Omg I have 2006 crv tried all the videos! found this video followed the written steps in the beginning dint even watch the video and bingo it worked ! Thanks so much! The trick is the headlights turn them off!
Glad it helped! Hope you're having some happy holidays and it's not too 2020-ish, shooting you some good vibes! Thanks for watching and for the kickads comment
to do the guage test on 2015-present Honda Cr-v the Ex and above trims with pushbutton ignition in addition to the lights you have to first turn the headlights on, hold down the trip button, without pressing the brake pedal press the start/stop button two times to get it to the on position and turn the lights off-on-off release the trip button then press 3 times and the guages should self test. im sure it work on accords and other honda models with the pushbutton ignition on 2015-current models.
i did this now on my honda crv 2008 2.4 but the light of the abs, esp, cruice control, and others they don't light, also on the left corner down there's a light that says light control. on the screen it says error 1, what does this mean? how can i fix it?
My 2010 Crv Honda air condition not working I have checked all fuses their ok and gas too ok , but if I on the ac switch the ac clutch is working but if I do activation test on my scan tool you will see the is working, I do auto scan but I only find b1008 , but I want to know can this faults code causes Ac not working at the same time the remote too not working help me to solve this issue
I have a 2007 honda CRV with a non working gas gauge. It always showing 3/4 full while filling up with gas. I see yours is 398 miles before empty. What is the number of miles when you 100 % fill up with gas? In this way ill just rely on my trip meter.
Error 1 means "F CAN communication". There is a high speed communication bus and the Gauge Control Module thinks there is something wrong, it cant talk to the PCM or the ABS Modulator or something. That is going to be a tough putt for a layman to work out.
Error 1 means "F CAN communication". The Gauge Control Module is having trouble talking to another module on the CAN network, PCM, ABS, SRS or TPMS. What's the issue?
@@PokuzFoint1982 that would be a pretty unusual failure for an F-CAN system. I think I would move on, check the seat belt switch, see if the seat belt shows buckled and unbuckled in the SRS data.
@@CARtastrophe365 and also when im driving sometimes the battery lights is on and off the mechanic says the alternator is ok and charging.dont know whats the reason
If you have a gauge issue, like a tachometer that does not work. Is it a network issue? PCM not sending engine speed? Crank sensor? Or gauge? If you do a self test and the tach still does nothing then you know it's a gauge issue.
I believe it does test the LCD segments, if they are flickering the Gauge Control Module has likely failed man, kinda typical. Good luck! Thanks for the comment!
My mom's instrument cluster was all jacked up on the LCD screen. We ordered a new one. It's easy to install u remove the trim where it goes and then remove 3 screws. Two on the side one up top. Then pull out unplug and plug the other in. 100 bucks on eBay for a used one
Omg I have 2006 crv tried all the videos! found this video followed the written steps in the beginning dint even watch the video and bingo it worked ! Thanks so much!
The trick is the headlights turn them off!
Glad it helped! Hope you're having some happy holidays and it's not too 2020-ish, shooting you some good vibes! Thanks for watching and for the kickads comment
to do the guage test on 2015-present Honda Cr-v the Ex and above trims with pushbutton ignition in addition to the lights you have to first turn the headlights on, hold down the trip button, without pressing the brake pedal press the start/stop button two times to get it to the on position and turn the lights off-on-off release the trip button then press 3 times and the guages should self test. im sure it work on accords and other honda models with the pushbutton ignition on 2015-current models.
Good man, thank you!
i did this now on my honda crv 2008 2.4 but the light of the abs, esp, cruice control, and others they don't light, also on the left corner down there's a light that says light control. on the screen it says error 1, what does this mean? how can i fix it?
Hello, i have a 2008 crv. Its mileage odometer is in miles. How can i switch it to kms?
I have the same question
Sir I have HONDA CRV 2011 MODEL AND AIRBAG SIGNAL KEEPS SHOWING WHILE DRIVING ALSO.. PLEASE TELL HOW TO DEACTIVATE THIS SIGN...
Yes! Worked on my 2006 Honda CRV! Thank you.
My 2010 Crv Honda air condition not working I have checked all fuses their ok and gas too ok , but if I on the ac switch the ac clutch is working but if I do activation test on my scan tool you will see the is working, I do auto scan but I only find b1008 , but I want to know can this faults code causes Ac not working at the same time the remote too not working help me to solve this issue
I have a 2007 honda CRV with a non working gas gauge. It always showing 3/4 full while filling up with gas. I see yours is 398 miles before empty. What is the number of miles when you 100 % fill up with gas? In this way ill just rely on my trip meter.
i already do this on my honda hrv and it says error 2.how to fix it
I just did mine and it says error 1 did you figure a solution for this??????
robguerr1988 same 2010 crosstour
Can anyone exsplane what error one means
Error 1 means "F CAN communication". There is a high speed communication bus and the Gauge Control Module thinks there is something wrong, it cant talk to the PCM or the ABS Modulator or something. That is going to be a tough putt for a layman to work out.
@@CARtastrophe365 thanks pal
@@CARtastrophe365 is it a job for a auto electrician
My Honda CR-V 2010 headlight stay on, you think a can fix by this way ?
Finally! A straight answer. Thank you very much.
Error 1 what mean? Im using honda CRV 2009
Error 1 means "F CAN communication". The Gauge Control Module is having trouble talking to another module on the CAN network, PCM, ABS, SRS or TPMS. What's the issue?
My seatbelt light not coming on when i start my engine
@@PokuzFoint1982 that would be a pretty unusual failure for an F-CAN system. I think I would move on, check the seat belt switch, see if the seat belt shows buckled and unbuckled in the SRS data.
@@CARtastrophe365 do i need to scan my crv?
@@CARtastrophe365 and also when im driving sometimes the battery lights is on and off the mechanic says the alternator is ok and charging.dont know whats the reason
Can you reset it with this
Not sure what you are trying to reset, I would say no, this does not reset anything.
@@CARtastrophe365 will it show error in the system
@@timothyslater4347 yep, there are error messages in the odo display
@@CARtastrophe365 thank you for replying to my question
2007 crv.. Tried it 20 times.. Nothing
How you do it on 2010 mdx
Same way, but use the SEL/RESET button on the steering wheel instead of the Trip button. Good luck!
Car Guys thank you I did it
For what is this ?
If you have a gauge issue, like a tachometer that does not work. Is it a network issue? PCM not sending engine speed? Crank sensor? Or gauge? If you do a self test and the tach still does nothing then you know it's a gauge issue.
Does this work for the fuel gauge indicator?
Does this test the LCD screen as well ? Cos mine is playing up bits missing and
flickering ext. ?
Thanks good video 👍
I believe it does test the LCD segments, if they are flickering the Gauge Control Module has likely failed man, kinda typical. Good luck! Thanks for the comment!
My mom's instrument cluster was all jacked up on the LCD screen. We ordered a new one. It's easy to install u remove the trim where it goes and then remove 3 screws. Two on the side one up top. Then pull out unplug and plug the other in. 100 bucks on eBay for a used one
What do this?
Do you mean why? Just to make sure the gauges and lights all work
I did this on my grandma’s car. She has a 2012 model.
Good to know! Glad they are keeping that functionality going in the newer models!
Thank you it really works perfectly I really appreciate.🙏
Worked like a charm
Glad to hear!
Good job..
Thanks
Nailed It !!!.. :D and I didn't even use a Hammer (this time!) :D
Hah!
You mean the fine tuning adjustment tool?
Fantastic thanks
Yayy..it works..thanks
Christmas lights 💡🌈💡🌈