Thanks for the video. Ordered the same parts and installed on my 87 turbo t. I cut the holes on the dust boots that came with the Hella stuff larger to fit past the led heat sinks to try and keep the dust out. I also like the OE look
Thanks for posting this, I was close to going with the JD units because I wanted LEDs but I am going to give this a go since I already have the lo beam housings. Should have them installed this week.
Nice! Let me know how it goes. I don't mind the black housings on these cars but I'm more partial to stock looking lghts that preform like a newer vehicle.
Thanks! Links to the lenses and bulbs are in the video description. Housings are: Hella H4 Part# 3177001. LED bulbs are: Aukee 6000k 50 watt LED, Part# 659516951940 Since they are 50 watt bulbs and they come with the conversion as part of the wiring, there was no additional harness needed. Just plug and play!
I ordered the light bukbs u have in link but there not the one's u have there try using the number u put up for someone else that had the same problem but cant find them at all
Great video. I actually bought this same kit, 4-headlight housings (high and low beams) and led bulbs, thanks to your recommendation. The low beams plugged in directly just like you showed in your video. The high beam connector from the harness on the car is a 2 prong connector and the led bulb is a 3 prong. I can notch the plastic connector to on the harness to plug in the led but will that effect it in anyway?
Thanks! Notching the plastic connector is no problem since that top prong is for low beam light and will not be used anyway. You may have to switch the green and black wires around in the high beam connector for all 4 to work properly. I'm about to do mine as well.
So stupid question, to do all 4, I just need 4 housing and and 2 packs of the bulbs, the bulbs look like the come 2 in a pack, or do I need a different bulb for the inside or high beam light?? Hope that makes sense
Great question. What I do know is Hella makes a H1 housing for high beams that might diffuse the light a bit differently than the H4. The bulbs would all be the same, 50w LED. I do intend to add the H1's to mine but was waiting for the price to come down and wanted to get the low beams in first to drive at night this summer. So far so good!
When you do your high beams, what Hella housing will you use ? You said you thought the H1 housing might reflect differently. Can I use the same H4 Hella (3177001) for high beams, and then use the H1 Aukee conversion ? If so, would you know the correct Aukee p/n ? Thank you very much - I’m really looking forward to doing this conversion and being able to see better when I have to drive my GN at night.
The H1 housing is the one you need for High beams. It doesn't have the diffuser in it so it results in a better spread light with no cut off. I've heard people have used the H4 LED bulbs for high beam and just cut or bent the one tab back since high beams are only 2 prong. The bulbs I am going to try are Part# B07H8MF2RH , they are H1 LED's and have the correct 2 prong wiring.
Please clarify exactly what needs to be ordered. I ordered Hella #3177001 - just housing and dust boot. You listed Aukee bulb # - does that come with wiring ? Do I need 2 of that Aukee # or 4 ? I just installed Sylvania Silverstars - so very little to no difference from my 34 year old original bulbs. Thank you
The Aukee kit comes with 2-H4 Low beam LED bulbs in the box so you just need to order 1 of that part# X002SIHOUH. Wiring is part of the bulb assembly. I just did the low beams for now, and they were plug and play. I haven't found the Hella H1 high beam housings for a good price yet, but will switch to them eventually. You won't regret switching to the LED low beams. Let me know if you need any more info.
@@jofalltrades1816 Thank you very much. I just placed order for the 2nd housing and bulb set. Please advise if you see good price on the high beam housings, and which bulb set. I’m looking forward to this upgrade - my 87 GN is pretty much stock, and still original paint.
@@richwarner8403 nice! This is definitely the best look for stock. Hard to tell they are upgraded until you see how well and how far they light up the road!
@@richwarner8403 I believe the highs are H1 housings and the cutoff is different. I dont think there is a diffuser in the H1 housings. It would be very bright for sure.
Thank you for sharing! I’m going to purchase this kit for my 1984 Hurst Olds!
Nice! you will like them!
Thanks for the video. Ordered the same parts and installed on my 87 turbo t. I cut the holes on the dust boots that came with the Hella stuff larger to fit past the led heat sinks to try and keep the dust out. I also like the OE look
Not bad. Yes the technology has come a long way. It’s amazing how the simple things can get ya goin’
took it for a night drive, the difference is staggering. Nice to see again
I like the GNX rims you've got on your grand national
Thanks for posting this, I was close to going with the JD units because I wanted LEDs but I am going to give this a go since I already have the lo beam housings. Should have them installed this week.
Nice! Let me know how it goes. I don't mind the black housings on these cars but I'm more partial to stock looking lghts that preform like a newer vehicle.
@@jofalltrades1816 Got them in and aimed them today, I haven't driven it a night yet but the install was easy and quick.
Thanks for the video, however, I can't order the bulb kit to the US. Do you know of another option?
