I am so glad I found this video! I need videos that get to the point with no blah, blah, blah. (I am now following all things 'Crafting a Lovely Life'.)
This is one of the better tutorials I've watched. I appreciate that it's all straight to the point & doesn't have too much extra stuff on there. Thank you! :)
I watched like 3 hours of videos on how to make stickers and yours was the first one I understood thank you :) and these stickers are cute love the colors 😊
Hello! Thank you for this. Can't believe I actually had the products on hand. I was asked to make 14 cups and the last thing I wanted to do was weed and layer. Did you test the cups underwater.I know you really shouldn't submerge most waterproof items - but with kids - I'm not sure if they will follow directions. Thanks!
You're welcome! I have submerged them under water and they do just fine. I wouldn't recommend doing that for a long period of time or frequently, but they do well if that happens occasionally or during handwashing.
I hope this message get seen!! I love your explanations and so easy to understand! I want to make individual kiss cut stickers, how would I do that?? I would like them on a square background like a sticker sheet but for each individual sticker :) TIA!!!!
Awesome! Thank you very much for the definitions. I didn’t know what was a kiss-cut sticker and this is really helpful since I’ve been using laminating sheets on top of the sticker paper since I haven’t found a nice waterproof paper. Whenever I wanted to cut with cricut was either cutting too deep or not enough.
Great video! I'm new to cricut and sticker making, I have a maker 3 and I've been trying to make die cut stickers but the edges are jagged and it rips and lifts the laminate around the edges... any pointers to get a nice clean cut? I've tried different sticker papers and laminate sheets different settings and my blade and mats are new and clean. Thanks
I’ve had the same u didn’t flattery the images with the offset I think that caused it. Also I cannot contour the offset now for some reason on basic cut or print then cut
I have not tried it, but using a material setting that is for a thicker material could definitely do the trick. I would be a little nervous about it cutting through my mat so if you try it just be careful of that. :)
If you are wanting to cut out the individual letters and design elements, then you will need to remove the offset layer and then just cut it like you normally would for any other project. If you are wanting each word to be together in one sticker, then you would need to put an individual offset layer around each word. Hope that makes sense. 🙂
Just curious about how waterproof this method is? I use the same laminating sheet but a different sticker paper and it tends to run when I run it under water (like rinsing a cup/bottle). Maybe I need vinyl sticker paper instead of regular? Thanks for the video on kiss-cut, I've been trying to figure that one out.
Hi Serena, I have not had the problem of the ink on the sticker running. The laminating sheets protect the sticker paper I am using quite well. I've used this method for water bottles and as long as they are hand washed they have lasted me a long time. I'm so glad the tutorial was helpful!
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
The simplest & easiest tutorial I have ever seen 🌹thanx a million 🥰
Hi I just subscribed. I love that you just talk quickly effortlessly and get the job done. No fluff in between. Thank you
I'm so glad you like my tutorial style. I worry sometimes that I talk too fast, but have a hard time slowing it down haha!
I am so glad I found this video! I need videos that get to the point with no blah, blah, blah. (I am now following all things 'Crafting a Lovely Life'.)
Thank you so much, Kimberly! I'm so happy to hear that you like my tutorial style. ☺
Yes!! Well done. Some videos I find have way too much talking about other stuff. Thank you for a great informative video!
This is one of the better tutorials I've watched. I appreciate that it's all straight to the point & doesn't have too much extra stuff on there. Thank you! :)
I'm so happy to hear that you enjoyed this tutorial! Thanks so much for sharing! :)
THANK YOU for this tutorial! I have watched so many and had no luck getting the stickers to cut right. Your video is fantastic! Thank you so much!
I'm so glad it was helpful!🙂
This was the best and easiest tutorial I have found. Thank u
I'm so glad it was helpful! 🙂
I watched like 3 hours of videos on how to make stickers and yours was the first one I understood thank you :) and these stickers are cute love the colors 😊
Thank you! I'm so happy to hear that you found this tutorial helpful!🙂
Great directions!!!!
Thank you! I'm glad it was helpful!
