วีดีโอ

Push Button Circuit using Proteus Software

please share the code with hex file

what is the purpose of MR it is not used by you

Is it python ide support usb webcam and microphone phone system webcam is not support can I use usb webcam insist?

Can you provide the design calculations

if i want one output only equal 1 and the others equal 0 ..what shoud i do ?

💩💩💩💩💩💩💩

Thanks it helped a lot

PWM frequency is more than enough to monitor proteus. You should keep it at a value 490Hz

Thank you very much!!

i am from bangladesh. can you please send me the code?

Hey dude, its possible to export el this file to TIA portal?

Good

The only working h bridge on youtube . Thanks

Thanks!!!

very helpful yipiee !!!!😀😀😀

#include<TFT_eSPI.h> #include <SPI.h> #include <Wire.h> #include<Adafruit_FT6206.h> Adafruit_FT6206 ctp_0 = Adafruit_FT6206(); #define tft_cs 15 #define tft_dc 2 #define tft_mosi 23 #define tft_sclk 18 TFT_eSPI tft = TFT_eSPI(); void setup() { // put your setup code here, to run once: Serial.begin(115200); tft.begin(); if(!ctp_0.begin(40)){ while(1); } tft.fillScreen(ILI9341_BLACK); } void loop() { // put your main code here, to run repeatedly: khungdht22(); if(!ctp_0.touched()){ delay(10); return; } TS_Point p = ctp_0.getPoint(); p.x = map(p.x,0,240,240,0); p.y = map(p.y,0,320,320,0); Serial.print("("); Serial.print(p.x); Serial.print(","); Serial.print(p.y); Serial.print(")"); Serial.println(""); delay(100); // this speeds up the simulation } void khungdht22(){ // Display date and time with blue frame int dateTextHeight = 2; int timeTextHeight = 2; int lineSpacing = 10; // Space between lines int framePadding = 2; // Padding around the text int frameWidth = tft.width() - 2 * framePadding; int frameHeight = (dateTextHeight * 3 + timeTextHeight * 2 + lineSpacing * 2) + 60; int frameX = framePadding; int frameY = 125; tft.drawRect(frameX, frameY, frameWidth, frameHeight,ILI9341_WHITE); // Draw the frame int middleX = frameX + frameWidth / 2; // Tính toán tọa độ x của đường thẳng tft.drawLine(middleX, frameY, middleX, frameY + frameHeight, ILI9341_WHITE); // Vẽ đường thẳng từ trên cùng đến dưới cùng của khung } sir, I upload the code above, and connect LED pin of the screen to the 3.3V pin of ESP32, and the screen didnt show the frame by function khungdht22(), can you help me, please?

THIS IS VERY HELPFULL YIPPIEE !

Can you plz provide the code

pls the file is empty send to us

You made it easy, Thank you

which NuGet packages does this use?

When i connect two resistors, only dotted line is coming, not sloid wires What to do

When I'm trying to place components, the place option is not showing, what to do?

Hi dear, is possiblie you availible this lib to download, pls.

Wish these were available in one chip

Can you please send me library ?🙏

thank u sir lub u bro JazakAllah brotha from anotha motha

Thank you. This helped me.

can u share this project link?

Hello! can you make it a real time clock

I'm given the power rating of the resistor i'm supposed to mount on my proteus setup. Should I take the power rating value into consideration?...If yes....how can I add it on the resistor ?

didn't work

it says that there is no library called keypad.h

thank uu

how do i change it's position?

Pin 8 and 16 are not present, This is bit crazy

It's been 3 yr now. When are you gonna upload the seond part?

Where is the second part?

Sir please reply 🙏 😢 help me to do the simulation for project rc coupled amplifier using proteus software from circuit diagram 😢😢 i need your help sir 🙏 i tried but many confusion are there and very problematic 😢

Nice project dude! thanks a bunch!

thanks about this video i hope next you explain how connect decoder output to 7 segment 2 type common anode -cathod

thx bro a lot of help from this video

Thank you

Hey mate! can you open the file for us?

Sir my project name is Fingerprint based biometric attendance system & in proteus Arduino Uno, R307 fingerprint sensor, DS3231 RTC, and solenoid lock all components library not available that's why I don't know how to make simulation ckt. For my project can u plz provide all this components library plz sir it's really imp for me & I don't have much time 😢😢😢

How can i adjust the font size of the waves?

good ideal, thanks

Thank you

Harikasın