Thanks for your help and easy visual instructions. My Jackery charger battery and board come out the other end so I needed to have a longer USB wire. It's been sitting unused for almost a year but now it's working. Thanks again!
Thanks so much, I had the same issue where the Micro USB B socket broke off and went inside the case. I cut the charging cable and soldered it on - it worked 100%. 👌
sir my problem is , i have to make a ups using power bank... i just used 5v to 12v step up module.for my router. connected it with power bank and using router continuously. but the problem is i cant use the power bank while connected through power outlet... there is switching issue happens.. while powers off and power on.. time... approx 2 second.... how to prevent that power bank behavior? i am using mi powerbank
Hi, thank you for the question! You have to see diagram of your micro USB to identify positive and negative. Other wires are for data transfer, you do not need them in this project.
Sorry hearing that. Please double check the polarity of connection and than make sure contacts are soldered properly and have strong connection. Please let me know the result.
Hey brother don't worried about number of subscribers you're getting..keep doing.. and think from audience's perspective.. you can do much more.. Do again and again..you can achieve more..🔥 I don't know..why I am saying this to you..but my mind says.. you should tell this to him..so I did.. go ahead..do what you love🤗🔥
Sir please this is kelvin from Nigeria. I deal in tech-electronics. Please I will want you to put me through some things about this changing port. That is if I want to use the usb cable to run the charging port but animation video. And also the alternative way to run the usb cable if the charging port is damage
thank you for your question! In the video (23 seconds) I am showing negative and positive wire spots. But if you have tester, try to test on your board.
Wish i could show you a picture tried to retrofit my ear buds as the micro usb just fell out but the heat from my soldering iron just burnt out the points i reckon i will try it again i think its an inferior product hardly anything to solder onto im not knocking the process just pissed off gotta buy new buds now so wanted this to work i got broken micro usb everywhere lol
@@iceman5167 I am sorry, hope you will manage to repair contact points, please use extra Flux, it is not enough just to use solder with integrated flux.
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
Can’t help but nod my head to that beat. Been humming it all dayt
Thanks for your help and easy visual instructions. My Jackery charger battery and board come out the other end so I needed to have a longer USB wire. It's been sitting unused for almost a year but now it's working. Thanks again!
I am happy to be helpful:) thank you for commenting!
Thanks so much, I had the same issue where the Micro USB B socket broke off and went inside the case. I cut the charging cable and soldered it on - it worked 100%. 👌
Thank you for your comment! I'm glad to be helpful 😊
Thanx for the info I appreciate it
thanks, I will try to solder my broken off mini USB back in place first
Thanks for the information great help
thanks, a lot.
Thank bro😊
Ultimate man I done this to my power bank now is good....... orelse may it to buy a new.....
But I think you can do much more.. because you did it very matured manner...
I'm just trying to encourage you..😄
Because I think you can do much more
Thanks for encouraging 👍
Thanks... had th3 same issue about to solder my cable to a rechargeable lamp.
You are welcome.
sir my problem is , i have to make a ups using power bank... i just used 5v to 12v step up module.for my router. connected it with power bank and using router continuously. but the problem is i cant use the power bank while connected through power outlet... there is switching issue happens.. while powers off and power on.. time... approx 2 second.... how to prevent that power bank behavior? i am using mi powerbank
Unfortunately, I am not the best person to ask about this. Maybe my subscribers could answer you.
what's the song?
sir, excuse my level, is micro usb port trick is just to solder red et black wire only? what about other wire pins 2 3 ?
Hi, thank you for the question! You have to see diagram of your micro USB to identify positive and negative. Other wires are for data transfer, you do not need them in this project.
@@MrZurikmurik thanks a lot
Usefull! LIKE!
Hey man i lost footprint of one side can it still be repaired?
Hi, Can you show me the pic of what you mean footprint lost?
