Adjusting AGT Vixen Hammer Spring

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 18

  • @simonbon100
    @simonbon100 ปีที่แล้ว +1

    Hi...thank you for the 2 videos on the vixen. i just got my long version in 5,5 today. Do you know if there is a restrictor installed that needs to be removed to increase power? i have not touched the gun yet...not even filled with air. waiting for chrono to arrive before touching anything.

    • @75echo
      @75echo  ปีที่แล้ว

      Impossible to say mate but if it is not a FAC version then i am almost sure that the restrictor is there.

    • @ionutvercocilenco7873
      @ionutvercocilenco7873 5 หลายเดือนก่อน

      Yes it is.. in the left side of the gun, close to the magazine you find a 4mm Allen that need to be pulled out, than you find a small brass cylinder. Took it of end put the small Allen in place...you will be satisfied 🎉🎉

    • @PCP_HUNTER_UK
      @PCP_HUNTER_UK หลายเดือนก่อน

      ​@@ionutvercocilenco7873what sort ov power gain would i see if removed

  • @robertos.archery
    @robertos.archery 7 หลายเดือนก่อน

    Its a great video but, its not clear to me when you say about turn back 3 or 5%. How can I get this account? Do you mean I loose the hammer regulator 100%, and then, tight it counting each loop, and twist it back 3 or 5 % of the amount loops done, is it?
    If I get 10 loops, 1 loop back its equal 10%, so, I need back 1/2 loop?

  • @simonspain6080
    @simonspain6080 ปีที่แล้ว

    ...did you tell us the reg pressure now???

    • @75echo
      @75echo  ปีที่แล้ว +2

      regulator set pressure was raised from 100 to 115 bar.

  • @crazycressy7986
    @crazycressy7986 9 หลายเดือนก่อน

    How is the Vixen holding up ,thinking of getting one ,but just read there has been problems with them ?

    • @75echo
      @75echo  8 หลายเดือนก่อน

      My honest repy? do not buy it. Get the Uragan or Vulcan 3 instead

    • @crazycressy7986
      @crazycressy7986 8 หลายเดือนก่อน

      @@75echo I don't like half tactical and half normal looking rifles ,got to be one or the other

  • @derekwngreen
    @derekwngreen ปีที่แล้ว

    What fpnds is it running at?

    • @75echo
      @75echo  ปีที่แล้ว

      826 fps gives great stability and acuract with JSB 16 grain pellets.

  • @AnhThắngNguyễn-e3g
    @AnhThắngNguyễn-e3g ปีที่แล้ว +1

    Helo

  • @BernhardBB
    @BernhardBB ปีที่แล้ว

    Hold da helt op..det var lidt af et tryk nu..god justering..

  • @AnhThắngNguyễn-e3g
    @AnhThắngNguyễn-e3g ปีที่แล้ว +1

    Helo