Great video and the first time that i saw a video how to do a professional soldering job on an ESC. Even after more then 20 years in this hobby i'm still happy to learn some new tricks and tips from the pro's :-)
Hi, how do you reset the data logging? Moved esc to another car with other motor, old values are not usefull anymore. And would be nice as monitoring after each run. Thx!!
I have this combo coming soon and as someone who has never soldered this gives me confidence to do all of this. Question I will also use male XT90 to connect to LIPO's female XT90 but how do I connect the female XT90 on LIPO to the charger that has a smaller female XT60 port? Advice would be really appreciated.
VERY informative and thoughtful! Cant wait to see tuning the timing and turbo as I have never used nor had a brushless setup and even on brushed I never messed with timing... I’m seriously looking at the Xr8 pro esc with a 3660 g2 3200kv motor for bashing and occasional racing with a 4x4 sct (Tekno 410.3 sct)... any tips would be helpful and great as it will be my first sct and race rig
i guess Im asking randomly but does any of you know of a trick to log back into an instagram account?? I stupidly forgot the password. I love any tricks you can give me.
@Ulises Ronald thanks for your reply. I found the site through google and Im waiting for the hacking stuff now. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
I just bought and installed a Hobbywing XR8 pro. We have gone through calibration of neutral, throttle and brake. Once that’s done the ESC blinks green 4 times then starts blinking red. Batteries are fully charged. I do not have a programmer. What am I doing wrong?
could you please let me know if the xr10 pro g2 can use lihv batteries?? i know i can charge them at normal voltages but will it accept 7.6v? i cant find much info on this... thank you!
@@HOBBYWINGOfficial I just bought this xr8 pro g2. I was going to use it for no prep drag. Your tech is saying it will damage the MOSFETs using V10 1/10 motors. And the tuning isn't supported help
Hi, Is it possible to download the logs in a text format? I love that it logs, but find it difficult to review on my phone. Would be cool if I could get them on my PC. (I have the OTA jobby) Cheers
Sooooo, i hate soldering had a F'n hard time, my ESC got warm cuz i left it on to long,was afraid to turn it on,i SAID f it plugged a battery in,it turned on,it's ok,right? (The esc)
Thank you Brother! Great Video
Great video and the first time that i saw a video how to do a professional soldering job on an ESC. Even after more then 20 years in this hobby i'm still happy to learn some new tricks and tips from the pro's :-)
That was an awesome video! And I may send my Hobbywing ESC & Motor for soldering. 😂
quick question is possible to set the rpm to a specific amount?
👍👍
Great info and fantastic tips, why can't there be more videos like this out there from suppliers to help demystify some of these systems, thank you!
Can xr8 pro g2 run 2s sensorless 4 pole motor , is there a motor or kv limit
Is the 1650kv and 1100kv a delta or wye wind, I was wanting the xlx2 but didn’t know if I could just use the motors or not
Shoot us an email and we can confirm with motor division. NorthAmerica@hobbywing.com
Can the xr8 pro handle a 3.5t motor.
Can you solder the wires standing straight up?
How do you program without using programmer?
Hi, how do you reset the data logging? Moved esc to another car with other motor, old values are not usefull anymore. And would be nice as monitoring after each run. Thx!!
Factory Reset should clear it.
I have this combo coming soon and as someone who has never soldered this gives me confidence to do all of this. Question I will also use male XT90 to connect to LIPO's female XT90 but how do I connect the female XT90 on LIPO to the charger that has a smaller female XT60 port? Advice would be really appreciated.
VERY informative and thoughtful! Cant wait to see tuning the timing and turbo as I have never used nor had a brushless setup and even on brushed I never messed with timing... I’m seriously looking at the Xr8 pro esc with a 3660 g2 3200kv motor for bashing and occasional racing with a 4x4 sct (Tekno 410.3 sct)... any tips would be helpful and great as it will be my first sct and race rig
i guess Im asking randomly but does any of you know of a trick to log back into an instagram account??
I stupidly forgot the password. I love any tricks you can give me.
@Enzo Dawson Instablaster :)
@Ulises Ronald thanks for your reply. I found the site through google and Im waiting for the hacking stuff now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Ulises Ronald It worked and I finally got access to my account again. Im so happy!
Thank you so much you saved my account !
@Enzo Dawson no problem =)
I just bought and installed a Hobbywing XR8 pro. We have gone through calibration of neutral, throttle and brake. Once that’s done the ESC blinks green 4 times then starts blinking red. Batteries are fully charged. I do not have a programmer. What am I doing wrong?
Would this b the same way to set the xr10g2?
Yes.
could you please let me know if the xr10 pro g2 can use lihv batteries?? i know i can charge them at normal voltages but will it accept 7.6v? i cant find much info on this... thank you!
Can be set to your desired voltage in .1 v steps.
What brand is the welder? He is a very good welder. I want one like this.
How will that work for no prep?
A popular option.
@@HOBBYWINGOfficial I just bought this xr8 pro g2. I was going to use it for no prep drag. Your tech is saying it will damage the MOSFETs using V10 1/10 motors. And the tuning isn't supported help
Didn't you mean Alyouminium?
I wonder how this would do in a ryft
Hi,
Is it possible to download the logs in a text format? I love that it logs, but find it difficult to review on my phone. Would be cool if I could get them on my PC. (I have the OTA jobby)
Cheers
😂😂😂 pc 😂😂😂 boomer.
How are your hands so clean? Are they new?
Hygiene.
Sooooo, i hate soldering had a F'n hard time, my ESC got warm cuz i left it on to long,was afraid to turn it on,i SAID f it plugged a battery in,it turned on,it's ok,right? (The esc)
Sounds like it. In the future feel free to email us directly - NorthAmerica@hobbywing.com
@@HOBBYWINGOfficial thank you.... It works💪😎👍
You think they'll be good in a drag car with a 1/10 scale motor
Install was easy. Calibration is another story, it doesn’t work!
It does not work…
It won’t fit in the gap and it keeps unsticking