What’s your experience using this pump on a shallow well? The manual sais it can pull water from 26’ deep.. I’m my situation I’d be about 20’ deep from pump to water surface..
I don’t know of any of our clients who have done that with this pump, but they have used smaller versions of the ESYLINE pumps to lift water. While it does have the ability to lift a maximum of 26 feet, I don’t ever like to test the limits of a pump’s lifting capability. It’s my understanding that it will significantly reduce the flow rate if it must lift the water before pushing it.
How much electricity will the 110 volt dab unit use. Client claims herr electric bill went up several hundred dollars. She lives alone so I don't feel it is the pump.
Since this pump is dual voltage 115/230V... 9.6 Amps at 115V 4.8 Amps at 220V They are very energy efficient due to the soft start feature and the fact that the motor speeds up/down based on use.
Hold down the “mode” and “set” buttons simultaneously for about 3 seconds. When PSI begins to flash, use the up or down arrows to select the desired pressure, and press “set” button. That’s it.
How do you change the pressure vessel onsite? There doesn't seem to be any info in the manual
What’s your experience using this pump on a shallow well?
The manual sais it can pull water from 26’ deep..
I’m my situation I’d be about 20’ deep from pump to water surface..
I don’t know of any of our clients who have done that with this pump, but they have used smaller versions of the ESYLINE pumps to lift water. While it does have the ability to lift a maximum of 26 feet, I don’t ever like to test the limits of a pump’s lifting capability. It’s my understanding that it will significantly reduce the flow rate if it must lift the water before pushing it.
How much electricity will the 110 volt dab unit use. Client claims herr electric bill went up several hundred dollars. She lives alone so I don't feel it is the pump.
Since this pump is dual voltage 115/230V...
9.6 Amps at 115V
4.8 Amps at 220V
They are very energy efficient due to the soft start feature and the fact that the motor speeds up/down based on use.
How to set presure automatic smart1,5 dab
Hold down the “mode” and “set” buttons simultaneously for about 3 seconds. When PSI begins to flash, use the up or down arrows to select the desired pressure, and press “set” button. That’s it.