I bought one of these 2 weeks ago for my first pcp. I was pleasantly surprised, with the quality and yes the mags are tough ive dropped mine more than a few times and work fine
i took the adjustable part of mine off the stock and just added a neoprene stock sock on the butt to reduce the length of pull.if your wearing a coat etc you dont notice any discomfort from the now harder stock
Thats a good idea ,personally i have found all of these rifles with the bottle on the back difficult to get along with ,length of pull and correct eye relief on scopes
@@fieldsportcymru4636 i guess they are what they are.cheap and fun,i think you can fit a verminator stock cover which will give you a higher cheek weld or you could glue sections of neoprene on top of the bottle till it feels right,but you just cant get away from the width of that bottle.i just bought mine for ratting,it's short and pointable and the plus on the bottle is ofcourse the shot count....if you dont like the marine and i must admit mine is and wasnt keen at first,you could always experiment with a hydro dip kit.theres tons on ebay,worth having a go on such an affordable rifle??
@@fieldsportcymru4636 I totally agree on being crude!im yet to put it back together(will do today) but ive put a baby bottle brush head in the air cylinders to try and stop that church bell ping resonanting through the back cylinder and coated the hammer spring with molly grease hoping thatll stop the scraping along the hammer housing and thought of adding just a slim piece of rubber to where the cocking lever strikes the action front and back,with it being spring loaded it slams open and shut as im sure youll know.(its a bit wobbly to say the least too)...another thing to watch out for is the machining.it'll slice up your Orings,i've had to get some needle files and take the burrs off any ports that have never been tidied up,they just drilled through and they left them as is....."anihilatorairguns" on here have done some good tuning vids on the puncher which is basically the same gun...if you want to get to anything in it,there's 3 anti tamper screws to contend with,also the "true trigger"at the back is glued/thread locked in,you'll need to heat up where it is to remove it to get to the hammer spring lock nut.(that is also a anti tamper screw)you'll need a 3mm drill bit and a reverse thread bolt remover to get that out,it's quite easy though...if you want to de-gas it to save you researching,if you use a 7/8'' 12 point socket to slowly loosen the pressure gauge.save you dry firing the air out which takes f@ckin ages!haha..i know from experience! :)
just a quick update..the molly greas does work and stop the scraping of the hammer spring.the depinger has worked a bit but i think its from the hammer strike mainly so a thin strip of rubber between the bottle block might stop it resonating through..its just a bit annoying when your ratting.
Hi, thanks for the information. I am hoping to get one of these in the future. I was thinking of getting a 4 litre air filling bottle. Do you think that this size of tank will be big enough. I only intend to shoot one day per week with perhaps a bit of plinking in the garden. Thanks for your advice. I have subscribed and look forward to viewing your channel.
Hi there, thanks for the excellent info. Just a quick question, I have heard that the bottle stock is quite long and a bit of a stretch for people with shorter arms. I am 5'8" so will this be comfortable in the arm and not a stretch to the trigger in your opinion? Many thanks. MMMD
To be honest it may not be , im short but have long arms ,like an ape my girlfriend says lol and i found it just about shootable but i did struggle with setting a scope up due to eye relief. Thats the only down side
@@fieldsportcymru4636 Thanks. I should have said I am currently using a Remington Express "classic shape" rifle springer and seem to find that to be ok. I was dead set on getting the NP02, they seem so good for the price. MMMD
Paul what do you think of your Kral Puncher Breaker. Can you do a video on it, I would love to see you shoot some groups with it. I have a 25 caliber Puncher Breaker I bought a few years ago from Troy Hammer and he's good tuning these Krals. I actually gave it to a buddy of mine that was diagnosed with cancer and he gave it back to me because he bought a dreamline. I actually don't know what I'm gonna do with it now because I have the leshyi and leyla and thats all I need. Do you know anyone that might be interested in one. But im curious what you think of your puncher breaker buddy.
@@fieldsportcymru4636 no mine isn't sub 12 but it has the power wheel on it that can be turned down to very low. I have the special Troy Hammer from Annilator Airguns version in 25 caliber marine one with a 10 by 50 UTG scope with big side wheel and is illuminated with a UTG riser under it, and 3 magazines in 25 caliber with a Donny FL Tatsu moderator and a UTG rubber coated bipod. Plus a 200 dollar Piano gun case with it cut out to fit the Puncher Breaker perfect. Plus the real good after market titanium cocking lever. All for 550 dollars. Oih and a Benjamin hand pump also. I have 1500 into everything I just said and I would let it go to you for 550, its a steal, its in brand new condition everything.
How long does this take? I recently saw a post about people who have managed to order better seals from kral, thinking I'll get some in advance as recently got this gun
I bought one of these 2 weeks ago for my first pcp. I was pleasantly surprised, with the quality and yes the mags are tough ive dropped mine more than a few times and work fine
I just couldnt get the right eye relief on a scope .
I've just bought one ( cos I don't want to use my hw100/Daystate revere to pull apart to see how it works 🤔)I'll be seeing what mods are available.
Could you do a video of the dismantling of the rifle please?
It's awesome you also get the mid range airguns as well as the more expensive ones and review them!
