Very interesting, and appropriate for a problem we are attempting to solve at present. The one point that was not discussed is if the load is less than half the installed Solar panel capacity, and this load is also variable in that it can be reduced to suit the output of the solar panels, then a low kw generator solution would work. Even if the generator occasionally trips, not having to run a large generator at 30% will result in significant saving on fuel. This scenario would work less well during the monsoon months! Thank you for making this video!
Hello Raman...I am seeing your work for the first time...I didn't know you have a youtube channel ....it is so impressive that you've reached such professional levels in your carrier....your parents must be really proud of you .....a round of applause from my side 👏👏
Thank you so much, Brother. You have explained it very well. But I have a question in mind can we install a zero export device in place of the PV-GEN set when we turn ON the on-grid inverter with DG. As we install Zero export device then no Power will go towards DG.Can we do this thing?
@@solarfacts4242 not for DG?? because when our Generator turns on the Inverter Considers its reference and Starts its production as the inverter does not know the difference between Grid and DG?? Kindly give me a clear answer about this thing?? It's a humble request from my side
Thanks for the vedio, I have installed Solar in my Flat which is on Top Floor of the society, I have 3-Phase supply which is coming via Grid and society DG set via a Dual meter. Please let us know how can I use the Net meter in this case and shall I need to install DGPV
Thank you for your educational video. Request you to make a video on SOLAR - DG- BATTERY BANK (LIFEPO4) Hybrid system. It will be better if you integrate windmill system also . Thank you .
I don’t know dgpv synchroniser, but there is 1 more technique. Called zero export feature, that’s it, that’s sufficient, let dg run at 30% come what may & after that let solar start producing, since it is sync w this new ref (dg) it will pump power to load & letting dg to not to raise its delivery, as solar start under performing, means it will not be able to cater the load abv 30%, so in that naturally dg will start pumping power to load till it’s 100%, & as solar starts gaining its capacity, it will start pumping in to the load & thence dg will start derating its capacity. Just remember after start of dg, on grid fail, we r simply maintaining the lower limit of its operation to 30%, and sw on zero export feature of solar. Rest is taken care, adaptively.
Helo Raman, thanks for the video. I have one question, in this case we have to install Zero export meter also to avoid the export when grid is not available. Please correct me
I am installing 3kw on-grid system in my apartment with zero export CT. In the basement we have a big DG which powers all flats (total 30) including common area and Lift. Mine is a single phase, do you propose DG PV system or should I disconnect the DG ? My electrician was telling he would pull a separate line for a kitchen point from DG (post DG disconnection in the basement to my flat) will it be feasible as I am not sure how on-grid inverter would react since it will be connected to my Mains. Please help.
Why make it complicated? Why can't the inverter cut grid during power out and run by itself.. Generation on shinewave is not so hard If it still needs reference..
प्रिय मैं आपका बहुत बहुत धन्यवाद दिल से करना चाहता हू ,खूबसूरत कॉन्सेप्ट
Thank you sir
thankyou so much sir for explaining in wonder full ways it is vary help full for me
Very very informative and rare topic. I was needing this information as am going to make DPR for 250 KWp on grid plant.
Thank you very much.
Very nice 👍 excellent explained pv Dg video need.....ok.sir
Beautiful guide line sir👌🏽👌🏽
Glad you liked it
I have been longing to understand DG sync in detail in hindi. Thanks a lot Raman bhai. Masha Allah nice work. Keep us technically energised.
Thank you
Very interesting, and appropriate for a problem we are attempting to solve at present. The one point that was not discussed is if the load is less than half the installed Solar panel capacity, and this load is also variable in that it can be reduced to suit the output of the solar panels, then a low kw generator solution would work. Even if the generator occasionally trips, not having to run a large generator at 30% will result in significant saving on fuel. This scenario would work less well during the monsoon months! Thank you for making this video!
Hello Raman...I am seeing your work for the first time...I didn't know you have a youtube channel ....it is so impressive that you've reached such professional levels in your carrier....your parents must be really proud of you .....a round of applause from my side 👏👏
Thanks you 🙏🏻
May I know from where you are ?
@@solarfacts4242 We are from Kanpur....we are neighbours in Tirwa ...Seema and family
Thank you Mousi 🙏🏻
Excellent explanation. Keep it up
Good work Raman as always. Pardeep from Apex Solar Jaitu Punjab
Thank you
Great lecturer
thank you
Good concept explanation in very easy way...👍
Thank you 😊
Thanks Raman ji, your video content is excellent and informative. Nicely explained too 👍
Thank you so much 😊
Hi how are you my dear friend I am Asad iqbal from Pakistan I have solar installer. Nice information for me
Excellent! Yes please do make a video on the DGPV Synchronisation box. Thanks
Great knowledge sir❤
Plese make vidio of actual connection Thank You
Excellent presentation, very well explained in detail 😊
Glad it was helpful!
Knowledgeable content 👍
Thank you 😊
Very informative indeed, keep doing 👍👍
Thanks 🙏🏻
Good information
very well explained
Thank you 😊
Great Job!!
Good explanation ❤
Nice explanation sir,
Ek or video Synchronisation device pe agar bataye jiski help se design kr Pau.
Ok sure
Thank you so much, Brother. You have explained it very well. But I have a question in mind can we install a zero export device in place of the PV-GEN set when we turn ON the on-grid inverter with DG.