@@MrZurikmurik Thanks for reply, What I meant was that I have no soldering joint of one side on which I can solder wire
@@tausifkhan9018 Can you clean a flux around the place where you supposed to solder wire and find the copper surface line leading from the place.
@@MrZurikmurik I will try this, Thanks for the help😃👍
Thanks for the video, my USB cable gets warm when I tried this what could that be from?
Sorry hearing that. Please double check the polarity of connection and than make sure contacts are soldered properly and have strong connection. Please let me know the result.
Who's the music? Please!
th-cam.com/video/2HFTV5YdBf4/w-d-xo.html
فيديوا مفيد جداً جداً واكثر من رائع احسنت الاختراع
Sorry I can't read Arabic
What a quality videography..go ahead man🤗♥️
Wishes..🔥
Thank you!
Hey brother don't worried about number of subscribers you're getting..keep doing.. and think from audience's perspective.. you can do much more..
Do again and again..you can achieve more..🔥
I don't know..why I am saying this to you..but my mind says.. you should tell this to him..so I did.. go ahead..do what you love🤗🔥
Thank you my friend! I do have some projects in plan and hope will realize them soon ;). Thanks again.
I will try this tomorrow
Good luck 👍
Can we do that on android phone or tablet with broken charging port?
I don't recommend. You want be able to transfer data via cable. But, if you want to just charge it you can do this
@@MrZurikmurik can I do this if my phone or tablet don't have battery? Thank you for response...
I'm not sure. You have to try it.
@@MrZurikmurik ok I will try it.. thank you for your response.. 🙂
@@hgmaxon7433 I have tried it on NUK tablet and it worked. But on old LG Android phone it didn't work without battery.
Sir please this is kelvin from Nigeria. I deal in tech-electronics. Please I will want you to put me through some things about this changing port. That is if I want to use the usb cable to run the charging port but animation video. And also the alternative way to run the usb cable if the charging port is damage
Hi, not sure what your question is...
Now you can plug it into itself and it'll charge.
Interesting :)
Very nice
Thank you!
Please I tried this but it's charging very slow, it takes more than 9 hours before charging full, what's the problem sir?
Hi, please try to use fast charger.
@@MrZurikmurik thanks sir
BHai is ke kaneksan kese kare h aap ne
Sorry, I don't understand.
Hi what is the title of this music in English please. Many thanks
th-cam.com/video/2HFTV5YdBf4/w-d-xo.html "Lazuri"
Tipe b hack tipe c porot install please 🙏🙏🙏🙏..powar bank may karo
Bop comedy was here 😀
My + print is gone any idea
I am not sure if I understand it, could you please rephrase it?
@@MrZurikmurik print where we sold red wire that is gone i mean so where to sold red wire...
thank you for your question! In the video (23 seconds) I am showing negative and positive wire spots. But if you have tester, try to test on your board.
@@MrZurikmurik i mean my print where we sold red wire is broken so how to find its point...
Ah, ok, if it is broken, I would scratch the protection layer next to it, until you see the coper line leading to a broken "print" of positive spot.
Hi sir..do you have instagram sir?because i want to ask you something
Sorry, I don't have Instagram. I have FB. Find Zurab Laliashvili
@@MrZurikmurik sir if my usb have 4 wire black,white,apple green and red,which wire i have to use?pliss reply
Tried it doesn't work
I'm sorry to hear that, if you follow all video instructions and polarity rules it should work.
Wish i could show you a picture tried to retrofit my ear buds as the micro usb just fell out but the heat from my soldering iron just burnt out the points i reckon i will try it again i think its an inferior product hardly anything to solder onto im not knocking the process just pissed off gotta buy new buds now so wanted this to work i got broken micro usb everywhere lol
@@iceman5167 I am sorry, hope you will manage to repair contact points, please use extra Flux, it is not enough just to use solder with integrated flux.
@@MrZurikmurik cheers for the feedback 👍🏼👍🏼
@@iceman5167 thank you and good luck!