there was no cabling going to the call point at that point in time it was just to cover the hole haha. eventually managed to get permission to put it there but its tempting to replace it with the KAC slide front with a discovery protocol as it fits in with the curvy MK logic plus switches and doesnt have a face for radio :).
aico have wireless communication modules for their smokes, heats , multisensors and CO sensors that all get paired together and when one goes off they all go off. I have the panel interface unit that will short the inputs on the panel, i have programmed the panel to latch on the alert contacts when they get shorted. take a look at a video where the door of the panel is open you will see thin wires running from the terminals those are for the panel interface module. www.aico.co.uk/product/ei413-radiolink-panel-interface-module/ www.connevans.co.uk/product/5672665/40CM208WRF/Aico-Ei208WRF-RadioLINK-Carbon-Monoxide-Alarm
the one in the cupboard has a reset element i added in it if that's the one your referring too. the other ones are resettable you cannot add glass to the new apollo ones.
Noahandrews Andrews because its heat, it’s not just at the snap of his fingers, it has to heat up. It was blindly weirdly because of pre alarm and the polling does it because it’s about to go off.
I don't know why it took that long to activate, but Discovery detectors tend to take longer to activate than XP95 ones, also Discovery devices poll every so often which causes the blinking. They blink faster when the analogue reading rises (i.e. when it's detecting smoke, heat, or mcp pressed).
@@SleepExports not to this level my system is overkill. regular grade d system is all thats required. scotland has new legislation to come into force by next year mandating all domestic properties have interconnected alarms fitted. www.gov.scot/publications/fire-and-smoke-alarms-in-scottish-homes/
Nice great job on the tidying lol
Udjd
Our school has Adressable fire alarm system With Speaker detectors speaker Strobe detectors and cal points
like the Yodel tone
u are back yay!!!
Nice!!!
That sound the same sound of fire alarm that is used in my school I was looking around for that sound and then I found your channel
Same with mine
Good old symphoni in the garage
when you are about to do a test what you don’t have a clue on the the fire alarms go off 2:06
You have the exact same fire alarms at my school the same on the inside and on the outside lol
Same
7:05 Is the Sainsbury’s Fire Alarm!
0:22 remember a older call point used to be there in your older videos but I was sad you didn't test it before
there was no cabling going to the call point at that point in time it was just to cover the hole haha. eventually managed to get permission to put it there but its tempting to replace it with the KAC slide front with a discovery protocol as it fits in with the curvy MK logic plus switches and doesnt have a face for radio :).
I think I saw your old fire alarm tests when I was young.
ye same
fire alarms are super scary
I have the exact alarm type at my school but it’s made by Channel Fire Alarms
companies like channel or Chubb will rebrand other manufacturers equipment.
When addresssable system test 16 going on TH-cam
very soon it's already been done. there should be a few videos coming within the next two weeks.
I suppose you know what you doing
Hello. What technology is used to Transmit the Carbon monoxide Alarm to the fire alarm panel ?
aico have wireless communication modules for their smokes, heats , multisensors and CO sensors that all get paired together and when one goes off they all go off. I have the panel interface unit that will short the inputs on the panel, i have programmed the panel to latch on the alert contacts when they get shorted. take a look at a video where the door of the panel is open you will see thin wires running from the terminals those are for the panel interface module. www.aico.co.uk/product/ei413-radiolink-panel-interface-module/
www.connevans.co.uk/product/5672665/40CM208WRF/Aico-Ei208WRF-RadioLINK-Carbon-Monoxide-Alarm
How did you get to make the fire alarms do a different tone for carbon monoxide than fires?
i may do a video on it as i think it will be an interesting topic to cover.
@@testlogs9005 please do test vlogs
Alarms from Apollo
Is that some sort of resetable element in that break glass call point
the one in the cupboard has a reset element i added in it if that's the one your referring too. the other ones are resettable you cannot add glass to the new apollo ones.
Why did it take so long that one heat detector to activate also why was it blinking weirdly?
Noahandrews Andrews because its heat, it’s not just at the snap of his fingers, it has to heat up. It was blindly weirdly because of pre alarm and the polling does it because it’s about to go off.
I don't know why it took that long to activate, but Discovery detectors tend to take longer to activate than XP95 ones, also Discovery devices poll every so often which causes the blinking. They blink faster when the analogue reading rises (i.e. when it's detecting smoke, heat, or mcp pressed).
will that call point get knocked by accident
if you are referring to the one by the front door, it hasn't yet and it been there a month and a bit so far.
What sounders are you using for this?
XP 95 base sounders with beacon and Discovery open area voice sounders.
Wait the parent you can,t reset the alarm and siliens the sound📴
Just saying maybe clean up that server/network room in the closet
honestly, if i had my way there will be nothing other than the services in that cupboard.
@@testlogs9005 oof
This is in uk
yes it is.
Uk pull station
yeah without the pull hahha.
With the push actually. No wonder they don't call it push stations.
how
much
did
this
cost???
probably £600 thats for everything. got most of the system second hand. the new parts are quite pricey.
Thanks mate.
Why do you have a fire alarm in a house?
i just do 😊
@@testlogs9005 So not a legal requirement?
@@SleepExports not to this level my system is overkill. regular grade d system is all thats required. scotland has new legislation to come into force by next year mandating all domestic properties have interconnected alarms fitted. www.gov.scot/publications/fire-and-smoke-alarms-in-scottish-homes/
@@testlogs9005 🤙
I upload 1 video I join my channel for 2 years ago
Chubb is french
interesting :)
Rryryryrurururururutututurururututututururutututututtutuuttuuttutuutututitutitututututututututiitututurutututururuurutututitutuutuutututututtutiittiututututtutititu
um okay, 😕
I agree with test logs.
😭
hi
What📩
😡🤬