hi there, I have a 2011 fiesta se, had the TCM replaced two days ago, it was programmed but the person never did the adaptive learning, after trying to drive the vehicle it gave me a P2831 code, the person that programed the TCM told me an adaptive learning was not necessary, looking at your video it looks like it does, what`s your fee to do an adaptive learning and do I have to bring the car to you or can you come to our house and add the trip charge?
For the viewers, I met with Andres today. I reprogrammed his tcm and I preformed the adaptive learning. Car has to be driven to determine weather it has a mechanical issue or not. Wish him the best of luck.
@@DallasAutoDiag Thank you for all your help, drove the car to work today with no issues, glad I came across your video, every shop I called, first answer was to drop the transmission and rebuild, a $3000 to $4500 job, no one even tried to explain that an adaptive learning was needed after working on the transmission, again , thank you, very professional and showed up in time , will recommend to other people
only with adaptive learning did it solve it? my fiesta 2013 is giving this code p2831. but when trying to do the adaptive learning it gives an error and asks to check the electrical system. could it be bad battery?
I had same code on a 2014 as well as an intermittent feeling of transmission slipping. Performed the same adaptation with A Verus and it corrected the issue. I think they lose adaption and the clutches wear.
@@jasonashley9853 The Autel can also program modules as well as long as the old one is functional. You have the old one connected, go into programming and the scanner holds the info, then you connect the new module and the Autel pushes the data to it
Awesome, really helpful video for doing this relearn on a Ford😉 The best thing about your videos is the beautiful exhaust notes in the background, really like'em😉 Thanks for sharing Bro, Stay Safe❤
@@DallasAutoDiag the car's passing by in the background, here are a couple of'em that I noticed😉 @ 9:34, 9:48, 10:00, 10:06, 12:46, 15:44, 16:04, 21:35 👆I hope these are spot-on & you will enjoy them (like I did) after watching again😉
If I get a TCM from a salvage/junk yard do I have to do any type of flash/reset on the used TCM before/while replacing it, or could I just do all steps you do?
FordFocus S 2012, 92k miles. Recently it was hard shift from start (1st on 2nd), and even didn't changed! I pulled over on 1st gear. P2862 Shift Fork B Actuator Circuit High. (as we know B - it's 2,4,6,R gears) Attempt this Adaptive Learning with FORScan 2.3.6. Extended through Windows11 - didn't reset the DTC. NEXT Step - I will try to replace actuators....
of course it didn't help. so i did try to clean actuator port with wd40 and I failed - the bearing just fell apart when I was turning actuator tool. so I guess now I should looking for rebuild the gearbox completely.
the problem was in one of the TCM's motor, B to be sure. so after replacement TCM it works again. My clutch fork cleaning went me to fork replacement, so i decide to replace the clutch too. Also, the fluid was changed. Now it works almost without pushing or shuddering. Really good
I know the 908 series does have the option. Im not sure if the 906 series would do so. Im pretty sure there should be another Chinese brand cheaper than autel that would have it.
@@DallasAutoDiag I’m struggling to find one cheap I’m getting so confused on which one would do the job .. co you possibly find a model for a cheap Chinese one for me . So I don’t buy the wrong one ☝️… thanks in advance
@@garrieparsons2265 you can always call tge company or email them and ask that question of that specific car. They should have a sheet of coverage and better answer you.
@@DallasAutoDiag ok thanks . I just got finished fixing my transmission by manually moving the clutch forks and cleaning with brake cleaner drives like new now .. no computer programmer.. amazing.. I’m well happy.. thanks for your response reply 👍
Hi, I have the 2013 Ford Focus. I was been told that the TCM was bad, so I replaced the brand new one. It was programmed, but have not done adaptive learning. Can you stop by and help me out? I am living in Farmers Branch, Dallas, Tx
Sometimes Forscan is very touchy on the Adaptive Learning Procedure. Make sure the car battery has the trickle charger on it to keep the battery level above 12.0 volts while doing the Forscan Diagnotics. Goof Luck :)
@@MikesVlogss I would definitely advise putting something on the battery. That said, I tried TCM relearn on Forscan, and it immediately said service procedure interrupted. It wouldn't let me proceed. This is because my battery was on the verge of dying.
I actually have a Ford Focus SE 2014 with DSP6 and a Forscan Scanner, i'm going to do the firmware update and the adaptive learning tomorrow. Do You have any advices or recommendations?
It works with the Beta version for sure. I programmed my blank TCM but I'm just trying to get the clutch adaptive learn to pass the initial clutch adjustment. Battery is good but it fails on that step every time.
