One last thing for those reading this... Don't just grab wire and solder it to the cells like that... You absolutely risk the wire heating up and causing issues down the road. If you do use wire instead of the nickel plates normally used, then make sure you always use the same gauge (AWG), or larger, as the wires connecting to the battery. Do yourself a favor too and get decent cells from LGChem or Sony. The HG2 and VTC5 (or VTC6) are excellent cells for the purpose of a battery bank/speaker and have fairly high charge/discharge cycles before they lose capacity.
Awesome job with disassembly, but you really shouldn't mix cells like that. This goes double for a sealed unit that's not easy to get into. The different internal resistances and overall capacity can put more strain on the charge controller, not to mention the risk of over/undercharging one of the cells if the BMS does a poor job at balancing mismatched cells. For those of you who are going to slap another cell in, take the time to check the capacity of the existing (good) cell and the replacement. A good charger like the OPUS BT-3100 will let you check the capacity of the cells so you can match them. Ideally, make sure you bring both cells to a full charge BEFORE you install them into the speaker. This just ensures they are balanced from the get-go.
Thanks, i managed to replace the batteries with 2x18650 3.7V. They are the same as those used in my Laser 301 ! Only, the soldering was troublesome. I'm not used too. but i got it done. Now, my Anker hold the charge for a very long time... more, than 10 minutes the dead's one.
Having watched this video -- showing all the details, which is really great -- I'd say this Unit is Not User Serviceable. The website for the product says that, too, I discovered later.
Hi! My Soundcore Motion Boom has a problem that it suddenly powered off automatically within 20secs everytime I turn it on. Sound control and bluetooth still function. Could you guess which part might be failed? Now I have already torn it down…
Hello I have the same problem with my motion boom. sorry for posting it here, but even when I put the speaker on a direct power supply (without batteries) it turns off after exact 15 seconds. is it a "safety feature"? can you guess whats wrong?
Hi brother, I have replaced the battery but the speaker only turns on when the charger is plugged in and also there is no voltage for charging batteries in the circuit. Can u help pls ?
Hi! I ordered a battery, my concern is that every official battery replacement part is 7.4 Volts. Is it safe to replace the 7.4V battery with the 3.7V used in the video?
@@melas75magarang I see, it's two batteries in one case, although it came with a 2S pin connector as opposed to the 3S shown in the video. Would you recommend changing it to 3s pin?
@@melas75magarangThe speakers connection is s3 or s4 I think, so can't use the s2. My plan is to recycle the connector from the old batteries, and use the with the new one.
Have issues with the speakers, they're crackling and cutting out the speakers. Tried Google but no joy. Anyone know if they're available before I rip mine apart?
Sir.i wanna ask.can i use another brand battery 18650 like mxjo 3500 mah or sony vtc6 3000 mah.it is compatible without using ncr 18650b ? Thank you sir
I am facing a big problem.1. Speaker goes off ,if not Power plugged.Please tell a genuine solution.Also I have noticed when bass boost mode is on,maximum time speake switches off.
Yo intente reemplazar ambas baterias pero al momento de ensamblar la targetita que trae las baterías se quemo al hacer contacto con un cable que deje mal. Donde podré conseguir esa tarjeta sabrás?
Todo el buen trabajo terminó en cuánto llegaste a las baterías, cambiar solo una es un trabajo mal hecho. Jamás se puede mezclar baterías nuevas con viejas y menos recargables. Yo no te llevaría ni una portátil para reparar.
@@melas75magarang Right, but by doing so you expose yourself to a little explosion and on top of that you shorten the life of the battery... There is a reason soldering on Li Ion is prohibited... But hey, do as you desire and stay happy!
Too lazy... So I'm just gonna throw it in the landfill instead of taking the initiative to fix it. This mentality is exactly why every tech giant gives zero f***s about e-waste and laughs to the bank with your money.
@@melas75magarang Just make sure when you edit the video before you upload it as some people don't notice it until it's to late I know it's pain in the arse but if you could zoom out I little bit so we all can see exactly everything then people won't be commented on your videos like I did
Thank You so much! With your help i was able to repair my Anker soundcore boost too!
Your welcome 😊
One last thing for those reading this... Don't just grab wire and solder it to the cells like that... You absolutely risk the wire heating up and causing issues down the road. If you do use wire instead of the nickel plates normally used, then make sure you always use the same gauge (AWG), or larger, as the wires connecting to the battery.
Do yourself a favor too and get decent cells from LGChem or Sony. The HG2 and VTC5 (or VTC6) are excellent cells for the purpose of a battery bank/speaker and have fairly high charge/discharge cycles before they lose capacity.
Yes, actually I use nickel with battery welder to prevent blowing of the Battery 😀
I just did myne today, thanx for the vid, big help, i ordered battery from amazon and it was plug and play, so glad i did, i love this speaker
You Have a part number for the battery or a Amazon link?