Thanks for the info great job
Thank you!
wow, we got the same plates in different states, lol!
lol, nice brother!
Great video. Can you send the info on where you purchased the kit including the plug and play harness and LED bulb info? Thank you.
Thanks! Links to the lenses and bulbs are in the video description.
Housings are: Hella H4 Part# 3177001.
LED bulbs are: Aukee 6000k 50 watt LED, Part# 659516951940
Since they are 50 watt bulbs and they come with the conversion as part of the wiring, there was no additional harness needed. Just plug and play!
Gorgeous Grand National
Where can I get this set up for my 87 monte carlo ss? Your version is so much more simple compared to everyone else
Great video - thanks for posting. Where did you order the kit/components ? Thx
Thanks Rich! All the components came from Amazon. The price on the Hella lenses seems to jump up and down but it was great at the time.
I ordered the light bukbs u have in link but there not the one's u have there try using the number u put up for someone else that had the same problem but cant find them at all
Great video. I actually bought this same kit, 4-headlight housings (high and low beams) and led bulbs, thanks to your recommendation. The low beams plugged in directly just like you showed in your video. The high beam connector from the harness on the car is a 2 prong connector and the led bulb is a 3 prong. I can notch the plastic connector to on the harness to plug in the led but will that effect it in anyway?
Thanks! Notching the plastic connector is no problem since that top prong is for low beam light and will not be used anyway. You may have to switch the green and black wires around in the high beam connector for all 4 to work properly. I'm about to do mine as well.
So stupid question, to do all 4, I just need 4 housing and and 2 packs of the bulbs, the bulbs look like the come 2 in a pack, or do I need a different bulb for the inside or high beam light?? Hope that makes sense
Great question. What I do know is Hella makes a H1 housing for high beams that might diffuse the light a bit differently than the H4. The bulbs would all be the same, 50w LED. I do intend to add the H1's to mine but was waiting for the price to come down and wanted to get the low beams in first to drive at night this summer. So far so good!
When you do your high beams, what Hella housing will you use ?
You said you thought the H1 housing might reflect differently.
Can I use the same H4 Hella (3177001) for high beams, and then use the H1 Aukee conversion ?
If so, would you know the correct Aukee p/n ?
Thank you very much - I’m really looking forward to doing this conversion and being
able to see better when I have to drive my GN at night.
The H1 housing is the one you need for High beams. It doesn't have the diffuser in it so it results in a better spread light with no cut off. I've heard people have used the H4 LED bulbs for high beam and just cut or bent the one tab back since high beams are only 2 prong. The bulbs I am going to try are Part# B07H8MF2RH , they are H1 LED's and have the correct 2 prong wiring.
With the four led bulbs, is the upgraded headlight harness not needed?
Have any night shots?
Please clarify exactly what needs to be ordered.
I ordered Hella #3177001 - just housing and dust boot.
You listed Aukee bulb # - does that come with wiring ?
Do I need 2 of that Aukee # or 4 ?
I just installed Sylvania Silverstars - so very little to no difference from my 34 year old original bulbs.
Thank you
The Aukee kit comes with 2-H4 Low beam LED bulbs in the box so you just need to order 1 of that part# X002SIHOUH. Wiring is part of the bulb assembly. I just did the low beams for now, and they were plug and play. I haven't found the Hella H1 high beam housings for a good price yet, but will switch to them eventually. You won't regret switching to the LED low beams. Let me know if you need any more info.
@@jofalltrades1816 Thank you very much. I just placed order for the 2nd housing and bulb set. Please advise if you see good price on the high beam housings, and which bulb set.
I’m looking forward to this upgrade - my 87 GN is pretty much stock, and still original paint.
@@richwarner8403 nice! This is definitely the best look for stock. Hard to tell they are upgraded until you see how well and how far they light up the road!
@@jofalltrades1816 If there us that much difference, I wonder how putting another set of H4 in place of factory sealed beam highs, would work.
@@richwarner8403 I believe the highs are H1 housings and the cutoff is different. I dont think there is a diffuser in the H1 housings. It would be very bright for sure.
How many Flasher units are there? 1 or 2? After led conversion the 4 ways flash but directional will not blink.
I keep getting water in my lenses some setup any suggestions
Order the light bulbs and it’s not what you have i don’t have the the silver piece in the middle
that is strange. Is that the piece that sits in the light housing?
It’s just a led light and a plug nothing like you have
What’s the part number
@@ronaldpursley4232 Aukee H4 LED 50w, 6000k. There is a link in the description of the video to the bulbs on Amazon
found the part# on the box: X002SIHOUH.
What size are the front tires on your GN ?
fronts are 245 50 16, old school. Not much avail in a 16"tire anymore.
@@jofalltrades1816 perfect 16 inch size. GNX was fitted with those. As many others of the 80’s.
Caprice 77 dont work hella h4
Smdh.