How to Replace Tail Light 93-95 Toyota Corolla
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Buy Now!
New Tail Light from 1AAuto.com 1aau.to/ia/1ALT...
1A Auto shows you how to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped taillight. This video is applicable to the Toyota Corolla, years 93, 94, 95, 96, and 97.
This process should be similar on the following vehicles:
1993 Toyota Corolla
1994 Toyota Corolla
1995 Toyota Corolla
1996 Toyota Corolla
1997 Toyota Corolla
🔧 List of tools used:
• 10mm Socket 1aau.to/ouB/1AX...
• Ratchet 1aau.to/oAo/1AX...
Subscribe: / @1aauto
Check out our playlist:
How to Install Tail Lights From 1AAuto.com: • How to Install Tail Li...
Toyota Auto Repair Videos: • Toyota Auto Repair Videos
Toyota Corolla 1993-1997: • Toyota Corolla 1993-1997
For More Info visit us at 1aau.to/h/L2/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
"√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*"
@cheryblosom Thank you for visiting our auto repair channel on TH-cam.
You may want to check the fuses to see if one is burnt out. You may also want to check the door jamb switch to see if it's working correctly or needs to be replaced. 1aauto.com 888-844-3393
Often, these videos leave out parts that are important for non technical people like me, but this one was wonderful. Was able to change the light bulb myself. In case anyone else has a problem of getting the outside housing off, one must pull out mostly, not wiggle back and forth. Took me a little bit of time to figure that out. The auto parts guy couldn't figure it out. Kind of funny. :)
The issue could be related to either with the socket or it could be the wiring for the brake light itself at this point.
thank you! from the bottom of my heart i did this myself and i saved a trip hahah ❤
@aj wareham If it uses the stock nuts it will be a 10mm. Hope this helps!
888-844-3393 1aauto.com
Just got an older Corolla with some burnt out lights - Not an extremely technical operation, but I appreciate your style showing ALL of the pertinent details. A lot of car videos would have simply said "Take out the tail light assembly" and merely shown how to twist out the old bulbs! Thanks!
Dude, You guys Rock. Just saved myself more than $50 having someone else do the job for me.I Subscribed and put ya in my Favs.
Test the power to ther socket with a test light. If there's power to the socket and the bulb is new, the socket could be bad. Hope this helps you out, Have a great day! 1aauto.com 888-844-3393
Also make sure that the wire is disconnected. Once everything is removed you can try to wiggle it back and fourth as you pull on it and it should come right out for you.
You're welcome. Have a great day! 1aauto.com 888-844-3393
Thanks for watching. 1aauto.com 888-844-3393
If the two bolts on the outside are stripped you may need to find something that will clamp onto them so that you can remove them. A set of needle nose Vise Grips might possibly work.
Thanks for this! Only used to working on the Nissans I've owned but my moms Toyota needed a fixin'. Very easy to understand this video
Great explanation man! Just switched out the bulb super quick. Thanks =)
My light comes in next week. You make it look easy! Fingers crossed.
I use your videos all the time and just wanted to say thank you.
Thank you for this video it helped me change my brake lights. I have a 1998 Corolla.
+BluePanda Thanks for checking us out. 1aauto.com
Yeah, thanks for breaking it down. Seems easy, just a little timely, to replace.
Hey! I love these videos they help out ALOT! I had a quick question for you though. In my 1993 Toyota Corolla, the interior (I believe its dome) light works on the "ON" position, but does not work on the "DOOR" position. Regardless of the door it does not go on! Any suggestions? Thank you for your help!
Changing the brake light bulb, I didn't need to disconnect the wire from the clip at all. The light panel tilted back enougn.
What about a trunk panel replacement? (that goes between the taillights)
This video helped a lot. Thank you
How do u remove the middle piece on the trunk lid that is between the tail lights?
Very Informative.
The instruction is quite clear, but I have not been able to remove the bulb
housing. In which direction the housing needs to be pulled out, for not to break it?
Any pointers would be appreciated.
Thanks
If you follow this video you should be fine.
Great and easy to follow video. Very helpful. You guys are awesome. Thank you so much!
+Ireact 2events No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393
Respect and wish you guys best.
The socket is rusty and I'm unable to push the bulb to remove. It won't budge, I fear I might break the glass. What should I do?
Thanks for the video
Great vid, thanks!!
Thanks guys, love your videos.
Thank you for watching!
888-844-3393
thanks
Totally worked! thx for your help!
Thank and godblesssing ❤
Is this pretty much same process for removing 1989 corolla sedan rear tail light cover?
+The Rager We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
hi im trying to install after market tail lights on my corolla instead of replacing it with the original ones do you know what the exact size tool i need to buy to remove the back nut
Thank u
Changing my brake light, i unscrewed the 3 bolts but i cant get the light out, seems to be stuck where the black pins are on the outside. I dont want to force it but how do I get the light out??
Thank you, that helped out a ton
Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393
How do you get the inside cover off in the first place?
I have the same problem on my left brake light. I tried to wiggle it back and fourth but still no luck. Have your problem solved?
Thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank for you for the help.
I changed my right inner brake light but it still won't come on, all of the other lights work except this one. Any suggestions?
Thank you
+kjjmusic You're welcome! 1aauto.com 866-403-3393
perfect
Was very helpful! thanks!
+Peter Ernst Our pleasure! For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/1A/TailLights/Toyota/Corolla/1ALTP00045?TH-cam&CTA%20Comment&ATony
Perfect! So much appreciated!
Thank you!
Apparently I was doing it correct but my wire connectors are stuck
thanks for this
but whats the BULB NO.1156? 2057??
so helpful!!awesome
Thanks!
Thank you for watching!
888-844-3393
The two screws on the outside are completely worn out and my screwdriver won't work.
Advice?
thank you
bassirou ndiaye Thanks for watching 1aauto.com 866-403-3393
Thanks a lot!
Thank you for watching.
1aauto.com 888-844-3393
Thank You
You're welcome! 1aauto.com 866-403-3393