There actually is no tune needed for this, I took it to my tuner to make sure but ended up not needing one! Should gain about 10hp without porting and around 15 if you port it
I’m not sure, I took mine off and haven’t put it back on and have no issues! But I know some people have modified it and reinstalled it. Hope this helps!👍🏻
No tune required as there isn’t much of a change in the air to fuel ratio! I didn’t get any check engine light on mine I don’t believe, either that or it will go away once the sensor adjusts
I would say yes, but there is no tune necessary so if you ever needed to take it to the dealership you could swap it back to stock and they would never know! Hope this helps😎✊🏼
Have you tuned it yet? Curious what you gained? I just bought mine gonna modify it myself to make it fit like you. After drilling in for the brake booster did you have to rinse it out again or just leave it?
I took it to my tuner again, but he said it wasn’t necessary as there wasn’t a major air to fuel ratio difference, I did rinse it out after and let it completely dry before installing, any little drops will just get evaporated as well so don’t worry too much about a little water
very helpful build... enjoy not hearing any complaints about factory parts or not giving bitter opinions.
Thank you for the feedback and supporting the channel! I’m glad you liked the video!
Was there any gains without the tune?
There actually is no tune needed for this, I took it to my tuner to make sure but ended up not needing one! Should gain about 10hp without porting and around 15 if you port it
@@MoatMotorsMedia thanks for your reply, im doing something to my car and your videos helps alot, thank you!
@@caracheojesus awesome! Glad I can help you out and thank you for the support!
I torqued mine to 7.5ft lbs. Basically 89 inch lbs. Im curious what the tune did. Mine was silly without a tune, curious if the tune would help much
I took it to my tuner but he said there was no tune necessary as there wasn’t any difference in the fuel to air ratio ✊🏼
What exactly did you use to tap In that thread In the back for the brake booster ?
Thanks
Any difference with the foam piece of ?
I’m not sure, I took mine off and haven’t put it back on and have no issues! But I know some people have modified it and reinstalled it. Hope this helps!👍🏻
Curious if you can hear the fuel pump. I modified mie and cant hear the fuel pump
Does the lt2 manifold required a tune when you install for a check engine light ?
No tune required as there isn’t much of a change in the air to fuel ratio! I didn’t get any check engine light on mine I don’t believe, either that or it will go away once the sensor adjusts
Did you have to modify the foam piece under it?
I just removed it completely, it wasn’t until after that I saw people were keeping it and just modifying it so I might do the same I’m not sure
Will this mod void my warranty?
I would say yes, but there is no tune necessary so if you ever needed to take it to the dealership you could swap it back to stock and they would never know! Hope this helps😎✊🏼
@@MoatMotorsMedia actually that may work. Thanks for the input bro. 👍
@@thynysan no problem! Thanks for watching the video 😎
Did you notice a difference?
I haven’t driven it yet, but I plan on doing a review on it once I’m able to get it tuned!
I noticed a difference in mine, also after a few heat cycles the manifold needs to be re-torqued down.
Have you tuned it yet? Curious what you gained? I just bought mine gonna modify it myself to make it fit like you. After drilling in for the brake booster did you have to rinse it out again or just leave it?
I took it to my tuner again, but he said it wasn’t necessary as there wasn’t a major air to fuel ratio difference, I did rinse it out after and let it completely dry before installing, any little drops will just get evaporated as well so don’t worry too much about a little water
Good job but doing all that drilling you get plastic debris in the intake and that probably went in you engine.
💯👍🔥