Build 18650 Li-ion Solar Power Bank with LED Light
ฝัง
- เผยแพร่เมื่อ 1 ม.ค. 2021
- Powerbank Kit: bit.ly/3hz4T0t
18650 Batteries: bit.ly/2MqYTeK
SUNKKO 737G Battery Spot Welding Machine:
• SUNKKO 737G Battery Sp...
Subscribe LahisTech: bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you. - แนวปฏิบัติและการใช้ชีวิต
![[TH] 2024 PMSL SEA W2D4 | Summer | โอกาสสุดท้าย ของสัปดาห์สอง](http://i.ytimg.com/vi/aswciGrYovo/mqdefault.jpg)
Always make sure the cells are at the same voltage before connecting them in parallel. If some cells are fully charged and some are empty, a large current can flow and damage them.
For 18650 ion batteries, look at the following: 1) batteries must be the same model 18650 2) the same voltage 3.7V 3) the same capacity (battery capacity is expressed in mAh)
আনেক শুভ কামনা
sir💯💯💯💯💯💯💯💯
youre Professional...Bravo.
Super 👏👏👏
DIY kit with rocket fire 18650s and NO INSTRUCTIONS, WARNINGS OR FUSES. Fun for the whole family.
uh oh
Anyone..... What were the washers that were put on top of the batteries before spot welding the Nickle strip? any links to buying them?
Thanks
That's was easy to do . I done mine last 2 months
This kit does NOT come with battery terminals or wires?
Superb
Good product
How many mah power bank made sir... How many times does a 5000mah battery charge?
nice👍
Nice🙏
What is the name of machine you used to joined the battery using thin plate where did you buy that including the USB volt meter reader
Thank you
wow
Whear can I buy the product tell me plz
How many screws are in the bag? I counted 11 each in my four kits I bought. I also think that each battery should be brand new from the same manufacturer, and charged before construction begins with a BMS charger because there may not be a control circuit in the 18650 batteries you buy from China. Sometimes they are not very truthful. Charge on a 5P setting, keep your wires or solar tabbing as short as possible.
👌👍
Are you read on egypt to keet power bank
GOOD
👍👍👍👍👍
In the video you showed how you assembled solar power. When you connect the red and black electric wire from the LED light, you soldered the red wire to the SUN contact - and the red electric wire from the LED light goes to the LED +. You have three types of connectors on the module for your Solar Power Bank: 1) B + and B- are the battery connectors 2) SUN + and SUN- are connectors for the solar panel 3) LED + and LED - are connectors for LED light that is for printed circuit board to 20 SMD LEDs.
Can you recommend a better kit for us? If yes, link, please.
Buenas tardes o noches una pregunta dónde puedo conseguir e sa batería que se arma
Where to purchase kit. Please send link
Yo te go uno de esos de fábrica y no me duró jaja
Nice
Bhot umda
th-cam.com/video/X1VS-8WFBvE/w-d-xo.html
I lika thes
You forgot to prove the solar panel if it works.
That would depend on your meaning of "works" is. It might "work" if it were in the sun for weeks." I think most of the solar power , would go to running the 4 lights that "indicate it is working".
Ok 👌
👍
My Solar Charger Is A Little Thinner
Then That one You Have. I Tried Using
A 4 Cell AA Battery Holder But It Was
Too Big So I'll Have To Use A 4 Cell AAA Holder
not made for AA OR AAA. thin ones take the flat square lithium batteries.
Keep doing what you do best you shall make it
True!
Hi Guys 😍💋 💝💖
كم ميلي أمبير مجموع البطاريات وكم خرج لوح الطاقة الشمسي بالميلي أمبير .الرجاء الرد
Instead of music you should explain orally. More over in fabricating most important is 6 connections
and there should be details and close up as well write to understand easily.
If you look at the video carefully you can understand that I’m showing the 6 connections in detail with a closeup.
Don't agree, shreepatrao kamde. This video can be watched and understood by ANYONE regardless of language. (Yes, the video has problems--see my comment above--but soundtrack isn't one of them.)
Why aliexpress is not working?
it's working
Please tell
But the Solar Panel cant Carge anything..
I've built a few of these, and you're right. The LEDs that indicate that the cells are charging by solar consumes more energy than the panel produces. One improvement I might try is to disconnect those LEDs, and test whether the solar panel can maintain the cells at full charge over time as they slowly self-discharge.
I don't like the kit that you used. Sorry.
1. Far too much adhesive tape and hot glue involved in the assembly. I was waiting for chewing gum and baling wire to appear next. Quite frankly, in a good kit, ZERO adhesive tape and hot glue should be necessary.
2. Which dumb design provides screws to secure the pieces of the case, but provides absolutely nothing to secure the internal components. Wow.
Lovely 😍💋 💝💖❤️