A lot of work and effort went into this excellent website from a very well informed guy.... thanks so much for making things easy for the rest of us out there! Love the big burger and your tutorials.
Separating the lower and upper halves of the cover makes getting out and replacing the top right 8mm bolt much easier. A flexible socket extension is also necessary.
I wish I would watch this before I attempted my own as I tried to pull the filter element out and destroyed it so I had to order a new one which was around $20 because of the shipping
Hi Ledude. I had an old CVT filter that I had washed nice and clean before that I put into storage after replacing it with a new one last time. Now, as I’m ready to switch back, I notice that my old cleaned up one has the rubbery gasket seal along the edge starting to fall apart and crumble. I’m wondering if I should chance using it as the filter since the housing is pristine but I’m worried that that edge seal might continue to fall apart and the pieces could slip past the edge and into the CVT unit or at the very least, not provide an adequate seal around the filter. Could the crumbling edge seal lead to a serious issue, do you think?
you can take it out and clean it with a soft brush and compressed air, replace it if the foam is falling apart. check the DIY for it on my burgman center for more detailed instructions.
I have a question for you. I notice that from time to time, I get the dash of my 2003 Burgman 650 flickering and at times after starting the motor stalls, or even refuses to start. What could be the cause of this annoying phenomen? When I get started the scooter runs excellent though and it very responsive. Strange. I checked the battery and all connections.
Hi everyone, I have a Burgman 650 Year 2005, this one presents in the acceleration sticomapos and kuando descelera presents new sitcom I would like to know the ki si passes
The Dude rules!
Thank you so much for your videos. I recently bought a 2007 and these have been invaluable.
I love my 07!
THANK YOU FOR TAKING THE TIME TO MAKE THESE VIDEOS. I appreciate you.
We would be lost without you!!! Thank You!
A lot of work and effort went into this excellent website from a very well informed guy.... thanks so much for making things easy for the rest of us out there! Love the big burger and your tutorials.
Separating the lower and upper halves of the cover makes getting out and replacing the top right 8mm bolt much easier. A flexible socket extension is also necessary.
Hai fatto da scuola a molti GRAZIE
I guess it's on the left side - you cannot see this on the video.
Keep up the excellent work.
Brilliant video, well done that man
I love your tutorial Videos
boy9871
The top foreward 8mm bolt is a pia to take out. I didn't bother reinstalling it.
I wish I would watch this before I attempted my own as I tried to pull the filter element out and destroyed it so I had to order a new one which was around $20 because of the shipping
Howdy! I also have a burgman from 2009. Where can I buy this CVT filter? And at how many km does it change?
Hi Ledude. I had an old CVT filter that I had washed nice and clean before that I put into storage after replacing it with a new one last time. Now, as I’m ready to switch back, I notice that my old cleaned up one has the rubbery gasket seal along the edge starting to fall apart and crumble. I’m wondering if I should chance using it as the filter since the housing is pristine but I’m worried that that edge seal might continue to fall apart and the pieces could slip past the edge and into the CVT unit or at the very least, not provide an adequate seal around the filter. Could the crumbling edge seal lead to a serious issue, do you think?
ALL I CAN SAY IS TO USE AN OEM FILTER FOR YOUR MODEL YEAR
How many km of this filter will one change?
hi there ! how to determine when to clear cvt filter
Did you clean or replace the filter?
leDude00 , I have question, I can clean the filter or replace it?.thanks.
you can take it out and clean it with a soft brush and compressed air, replace it if the foam is falling apart.
check the DIY for it on my burgman center for more detailed instructions.
I have a question for you. I notice that from time to time, I get the dash of my 2003 Burgman 650 flickering and at times after starting the motor stalls, or even refuses to start. What could be the cause of this annoying phenomen?
When I get started the scooter runs excellent though and it very responsive. Strange.
I checked the battery and all connections.
I have a 2003 Suzuki Burgman 650 is the cvt filter in the same place as mine as in this video????
IT IS THE SAME ON ALL BURGMANS
Hi everyone, I have a Burgman 650 Year 2005, this one presents in the acceleration sticomapos and kuando descelera presents new sitcom I would like to know the ki si passes
where is the air filter on a 2017 burgman 650?
same place as all other model years
hello Mr
can you help me
the v belt drive for cvt cut
i replace it
but the speed stop on 70km/h
what is the problem? ??
Have you been able to find out what the problem was? I am guessing that there was an issue with the transmission. May be wrong.