Thank you! I do have the config files included in the thingyverse link of the description. I'm not planning on a video, config files are so boring to talk about haha. I can advise you to look at the examples on the official Marlin page for the sidewinder and go from there if you want to reconfigure it yourself, or just use mine. Cheers!
Hey, great video, got a few ideas from it. Although I am using Klipper at the moment I am curious on how you has your touchscreen connected to skr 1.4T. Do you a diagram for the cable ? Thanks
There is a TFT output on the SKR board, just connect it to the screen with the existing white ribbon cable. Though you need to change the connector from a 2x4 dupont to a 1x4 in order to fit in the SKR board. I just got four dupont connectors from some breadboard jumper wires and jammed in a piece of paper next to them to make sure they don't fall out
Nice upgrade. Are you planning to add a BLtouch? I also want to add klipper with input shapper to get rid of ringing and ghosting but it seems harder than adding a BLtouch.
BLtouch would be nice, but don't really have too much first layer problems so not a priority. Input shaping is definitely beneficial for this type of printer, but don't see myself having the time to figure it out anytime soon. Do you know any documentation of people who did it for this printer?
I thought about something similar but I decided not to because of the WiFi reception, maybe I'll consider it again. One question, have you tried to utilize the integrated official display with something like OctoScreen?
Wat een MacGyver actie 🤣 De mijne heb ik ernaast staan in een kastje, is prima zo. Ij ga OctoKlipper installeren, dus ik denk niet dat ik een SKR 1.4 nodig heb. Voor automatisch uitschakelen heb ik een Sonoff S20 met een andere firmware zodat ik het via een octopi app besturen kan (Voor het uitschakelen van mijn printer). En daarbij een auto shutdown app voor octoprint zelf.
I have a Sidewinder X1 printer and I want to install SKR 1.4 + Raspberry Pi 4 Please help and I will send you money after trying the printer and it's ok
Thanks for this, it answered most of the questions I had. Did you use a wiring diagram or can you share one?
Why would you need a Pi when you have a 32-but main board?
Did it make a difference in print quality and speed? Also how much did you spend? Thanks in advance.
Great Video, describes exactly what i plan to do.
Maybe you can go into your Marlin configuration with the Sidewinder in a separate video? :)
Thank you! I do have the config files included in the thingyverse link of the description. I'm not planning on a video, config files are so boring to talk about haha. I can advise you to look at the examples on the official Marlin page for the sidewinder and go from there if you want to reconfigure it yourself, or just use mine. Cheers!
Hey Lars nice set up! Did you have any issues at all powering the Pi off the SKR after all this time?
No issues but you will need to get the dcdc converter to have sufficient power
Hey, great video, got a few ideas from it.
Although I am using Klipper at the moment I am curious on how you has your touchscreen connected to skr 1.4T. Do you a diagram for the cable ? Thanks
There is a TFT output on the SKR board, just connect it to the screen with the existing white ribbon cable. Though you need to change the connector from a 2x4 dupont to a 1x4 in order to fit in the SKR board. I just got four dupont connectors from some breadboard jumper wires and jammed in a piece of paper next to them to make sure they don't fall out
Nice upgrade. Are you planning to add a BLtouch? I also want to add klipper with input shapper to get rid of ringing and ghosting but it seems harder than adding a BLtouch.
BLtouch would be nice, but don't really have too much first layer problems so not a priority. Input shaping is definitely beneficial for this type of printer, but don't see myself having the time to figure it out anytime soon. Do you know any documentation of people who did it for this printer?
I thought about something similar but I decided not to because of the WiFi reception, maybe I'll consider it again.
One question, have you tried to utilize the integrated official display with something like OctoScreen?
hi can you help me to set my x1 ?? plz
What if you accidentally press the button???
awesome Work :) I'll do the same. Only the firmware is what a struggle with atm.
Wat een MacGyver actie 🤣 De mijne heb ik ernaast staan in een kastje, is prima zo. Ij ga OctoKlipper installeren, dus ik denk niet dat ik een SKR 1.4 nodig heb. Voor automatisch uitschakelen heb ik een Sonoff S20 met een andere firmware zodat ik het via een octopi app besturen kan (Voor het uitschakelen van mijn printer). En daarbij een auto shutdown app voor octoprint zelf.
Will this also be possible for the artillery genius?
I don't own one so I don't know if it fits, you might have to redesign the subframe.
I have a Sidewinder X1 printer and I want to install SKR 1.4 + Raspberry Pi 4 Please help and I will send you money after trying the printer and it's ok