd. Spellbinders are selling high quality cotton rag from Europe that professional printmakers use. Is it possible the paper that works better for you is thinner? Maybe you had too much pressure with the thick cotton paper.
@@RamoArt sorry I should explain better, my issue is removing the tape of the paper...😁
Thanks for sharing. I probably would have done the same thing. 😅
😃❤️
you are not silly, I have not received mine yet and so I appreciate your video very much thank you.
❤❤❤
That's funny that you say no one has been having trouble with the yellow tape and the better Press paper bcuz every single YT crafter I watch has torn that paper and says to be careful with the yellow tape and other tapes. 😂 the second I saw the doubled up tape, I said that's causing the extra pressure and I have zero master degrees. Don't feel bad, I find this happens often unless there's an understanding how the tiniest bit of extra material affects the pressure in any activit. I play around with it lots. As a matter of fact, when you want regular dies to foil a thicker line, add tape or a piece of a plastic bag to the sandwich under the entire design. Kinda the same thing that you're doing here but it is a desired effect instead of a defect.
Oh that’s a smart idea to keep it in the back of my mind in case I want that effect on purpose! Thanks for your kind comments ❤️
Great video and i agree with you…that yellow tape is awful. I just put it at the very edge top and bottom so it does not tear the paper. I thought it was the next best thing in tapes but nope!
To be fair, the best ever craft tape was designed to work with smooth cardstock. Cotton rag is very different. As an artist I work with this kind of cotton paper all the time and I've just learned to be more careful when peeling off tape. Even if the tape pulls away some fibers, as long as you do it very slowly it won't be very noticeable.
@@RamoArtthat’s good to know!
Glad I’m not the only one!
Thank you for sharing. I just got my machine. I have not try it yet. So thank you because I probably would have done the same thing.
You are so welcome! Happy to spare anyone else my frustrations! ❤ hope you enjoy your betterpress!
wow I actually found someone else who buys from Stacy Parks otherwise known as scrapbooking made simple. I have been watching her for about 5 years and you are the first person I have come across who actually buys and makes videos using her products.
I have been watching SMS for years. I just heard my name a couple weeks ago for "winner winner chicken dinner".
@@susan3744 congratulations
@@pattyfromherz9965 my husband could not believe that I was so excited about winning $25 especially in light of how much I spend
@@susan3744😂😂😂
Yes! I only discovered her because of the betterpress, actually! I came across one of her videos on it!
I didn't think of the tape because I thought I saw others do that.
I've never seen anyone with this issue. Did you curl or ball the tape on the back? I just fold thenon sticky in half and lay it down on the plate
Use the LEE Highlighter tape. It's awesome
@@elisasalat2919 thanks for the tip!
Thank you for sharing this
I have learned quite a bit tonight.
Glad it was helpful!
It's obvious---the tape on the back of paper gives a deeper impression.
Just the kind of mistake I would make 😂 just some days we are slower on the uptake processing is all. Probably bc our brain is is so busy in creative process at the moment
😂😂😂
I had no idea until the end, but I don’t own one.
I’m pretty sure I saw Jennifer McGuire put rolled up tape in the centre.
I think I saw that in her video or another, which is why I didn’t think it would be a problem 😃 but, live and learn!
Your tape is in the wrong place, right? Because the problem was in the same spot. The fuzz was from what you use to clean with probably this does look very interesting
It looks like the smudge is where the tape is. Could that thickness be too much? Don’t be so hard on yourself. I love your dedication!
You’re right! And Thank you!
Thanks for showing your process. My BetterPress is under the tree and this will help me as I learn. Question: can the Glimmer plates be used in the BetterPress?
Hi! They say that they should not be used with the betterpress, but that the betterpress plates CAN be used with the glimmer. However, I have seen people use the glimmer plates with the betterpress…. So it’s sort of at your own risk. I’m planning a video on this topic in a few weeks! Stay tuned!
@@InaNutshellCrafts I was told that the glimmer plates are thicker but I laid them face down to compare and I couldn’t see a difference in height. I’m thinking that taking some of the shims out might help if they are thicker.