Can you please help me with the link of battery available on Amazon?
Thanks bro. I was struggling your video helped me out,😀
It's good to hear you already do😊
Awesome job with disassembly, but you really shouldn't mix cells like that. This goes double for a sealed unit that's not easy to get into. The different internal resistances and overall capacity can put more strain on the charge controller, not to mention the risk of over/undercharging one of the cells if the BMS does a poor job at balancing mismatched cells. For those of you who are going to slap another cell in, take the time to check the capacity of the existing (good) cell and the replacement. A good charger like the OPUS BT-3100 will let you check the capacity of the cells so you can match them. Ideally, make sure you bring both cells to a full charge BEFORE you install them into the speaker. This just ensures they are balanced from the get-go.
Yes I know its better to replace both with new, less assurance 😊 i just shows that you can repair this unit😊 thanks for your concerns ❤️
Thanks, i managed to replace the batteries with 2x18650 3.7V. They are the same as those used in my Laser 301 ! Only, the soldering was troublesome. I'm not used too. but i got it done. Now, my Anker hold the charge for a very long time... more, than 10 minutes the dead's one.
Did your speaker make noise when playing music after the reassembly ? I facing this issue.
Having watched this video -- showing all the details, which is really great -- I'd say this Unit is Not User Serviceable. The website for the product says that, too, I discovered later.
Thank you very much! Good luck and health )
Very good video. I've heard some use silicone on reassembly. To seal the edge and screw holes. Any air leaks messes the base
Yes better to support silicone to prevent water
Very good.
Thanks!
Hi, can u tell me what bms is that on your battery setup and where is connected the white wire?
Dear it is originally BMS of that Speaker as I know, 2S 3amps Battery charging board
Fantástico
Молодец,хорошая работа! Герметичность сохранилась?
What type of battery is the battery bro?
Hi. Can i use battery 18650 hg2 20a?
Hi do you know if it would work without the battery and just plugged in?
Yes it is working micro USB must be connected to get power 😀
Hi! My Soundcore Motion Boom has a problem that it suddenly powered off automatically within 20secs everytime I turn it on. Sound control and bluetooth still function. Could you guess which part might be failed? Now I have already torn it down…
Hi my Dear it was Battery problem, try to replace it both 2 is better.
Hello I have the same problem with my motion boom. sorry for posting it here, but even when I put the speaker on a direct power supply (without batteries) it turns off after exact 15 seconds. is it a "safety feature"?
can you guess whats wrong?
I want to remove the front and back gril so i can see the bass
How can i ?
How about the power led blinking orange color, and it blinking very fast ?
It means battery problem
What was the symptoms you were having? My motion plus power button is just flashing white and I can't get it to do anything.
My dear why I replace the battery bcoz only 30min working after fully charged.
@@melas75magarang The power button on my speaker is blinking white. It won't work at all. Can you help?
Open up your speaker then check the battery voltage, it should bo 3.v something
@@melas75magarang Yes battery seems to be fine. And I don't see anything burned on the motherboard either.
Can you provide a retail website link (battery set) where we can order online. Thank you
SAR 7.86 49%OFF | 100% original NCR18650B 3.7V 3400mAh 18650 rechargeable lithium battery for 18650 battery + DIY nickel piece
a.aliexpress.com/_mtukUDC
I've have the same anker soundcore boost and it shuts off every minute,could the issue be the battery as well?
Anker customer care told me it’s non repairable in India. My speaker’s battery need a change. Can you please help ?
bro what is the issue? check the battery with tester if no voltage then replace it. and check for the boards if there is sign of burn
Hi brother, I have replaced the battery but the speaker only turns on when the charger is plugged in and also there is no voltage for charging batteries in the circuit. Can u help pls ?
Replace the BMS battery management system they only cost a couple of dollars
Hi! I ordered a battery, my concern is that every official battery replacement part is 7.4 Volts. Is it safe to replace the 7.4V battery with the 3.7V used in the video?
Hi my Dear the 2 batteries total Voltage is 7.4 so did you buy 2 battery or 1? However each battery has 3.7😊
@@melas75magarang I see, it's two batteries in one case, although it came with a 2S pin connector as opposed to the 3S shown in the video. Would you recommend changing it to 3s pin?
Dear no issue, however why you dont use the S2 if not diffect.
@@melas75magarangThe speakers connection is s3 or s4 I think, so can't use the s2. My plan is to recycle the connector from the old batteries, and use the with the new one.
@@Doshade ok use a new no worries
Súper 😃
I want to change my battery same dat speaker, where can I find you sir
Am here at Jeddah Saudi Arabia 😊
what kind of battery that you replace ?
My dear 18650 Lithium battery 3.7v
Amount of mah is important? Original batteries: 2x 2600 Mah. Can I use 2x3200 Mah batteries? Because I want more capasity.
