Another great video very informative i took a lot of notes and have learned a lot im new to the no prep scene, im going to have to try this esc set up love the tuning capability's what motor an Turn would you recommend for this system would the Bandit 13.5 be a good choice ?
I have a dr10 with a v10 4.5t motor with a 81t 48p spur with 24t pionon and I feel that it's the best set up that you can have or at least in my opinion
Hi I seem to be unable to active my turbo and boost timing,even at 30 deg delay 1 sec full throttle 132ft the car slow still,can u guide me on this.i have xr8 plus g2s..I'm running on 2s lipohv and 2.5t trinity drag master..
@@HOBBYWINGOfficial thanks for the reply 🙏 I just purchased the Ezrun Combo MAX10 Series (Combo: MAX10 SCT-B, Motor Type: 3660SL 4000KV) And i am going to use it on a hpi wr8 flux ken block edition for speed runs its got a 46t spur gear what pinion do you recommend?
Very cool video! Thanks for making this helpful channel! HobbyWing Rocks!
Excellent. First video I completely understood. Thanks so much for the video
Hi thanks for this Drag Race Video i hope it comes More
Great video ! Thanks for the info. Ready to try this out on the Serpent GT cars
I'm good with your non-scientific testing methods...Many thanks Charlie!
Vary helpful and super informative!! Thank you for breaking everything down for dummies like me lol
Hi nice video, do u have any videos on setting up that futaba radio for drag racing..ramps etc. Anything drag racing when using the 7px etc.
it all depends on the Poles definitely not a blanket statement - Small Pinion Big Spur for 2 pole / Big Pinion, Small Spur for 4 pole High KV... 🏁🤙🏽💯
Thank you for the information very interesting
Charlie! XR10 ESC can use 3.5T HobbyWing motor without burning it?
Setup "correctly" and used "correctly", it's possible. There are never simple answers for Q's like that though. Far to many variables.
super helpful thank you!
Big time help thanks
im going to be purchasing the HW xr10 pro g2 elite...can that run a 4.5t motor just fine?
I’m new to the sport and your video really helped. Thank you
What hobbywing esc is best for drag set ups. With what motor options?
Where do you get the WiFi thang from
Another great video very informative i took a lot of notes and have learned a lot im new to the no prep scene, im going to have to try this esc set up love the tuning capability's what motor an Turn would you recommend for this system would the Bandit 13.5 be a good choice ?
We usually recommend starting around 5.5 - 6.5 turn motors. Most of the "serious" racer groups are running lower turns than that. ;)
no
Any timing options coming for the 8th scale escs for drag?
There are always things in the works, but the current setup is usable. High RPM ranges are similar to using Turbo.
@@HOBBYWINGOfficial It's usable...but maxing out at 20 degrees of timing...I am getting beat on the big end by guys who have those options.
Hello, after you make parameter changes is it necessary to re calibrate the esc. Thanks
What happen with the turbo if I set my controller at 90 percent??
I remember cranking the timing up to 60° on a 17.5t Stock motor..
it was screaming like hell..
Can i do that with the lcd card?
Any news on when data logging graphs will be added?
Not at this time.
Could you run both of them together or is it best just to use one or the other cuz I got my Boost setting at 2500 to 65000
I have a dr10 with a v10 4.5t motor with a 81t 48p spur with 24t pionon and I feel that it's the best set up that you can have or at least in my opinion
Hi I seem to be unable to active my turbo and boost timing,even at 30 deg delay 1 sec full throttle 132ft the car slow still,can u guide me on this.i have xr8 plus g2s..I'm running on 2s lipohv and 2.5t trinity drag master..
We replied to your email as well. Thank you.
The XR8 Series only allows "turbo/boost" when used with Hobbywing E8th scale motors.
Can turbo work on a sensorless motor?
Can you help with a setup for a TLR 8ight xe and an xte? both are 1/8
Feel free to email us with your setup details and we'd be glad to help - NorthAmerica@hobbywing.com
How did you turn off the fan, mine runs constantly 😳
unplug it
What esc does the app work with? The QR10 bl120?
no
Will this esc run 4 pole 6400kv motor ?
NorthAmerica@hobbywing.com can assist with Tech Support directly! Thanks!
Hello nice video!
Dose this go only for the specific motor in the video or all hobbywing motors?
When will the wifi express be available again?
This is just a simple example to show how the features function.
Very soon/any day now.
@@HOBBYWINGOfficial thanks for the reply 🙏
I just purchased the Ezrun Combo MAX10 Series (Combo: MAX10 SCT-B, Motor Type: 3660SL 4000KV)
And i am going to use it on a hpi wr8 flux ken block edition for speed runs its got a 46t spur gear what pinion do you recommend?
@@vasilisfellouzis It is always best to start out with a small pinion to be safe. 12-13T type of thing.
could you do that with a sensorless motor, with that esc? i want that esc now..
you want sensored
Nice video but it seems I'm always landing on these RC car videos when I'm actually looking for drag racing real racing
Rc world has gone crazy!!! Lol
What is up my nerds…. Lmfao 💀
Good non-scientific explanation but, just put a charged battery in?
What can i do for a smoother Lunch
finger control
Great Vid, very informative comparison. Shame your hands flapping on screen is the hero of the video.