@@rctowers being it said circuit low I’ve been getting a low battery light on. I replaced the battery and it’s been fine since. I have some clutch actuators on the way from eBay just incase
@@retr0gameryt808 I haven’t checked my battery, thanks for the reply. My car gave me the same code and would not shift correctly. Did your car have any symptoms of hard shifting ? What’s odd about my car is when I would turn it off and let it sit for a bit it would drive normal and after maybe a couple miles it would start acting up again. But glad to know your car is doing well with a battery replacement, hopefully it fixes your problem
@@rctowers so my issue was that the battery was so low it couldn’t provide 100% power to the tcm like it needed. Go get your battery tested or turn your key to the on position but don’t start it. See if low battery comes up. I replaced the actuators just incase and it shifts like it’s brand new now
Hi there thanks for these helpful info I have 2012 focus and not shifting well I knew it’s the TCM I bought a programed one and put it on but it actually drives worse now I change both of the actuators with new one and still have the same problem but if i put my old one drive few minutes okay than not shifting well sometimes with nee one it’s just stop shifting and don’t drive also it’s hesitate a lot look like she on 3rd while I’m stopping Any advice? Thanks a lot
hi there, I have a 2011 fiesta se, had the TCM replaced two days ago, it was programmed but the person never did the adaptive learning, after trying to drive the vehicle it gave me a P2831 code, the person that programed the TCM told me an adaptive learning was not necessary, looking at your video it looks like it does, what`s your fee to do an adaptive learning and do I have to bring the car to you or can you come to our house and add the trip charge?
For the viewers, I met with Andres today. I reprogrammed his tcm and I preformed the adaptive learning. Car has to be driven to determine weather it has a mechanical issue or not. Wish him the best of luck.
@@DallasAutoDiag Thank you for all your help, drove the car to work today with no issues, glad I came across your video, every shop I called, first answer was to drop the transmission and rebuild, a $3000 to $4500 job, no one even tried to explain that an adaptive learning was needed after working on the transmission,
again , thank you, very professional and showed up in time , will recommend to other people
only with adaptive learning did it solve it? my fiesta 2013 is giving this code p2831. but when trying to do the adaptive learning it gives an error and asks to check the electrical system. could it be bad battery?
@@edufc270592 Good battery voltage is very much needed on these electrical components.
@@edufc270592 do the grounds mod, there is like 3 grounds that are only grounded to the paint of the frame and they definitely need to be redone
I had same code on a 2014 as well as an intermittent feeling of transmission slipping. Performed the same adaptation with A Verus and it corrected the issue. I think they lose adaption and the clutches wear.
I have only completed this process with the Forscan/IDS...nice to see that Autel can do it!!!!
Forsacn is a powerful little software. I use it a lot.
if i but a new TCM and it needs programmed is this the same procedure? or is the programming of a new tcm different than this ?
@@erosswog programing is different
@@erosswog it's slightly different but I understand you can use Forscan to program the TCM.
@@jasonashley9853 The Autel can also program modules as well as long as the old one is functional. You have the old one connected, go into programming and the scanner holds the info, then you connect the new module and the Autel pushes the data to it
Awesome, really helpful video for doing this relearn on a Ford😉
The best thing about your videos is the beautiful exhaust notes in the background, really like'em😉
Thanks for sharing Bro, Stay Safe❤
You got me thinking now. Which exhaust notes?
@@DallasAutoDiag the car's passing by in the background, here are a couple of'em that I noticed😉
@ 9:34, 9:48, 10:00, 10:06, 12:46, 15:44, 16:04, 21:35
👆I hope these are spot-on & you will enjoy them (like I did) after watching again😉
@@isalmankhan1 I know what you mean now lol. this lot is the first one near a main traffic light. and I was parked next to the fence :)
I’ve been trying to do this thing like 2 days until see that video really good info bro 😎
Glad that it helped
Code will come back, the shift forks are likely binding from clutch dust and need either cleaning out or replacing.
Thanks for the tip
If I get a TCM from a salvage/junk yard do I have to do any type of flash/reset on the used TCM before/while replacing it, or could I just do all steps you do?
There has to be programming and relearn
Ford has recall out for the tcm either 10 years old or 150 000 miles
The recall code 14M02
FordFocus S 2012, 92k miles. Recently it was hard shift from start (1st on 2nd), and even didn't changed! I pulled over on 1st gear.
P2862 Shift Fork B Actuator Circuit High. (as we know B - it's 2,4,6,R gears)
Attempt this Adaptive Learning with FORScan 2.3.6. Extended through Windows11 - didn't reset the DTC. NEXT Step - I will try to replace actuators....
of course it didn't help. so i did try to clean actuator port with wd40 and I failed - the bearing just fell apart when I was turning actuator tool. so I guess now I should looking for rebuild the gearbox completely.
I think it would be a good call
Good luck
the problem was in one of the TCM's motor, B to be sure. so after replacement TCM it works again. My clutch fork cleaning went me to fork replacement, so i decide to replace the clutch too. Also, the fluid was changed. Now it works almost without pushing or shuddering. Really good
Hola buen dia,
Si tengo la TCM K00 instalada en mi auto y la reemplazo por otra igual K00, tengo que programar o solo quitar y poner?
