Sir, with my calculation. If input voltage is Vin=5V, pulse width 70% (D=0.7), the output must be Vout = Vin/(1-D) = 16.6V . In your simulation it is 31V! Thank you for your simulation.
While working with components in Proteus, make sure that there is some simulation model of the component, otherwise it will cause an error which happened in this video too.
@@nelsondarwinpaktech3954 No it's not. The addition of C1 was not necessary. C2 is enough. BTW, thank you very much, you helped me find the right components.
just a simple boost to boost converter...u can make low dc voltage to a high dc voltage with this circuit...input low dc and at output high dc....thanx
Sir, with my calculation. If input voltage is Vin=5V, pulse width 70% (D=0.7), the output must be Vout = Vin/(1-D) = 16.6V . In your simulation it is 31V! Thank you for your simulation.
i got warning message that said: time step too small. what to do?
🙏💓nice teach sirji 💓🙏
I have real time simulation error. How to solve it?
how to make 5-12v input voltage to 15v output voltage. the input voltage source vary as I wrote.
can i get more voltage on the output?
raihan...u can get by chaning the value of inductor...
While working with components in Proteus, make sure that there is some simulation model of the component, otherwise it will cause an error which happened in this video too.
ok noted sir
Tq sir❤
thanks for visiting the channel......
I got output less than the input voltage. I got it 4.10 V
brother...output will always low than the input...efficiency cant be 100%.
@@nelsondarwinpaktech3954 No it's not. The addition of C1 was not necessary. C2 is enough. BTW, thank you very much, you helped me find the right components.
@@Mohammed-bd7ql I GET 4.10v in the output too ???
@@magnet_ Remove C1 and follow your design calculations to get the right values don't just place arbitrary numbers.
working plzzz
anyone plz tell me the working of this simulation
just a simple boost to boost converter...u can make low dc voltage to a high dc voltage with this circuit...input low dc and at output high dc....thanx