Yes i do , ive got a new ish to the uk rifle in the low to mid price range coming next week
i took the adjustable part of mine off the stock and just added a neoprene stock sock on the butt to reduce the length of pull.if your wearing a coat etc you dont notice any discomfort from the now harder stock
Thats a good idea ,personally i have found all of these rifles with the bottle on the back difficult to get along with ,length of pull and correct eye relief on scopes
@@fieldsportcymru4636 i guess they are what they are.cheap and fun,i think you can fit a verminator stock cover which will give you a higher cheek weld or you could glue sections of neoprene on top of the bottle till it feels right,but you just cant get away from the width of that bottle.i just bought mine for ratting,it's short and pointable and the plus on the bottle is ofcourse the shot count....if you dont like the marine and i must admit mine is and wasnt keen at first,you could always experiment with a hydro dip kit.theres tons on ebay,worth having a go on such an affordable rifle??
@david woodward Agree for the money their rather good accurate full power and tough but just a bit crude ,but as a tool for ratting their 👍
@@fieldsportcymru4636 I totally agree on being crude!im yet to put it back together(will do today) but ive put a baby bottle brush head in the air cylinders to try and stop that church bell ping resonanting through the back cylinder and coated the hammer spring with molly grease hoping thatll stop the scraping along the hammer housing and thought of adding just a slim piece of rubber to where the cocking lever strikes the action front and back,with it being spring loaded it slams open and shut as im sure youll know.(its a bit wobbly to say the least too)...another thing to watch out for is the machining.it'll slice up your Orings,i've had to get some needle files and take the burrs off any ports that have never been tidied up,they just drilled through and they left them as is....."anihilatorairguns" on here have done some good tuning vids on the puncher which is basically the same gun...if you want to get to anything in it,there's 3 anti tamper screws to contend with,also the "true trigger"at the back is glued/thread locked in,you'll need to heat up where it is to remove it to get to the hammer spring lock nut.(that is also a anti tamper screw)you'll need a 3mm drill bit and a reverse thread bolt remover to get that out,it's quite easy though...if you want to de-gas it to save you researching,if you use a 7/8'' 12 point socket to slowly loosen the pressure gauge.save you dry firing the air out which takes f@ckin ages!haha..i know from experience! :)
just a quick update..the molly greas does work and stop the scraping of the hammer spring.the depinger has worked a bit but i think its from the hammer strike mainly so a thin strip of rubber between the bottle block might stop it resonating through..its just a bit annoying when your ratting.
Hi, thanks for the information. I am hoping to get one of these in the future. I was thinking of getting a 4 litre air filling bottle. Do you think that this size of tank will be big enough. I only intend to shoot one day per week with perhaps a bit of plinking in the garden. Thanks for your advice. I have subscribed and look forward to viewing your channel.
Yes should be plenty big enough
@@fieldsportcymru4636 Thank you.
Hi there, thanks for the excellent info. Just a quick question, I have heard that the bottle stock is quite long and a bit of a stretch for people with shorter arms. I am 5'8" so will this be comfortable in the arm and not a stretch to the trigger in your opinion? Many thanks. MMMD
To be honest it may not be , im short but have long arms ,like an ape my girlfriend says lol and i found it just about shootable but i did struggle with setting a scope up due to eye relief. Thats the only down side
@@fieldsportcymru4636 Thanks. I should have said I am currently using a Remington Express "classic shape" rifle springer and seem to find that to be ok. I was dead set on getting the NP02, they seem so good for the price. MMMD
@@MudMaxMetalDetecting They are very good for the money ,i suggest you try one before you buy if your a bit on the short side .
@@fieldsportcymru4636 Thanks buddy. MMMD
Whats the bottle like as a cheek piece please ? I've shouldered a verminator and didn't like it. . Whats this "something special?" Tell us quick ! 😃
Its pretty good , obviously not as good as a proper stock but you do get loads of air storage with this layout in a compact format
When you say not expecting much. What do you mean by that with comparison to others
Just in general but it surprised me this rifle as its solid and accurate though i did struggle with scope eye relief due to the rather long bottle
Paul what do you think of your Kral Puncher Breaker. Can you do a video on it, I would love to see you shoot some groups with it. I have a 25 caliber Puncher Breaker I bought a few years ago from Troy Hammer and he's good tuning these Krals. I actually gave it to a buddy of mine that was diagnosed with cancer and he gave it back to me because he bought a dreamline. I actually don't know what I'm gonna do with it now because I have the leshyi and leyla and thats all I need. Do you know anyone that might be interested in one. But im curious what you think of your puncher breaker buddy.
Is it sub 12 ? . Ive never shot one but i think its the same action and mags as this rifle
@@fieldsportcymru4636 no mine isn't sub 12 but it has the power wheel on it that can be turned down to very low. I have the special Troy Hammer from Annilator Airguns version in 25 caliber marine one with a 10 by 50 UTG scope with big side wheel and is illuminated with a UTG riser under it, and 3 magazines in 25 caliber with a Donny FL Tatsu moderator and a UTG rubber coated bipod. Plus a 200 dollar Piano gun case with it cut out to fit the Puncher Breaker perfect. Plus the real good after market titanium cocking lever. All for 550 dollars. Oih and a Benjamin hand pump also. I have 1500 into everything I just said and I would let it go to you for 550, its a steal, its in brand new condition everything.
@@johnnyventurino8947 That sounds like a bargain for someone out their mate 👍
@@johnnyventurino8947 ill buy it
Hoping the new rifle will be the Aselkon MX10 as I’d love to see a good review of it
Close its the mx8
@@fieldsportcymru4636 can’t wait for the review 👍
I use air arms supefield with mine
It's OK gun but seals go
How long does this take? I recently saw a post about people who have managed to order better seals from kral, thinking I'll get some in advance as recently got this gun