Thanks for showing both ways, very helpful to have a visual
You're welcome! I'm so glad it was helpful! ☺
Thank you so much for making this tutorial. It's very well done. I got the info I needed. Concise and to the point. You rock!!!
Thanks so much for your kind words! I'm so happy to hear you liked the tutorial!
LOVE IT, THANK YOU.
Glad you enjoyed it! 🙂
Hello! Thank you for this. Can't believe I actually had the products on hand. I was asked to make 14 cups and the last thing I wanted to do was weed and layer. Did you test the cups underwater.I know you really shouldn't submerge most waterproof items - but with kids - I'm not sure if they will follow directions. Thanks!
You're welcome! I have submerged them under water and they do just fine. I wouldn't recommend doing that for a long period of time or frequently, but they do well if that happens occasionally or during handwashing.
Great tutorial!!! Thank you for sharing!
Thank you! You are very welcome!
That was very helpful Thank you!
You're welcome! I'm glad it was helpful for you!
THANK YOU SO MUCH!! I TOTALLY APPRECIATE YOU
You are very welcome! I'm so glad you enjoyed it! ☺
Great tutorial! I'm new to this and the kiss-cut vs. die-cut was something that was confusing in other videos. Thank you!
Thank you! I'm so glad you found it helpful!
I hope this message get seen!! I love your explanations and so easy to understand! I want to make individual kiss cut stickers, how would I do that?? I would like them on a square background like a sticker sheet but for each individual sticker :) TIA!!!!
This is a very helpful Tutorial 😍 thankyou so very much 🙏🙂
I'm so happy it was helpful to you! ☺
Thank you for your tutorial
You're Welcome!
Awesome! Thank you very much for the definitions. I didn’t know what was a kiss-cut sticker and this is really helpful since I’ve been using laminating sheets on top of the sticker paper since I haven’t found a nice waterproof paper. Whenever I wanted to cut with cricut was either cutting too deep or not enough.
You're welcome! I'm glad the tutorial was helpful to you!
I really love these stickers, thanks for this 🥳🤩 I’ve got some printable vinyl, just might make these tomorrow 👏🏼👏🏼💗
I'm so glad you enjoyed it! I hope you get a chance to make some! :)
such a great tut, thank you
You're welcome! I'm so glad you liked it! :)
Great video! I'm new to cricut and sticker making, I have a maker 3 and I've been trying to make die cut stickers but the edges are jagged and it rips and lifts the laminate around the edges... any pointers to get a nice clean cut? I've tried different sticker papers and laminate sheets different settings and my blade and mats are new and clean. Thanks
I’ve had the same u didn’t flattery the images with the offset I think that caused it. Also I cannot contour the offset now for some reason on basic cut or print then cut
For die cut stickers, Is there a setting that will work with only one cut? I think I have used craftboard
I have not tried it, but using a material setting that is for a thicker material could definitely do the trick. I would be a little nervous about it cutting through my mat so if you try it just be careful of that. :)
I use the Magnet Sheet 0.5 mm and then change the pressure to more and it works great.
I tried to type up my own stickers in DS and it was trying to cut out the actual words not the offset around it? Any suggestions?
If you are wanting to cut out the individual letters and design elements, then you will need to remove the offset layer and then just cut it like you normally would for any other project. If you are wanting each word to be together in one sticker, then you would need to put an individual offset layer around each word. Hope that makes sense. 🙂
Watching this a year later and i have the epson 2840 and i still have that problem with the matte cricut sticker paper. But glossy is fine!! So weird.
Just curious about how waterproof this method is? I use the same laminating sheet but a different sticker paper and it tends to run when I run it under water (like rinsing a cup/bottle). Maybe I need vinyl sticker paper instead of regular? Thanks for the video on kiss-cut, I've been trying to figure that one out.
Hi Serena, I have not had the problem of the ink on the sticker running. The laminating sheets protect the sticker paper I am using quite well. I've used this method for water bottles and as long as they are hand washed they have lasted me a long time. I'm so glad the tutorial was helpful!
Nice tutorial, thank you. The stickers are very fun and festive, love the colors.
Thanks so much! I'm glad you like them!