It's the tape in the middle
Yup! Took me way too long to figure that out! 😂
Thankyou
Thanks for posting this!
Glad you liked it!
You're supposed to gently tap ink on. No rubbing, no swirling the stamp.
Yes, I learned that after the fact, lol 😆
You're so funny. I don't even own any of that stuff, can't afford them. Lol ❤️
I haven't finished the video, but I'm going to assume it's because you put the tape on the back which is adding pressure to that specific part of the paper.
Edit to add: The extra pressure is what is causing the tape to rip your paper as well. A lot of low tack tapes REALLY sticky when put through a die cut machine because of the pressure.
You’re totally right!❤
Thats in front of the tape, isnt it? So theres different pressure because of the clump of tape behind it. I'd put it on the very corners (even on the back) and not over text or an image. Someone also said the tape tearing can be due to how fluffy/fibrous the paper is. I'd take some sticky off on my clothes first.
Yes! It was! Good eye!
I did not figure it out. Lol Good video.
😂😂😂 glad you enjoyed it!
So obvious once it’s been explained but isn’t everything? 😊
Yup!😂
Good info
Glad you found it helpful!
Maybe it’s the way you have the tape bunched up on the back
Yup that’s what it was! 🤣
It is the tape placement
Yup! Took me so long to figure it out!😂
the red cube ink is hero arts
Thanks!
With the black ink that comes with the Betterpress… can you use Watercolor or Alcohol markers to color images??
Watercolor, yes (I’ll actually show that in my next video). Unfortunately, alcohol markers will smudge the ink
Great video! What do you use to clean your plates?
Actually i never do 🤷♀️ other than just a wipe with a cloth. It doesn’t affect how it works so I don’t bother. I’m a lazy crafter, lol
Perfection is overrated. TFS
So true!😂
So is this ink just toner? I saw somewhere that foiling is done with toner
Hmmm…. That’s an interesting thought- I don’t know! Might be worth experimenting!
Don't beat yourself up. We crafters always have hiccups
I just laughed!
❤❤❤
If nothing else, it made me laugh!
Lol😂 I’m glad!
Wondering why you didn't watch the original demo and emulate their modus. They stress you must 'pounce' and not grind, swipe or otherwise overdo the ink. Then there's the positioning of the yellow tape. You don't need it, if you feel more confident with it however you put it along the top, sides or bottom and only over a fraction of the edge of the paper. Of course, having the Betterpress isn't necessary, you can get the same results with the BP dies and your die cutter and plates. Or do what i've always done....use any dies that take your fancy. I've always used regular Ranger Archive mini ink pads and Distress Oxides. Now that you've tapped the Betterpress Rosetta Stone....happy letterpressing :D
The tape !!! Don't put it in the middle
Tape boven en onder , niet in het midden
Tape maak het dikker op bepaalde plaatsen
🙂
It is VERY CLEAR you did not watch any videos or take the the time to read the instructions. You do not understand the basics of stamping, light touch NOT a sledge hammer approach. Tape ALWAYS goes to the edges NOT in the middle of a project, again this is the basics of stamping. Kudos for keeping this up and showing how SIMPLE can be made difficult when you don’t learn the basics and or read the instructions.
Boy what an encouraging crafter you are.
I'm surprised the tape placement makes such a difference, can you explain why.
@@kkat54Why would you encourage someone who can not take the time to LEARN the basics and or READ INSTRUCTIONS. The FRONT of the box shows how to tape the project. The INSTRUCTIONS also show how to tape the project. The INSTRUCTIONS also state “LIGHTLY tap raised ink pad across the BetterPress Press Plate. Stamping basics 101 also tells you to tap lightly. The Misti instructions also tell you to tap lightly. There should be no encouragement for IGNORANCE.
@@pink25poppies1Taping your stamping project is very important. The way it is shown is this video is creating a “spring” which will create a blur and or have limited/excessive contact between the page and the stamp. In this case, the impression can not be made correctly because of the extra tape “bulk” that the machine is not designed to compensate for when using this tool.
@@joycegifford8826 i don't have this machine, though I do have a misti and I appreciate your information; it will likely help with my stamping skills!