Yes Dear it is better the more capacity of the MAH
@@melas75magarang Sent an e-mail to you. Can you check please?
Have issues with the speakers, they're crackling and cutting out the speakers. Tried Google but no joy. Anyone know if they're available before I rip mine apart?
Did you replace the battery or else the speak must be replace
@@melas75magarang No. Can't see why it would be a battery issue. Can you think why it could?
I have same problem, it is dead battery problem. You should change the battery. Because of low voltage.
@@cambaz4387 thanks for the info. I'll give it a go and see.
Can Soundcore Motion+ battery be replaced
Yes of course dude
@@melas75magarang Is there any link or video on how to do that, cos I don't seem to find any.
Does this procedure work for the Soundcore Pro+ as well?
Yes exactly 😊
hello bro. What battery is that?
watch the video and you will understand
18650 Lithium Battery 3.7 volt
boss baka may idea ka bakit hindi gumagana yung IQ port ng sakin?
Hi! Can i use NITECORE 18650 Li-Ion Battery 3.7V for my Anker Soundcore Pro?
Yes bro as long as 18650 but I recommend bigger capacity like 5000mah if available 😊
Se puede poner pilas ultrofite de 3,7v, 6800mah
Dear Lithium Bat. 18650 3.7V any MAh you can use.
Sir.i wanna ask.can i use another brand battery 18650 like mxjo 3500 mah or sony vtc6 3000 mah.it is compatible without using ncr 18650b ? Thank you sir
You must use lithium battery with the same size and better the higher capacity like 5000mah x2
@@melas75magarang Sir..whats the diffrent 18650 and 18650B ...can i use 18650 .. For example nitecore NL 1835 type 18650 3500mah.
@@andrykingkong6322 dear 18650 is little smaller than 18650b and you can use it
yes and also you can use the 18650b very small difference in size
I am facing a big problem.1. Speaker goes off ,if not Power plugged.Please tell a genuine solution.Also I have noticed when bass boost mode is on,maximum time speake switches off.
My friend that was battery problem, replace it it will be fine. 😊
No it works fine,but if I increase the volume or turn on bass mode,it goes off,where can I find the battery?
@@manusudan5667 you can buy on AliExpress or in Ebay, Amazon as well
Yo intente reemplazar ambas baterias pero al momento de ensamblar la targetita que trae las baterías se quemo al hacer contacto con un cable que deje mal. Donde podré conseguir esa tarjeta sabrás?
Nag aaccept ka ng repair boss? :D
pde po basta Jeddah lng😊
@@melas75magarang ay layo pala hahahaha di kasi ako marunong mag solder ng battery. thanks po
Boss,pwede pagawa ko nlng sayo?meron ako nito,nakatambay nlng..
wlang problm basta sa Jeddah ka😊
The best battery na pinalit ko sa soundcore boost ko yung panasonic Japan NCR18650B 3400mah
Bro anong battery pinalit mo? Available ba yan d2 sa pinas?
Opo sa Lazada meron yan
@@melas75magarang anong pangalan ng battery bro?
@@markleesablon3257 basta 18650 lithium Battery 3.7 volt
@@melas75magarang last nlng bro pointed ba or flathead yung oorderen?
@@markleesablon3257 flathead po pro may polarity nmn un +at -
Pwede pagawa sayo? Ano po number niyo?
opo basta dito lng Jeddah😊
Todo el buen trabajo terminó en cuánto llegaste a las baterías, cambiar solo una es un trabajo mal hecho.
Jamás se puede mezclar baterías nuevas con viejas y menos recargables.
Yo no te llevaría ni una portátil para reparar.
Yes bro it's true better to replace both 2 batteries, but this is only a demo on how to check and replace died battery 😊
I don't recommend this procedure; there are spot-welders for this task.
Yes you can use spot welder if you have that tools, for me I use Soldering gun to any Bat. Terminals
@@melas75magarang Right, but by doing so you expose yourself to a little explosion and on top of that you shorten the life of the battery... There is a reason soldering on Li Ion is prohibited... But hey, do as you desire and stay happy!
@@A.Dude. yes right its not recommended to use Soldering gun😊 somehow that time I don't have welder.
Jesus it's a whole operation to replace the battery, I just Buy a New one it's not that expensive
Too lazy... So I'm just gonna throw it in the landfill instead of taking the initiative to fix it. This mentality is exactly why every tech giant gives zero f***s about e-waste and laughs to the bank with your money.
You need to stop moving out of the camera view and place the camera in a better angle as you are pissjng me off
😊Sorry brad
@@melas75magarang Just make sure when you edit the video before you upload it as some people don't notice it until it's to late I know it's pain in the arse but if you could zoom out I little bit so we all can see exactly everything then people won't be commented on your videos like I did