Saludos!
What scan tool you using please??? I’m in the market for a new one need one good with my ford I own ? Thanks 👍 great videos 👋
Im using autel ms919. I recommend ms909. If you want one that also good on programing keys you should buy the IM608.
@@DallasAutoDiag awesome thanks 👍 I’m just watching your videos.. great info thanks 👋
Where are you at in Dallas? I could use some help on my car with a reset also. I ordered a launch scanner but it wouldn’t do that
I am mobile and also have a shop in Kennedale
@@DallasAutoDiag when are you available or do you have a card or something I can call and set up with you?
If I put new TCM do I need to do the learning? because now it’s driving worse with new programed TCM
Thanks
New TCM would need programming and learning.
Hello, please a question, what is the OBD unit your using AUTEL?, but what model and type ,thanks
Hi. Ist MS919
Hey bro how much would you charge me to do the same diagnostic to my 2012 Ford focus let me know thanks
What codes does it have?
Thanks for informative video. I'm curious which Autel model you're using.
Ms919
@@DallasAutoDiag Thank you very much
Do you know of the cheapest scanner that could do the relearn on for focus ??? I don’t have deep pockets for a scanner .. thanks 👍
I know the 908 series does have the option. Im not sure if the 906 series would do so. Im pretty sure there should be another Chinese brand cheaper than autel that would have it.
@@DallasAutoDiag I’m struggling to find one cheap I’m getting so confused on which one would do the job .. co you possibly find a model for a cheap Chinese one for me . So I don’t buy the wrong one ☝️… thanks in advance
@@garrieparsons2265 you can always call tge company or email them and ask that question of that specific car. They should have a sheet of coverage and better answer you.
@@DallasAutoDiag ok thanks . I just got finished fixing my transmission by manually moving the clutch forks and cleaning with brake cleaner drives like new now .. no computer programmer.. amazing.. I’m well happy.. thanks for your response reply 👍
@@garrieparsons2265 happy to hear that man. Is this your own car?
Hi, I have the 2013 Ford Focus. I was been told that the TCM was bad, so I replaced the brand new one. It was programmed, but have not done adaptive learning. Can you stop by and help me out? I am living in Farmers Branch, Dallas, Tx
Sure just contact me through Facebook
@@DallasAutoDiag is that the name on Facebook?
@@nguyenmanhnguyen6847 Dallas Auto Diag
Just sent you the message on whatsapp
Great video! Do you think that I could do this at home with Forscan?
I think foscan will do it.
Sometimes Forscan is very touchy on the Adaptive Learning Procedure. Make sure the car battery has the trickle charger on it to keep the battery level above 12.0 volts while doing the Forscan Diagnotics. Goof Luck :)
@@MikesVlogss I would definitely advise putting something on the battery. That said, I tried TCM relearn on Forscan, and it immediately said service procedure interrupted. It wouldn't let me proceed. This is because my battery was on the verge of dying.
Ford dealership should know to do this after they replace my TCM?
I actually have a Ford Focus SE 2014 with DSP6 and a Forscan Scanner, i'm going to do the firmware update and the adaptive learning tomorrow.
Do You have any advices or recommendations?
I don't think you can do any software update using forscan. you can still do the adaptive learning. let me know how it goes with you.
It works with the Beta version for sure. I programmed my blank TCM but I'm just trying to get the clutch adaptive learn to pass the initial clutch adjustment. Battery is good but it fails on that step every time.
What model scanner did you use autel 919?
Yes the ms919
What scanner are you using? I am on the market for one.
Autel ms919. I recommend the IM608
Is there a more inexpensive scanner that can do the relearn ?
I just got code Po90c and check engine light while driving home. Any suggestions?
I have the same code! Have you fixed it? Looking for a fix
@@rctowers being it said circuit low I’ve been getting a low battery light on. I replaced the battery and it’s been fine since. I have some clutch actuators on the way from eBay just incase
@@retr0gameryt808 I haven’t checked my battery, thanks for the reply. My car gave me the same code and would not shift correctly. Did your car have any symptoms of hard shifting ? What’s odd about my car is when I would turn it off and let it sit for a bit it would drive normal and after maybe a couple miles it would start acting up again. But glad to know your car is doing well with a battery replacement, hopefully it fixes your problem
@@rctowers so my issue was that the battery was so low it couldn’t provide 100% power to the tcm like it needed. Go get your battery tested or turn your key to the on position but don’t start it. See if low battery comes up. I replaced the actuators just incase and it shifts like it’s brand new now
Hi there thanks for these helpful info
I have 2012 focus and not shifting well I knew it’s the TCM I bought a programed one and put it on but it actually drives worse now I change both of the actuators with new one and still have the same problem but if i put my old one drive few minutes okay than not shifting well sometimes with nee one it’s just stop shifting and don’t drive also it’s hesitate a lot look like she on 3rd while I’m stopping
Any advice?
Thanks a lot
Nicee6