As we install Zero export device then no Power will go towards DG.Can we do this thing?
Zero export only insure that the power flow should not be to the grid
@@solarfacts4242 not for DG?? because when our Generator turns on the Inverter Considers its reference and Starts its production as the inverter does not know the difference between Grid and DG??
Kindly give me a clear answer about this thing??
It's a humble request from my side
Sir very good information give me zero xport divice installation please share with me
ok will do
Thank you. It's a beautiful video. Any ball park cost for a DG Synchronization for 100 KW system.
Make a video on mathematical models of control of inverter
Thanks for the vedio, I have installed Solar in my Flat which is on Top Floor of the society, I have 3-Phase supply which is coming via Grid and society DG set via a Dual meter. Please let us know how can I use the Net meter in this case and shall I need to install DGPV
You can do net metering if you are getting supply from the grid and in this case your solar connection should be separate from the DG
Bhai.....banado dg-pv connection pe video🙏
Ok sure
Thank you for your educational video. Request you to make a video on SOLAR - DG- BATTERY BANK (LIFEPO4) Hybrid system. It will be better if you integrate windmill system also . Thank you .
I don’t know dgpv synchroniser, but there is 1 more technique. Called zero export feature, that’s it, that’s sufficient, let dg run at 30% come what may & after that let solar start producing, since it is sync w this new ref (dg) it will pump power to load & letting dg to not to raise its delivery, as solar start under performing, means it will not be able to cater the load abv 30%, so in that naturally dg will start pumping power to load till it’s 100%, & as solar starts gaining its capacity, it will start pumping in to the load & thence dg will start derating its capacity. Just remember after start of dg, on grid fail, we r simply maintaining the lower limit of its operation to 30%, and sw on zero export feature of solar. Rest is taken care, adaptively.
Could you please make a programme on installation procedure of dgpv synchornisation
Inverter ke components and circuit diagram ke uper video chahiye sir
ok give me some time i will make one video on it
Can we use ups instead of dg for reference in case of load shedding?
DG PV plant ka Synchronisation connections ka video banaye sir, please
Sure sir
Bahut jaldi i will make video on it
Helo Raman, thanks for the video. I have one question, in this case we have to install Zero export meter also to avoid the export when grid is not available. Please correct me
No sir we will only generate the power which is required to run the load
So extra power will not be generated, and export will not happen
Minimum dg 30% load rakhna necessary hai kya, ya kam bhi rakh sakte hai
Home Invertor se refrance volt de ke solar Invertor ko kaise chla sakte hai
Already there is a video please check my channel
Hello sir, you are talking about refrence voltage so how reference voltage require for particular on grid inverter?
because if grid is not available we can not export the power
that's why reference voltage is required
Tnx u sir
Thanks
please make a video dgpv synchronization
ok
I am installing 3kw on-grid system in my apartment with zero export CT. In the basement we have a big DG which powers all flats (total 30) including common area and Lift. Mine is a single phase, do you propose DG PV system or should I disconnect the DG ? My electrician was telling he would pull a separate line for a kitchen point from DG (post DG disconnection in the basement to my flat) will it be feasible as I am not sure how on-grid inverter would react since it will be connected to my Mains. Please help.
If you are not doing DG synchronisation please keep solar separate
Please make video on DGPV synchronisation box also .
Ok sure
Please make vedio on dg box and switch gear.
Agar hame Backup ke liye Battery bhi laga den toh kaise karenge in case of ZERO EXPORT system
❤❤
A SIR, Kindly make a vedio on DG PV sychronius Box we are waiting
ok Sure
Agar DG line pr zero device lga le tu kya phir be DGPV ki zrort ho ge ?must replay
Apne ye nhi bataya ki solar powe ko DG me export hone se kaise bachayenge
Bahi ager solar panels ke cable ke sath main power 440 ke cable chalay to koi problem Hoti hai
no
but there should be a gap required as per current
what is the use of grid in this case
How can DGPV system work in cold storage solar system? Is it advisable or not?
What about PF correction at DG & PV load sharing at high/varying power demands?
I will make one video on it
@@solarfacts4242if video is uploaded, please share link
if the load is 20 kw suppose for whole day then will it effect diesel generator life ?
That will affect in long term
Reverse current found in inverters due to DG , what is the reason
Sir meri site 1mw par MFM, DG par lga h or usse hi sync ho jata h . DGPV kyo
Yes
I have one doubt. What if DG is higher and Solar plant is lower in size? Eg. 200kv DG and 20KW solar
In this my solar will start when after 60 Kw load
Bahi 2 inverter ko parallel Kyu karty hai?
If the load is itself very low that is nearly 15% of Diesel generator then what? DG set will start to deteriorate or get itself damage?
Then there is no point to connect DGPV sync.
@@its_amir There is no grid so DGPV always working in parallel .
That will affect in long term
Pla send dc voltage drop calculation excel file ..
Sure will make a video
Icelanding nahi ilanding spell as islanding
Why make it complicated? Why can't the inverter cut grid during power out and run by itself.. Generation on shinewave is not so hard If it still needs reference..
Because these inverters having anti-islanding feature
Bye bye
Please give your contact number,
I want to install 150kw system for my cold storage in barabanki uttar pradesh
Please give your contact number,
I want to install 150kw system for my cold storage in barabanki uttar pradesh