My dad had square body it was a K20 and it's actually my profile picture anyway it was so loud that you could hear it a mile away and it had so much power to it that you could literally do drifts so easily so my dad was like what should we name it and I said the Beast so we stuck with the Beast and named it the Beast but he sold it to one of our family members and he's going to finish it off and I miss that truck it was a good truck
Less air pressure guys. Our truck spends a lot of time in the sand with Paddle Tires. We run them at 4 pounds the front tires at 8. If you’re going to do that, you need to run bead locks. If not running about 10 pounds. My Duramax is very happy at 10.
Isn't going to matter much with those gay wheels and low profile tires. There isn't enough side wall to flex, and the beads will pop off the rim if you air down because the wheels are too fat for the tires.
@@bdd1469 absolutely correct. They have lift street trucks with very little suspension travel, stiff suspension and completely wrong tires for that application. Granted I think they were out to have fun.
want to see it on a proper set of tires and wheels...35-37 on a 15-17 inch wheel so you have some sidewall and aired down to like 15 psi... street style tire wheel combo youve got on is just not really functonal in the sand
Aint no MF way either one makes 900 lmfao. Have a lb7 that made 806 and would wax that dmaxx and a square that made 760 and is a helluva lot more rowdy than that thing
Drove the truck 300 miles round trip just to go toy at the dunes. Had I trailered it down there, it would have went to the top. I promise you that. But I wasn’t TRYING to break it being I had to drive it home still.
Itll get painted eventually. Wanted to get the swap done and finish all fabrication work before it gets painted. No lift. Itll get lowered about 2" as i plan on racing with it this summer.
@@richardmathern900 We will be posting a video with the breakdown. Or go to his page and watch the last video of when i tore his trans down and then we went out and mobbed the truck around at my house. Its got better underhood shots.
I'm sorry.I'm not being rude but I don't think it's 900 horsepower.Either get up about halfway and then put some pedal in to it should Launch that truck over the top
hope you guys know that vehicles with a 100 hp are making you look silly, you don't need a ton of horses, you need torque gear ratio and less air in those wrong tires, Oh and what with the hats, i don;t see rain
Eh…you been to this hill? I’ve seen a bunch of stock trucks scooting around here and none got that far up. I agree with your first point though. All the hp don’t mean anything with that stiff suspension bouncing off every whoop, and the tires obviously aren’t helping
@@berrymucuckiner4890 man you salty, replying to almost every comment about wheels and tires when all we were out to do is have some fun😂 obviously our trucks aren’t purpose built sand trucks we just had an idea to go have some fun….
900hp would be better without those stagecoach donk wheels. Some boggers on 15" rims would be more like it. Why do people like the stupid donk wheels on a truck? You guys should wear skinny jeans and have a man bun to match the wheels.
15s wont fit on the truck. Its a K20 so 15s wont clear the brakes. Theyre only 20s on the truck. Hardly considered "donk" wheels.... Lol Everyones opinions are different, to each their own my guy.
@@brandonmurphy8491 ok my bad then 17 rims to clear the brakes and some 37×13.5×17 boggers. All rim and short sidewall is in my opinion is silly on a 4x4 looks like a donk car
I'm sorry, but you wish that was 900 horsepower.
Man the amount of trash comments and know it alls is next level. Trucks are awesome. Stay safe gentlemen.
Love a square body… nice truck
You guys are obviously new to the sand😂
Yes they are lol
At least they shared it 😅
My dad had square body it was a K20 and it's actually my profile picture anyway it was so loud that you could hear it a mile away and it had so much power to it that you could literally do drifts so easily so my dad was like what should we name it and I said the Beast so we stuck with the Beast and named it the Beast but he sold it to one of our family members and he's going to finish it off and I miss that truck it was a good truck
Less air pressure guys. Our truck spends a lot of time in the sand with Paddle Tires. We run them at 4 pounds the front tires at 8. If you’re going to do that, you need to run bead locks. If not running about 10 pounds. My Duramax is very happy at 10.
Psi doesn’t matter when running mall crawler/rubber band tires!
what motor and trans is that ?
Had some Tinkerbell music to turn down but nice multi colored Chevy. Sure beats pushing a ford.
I wish my truck had 900 hp and sounded that good
All the horsepower in the world would never be able to hook up on that roughness
So sick I would love to see the break down on the square body
Check out the video we posted yesterday on Coles channel for a full breakdown on it.
Box Chevy 💯🔥
Truck is a beast brother , I like it
What’s the rim and tire set up for the square body
Weld Daggers 20x12 -52 with Toyo M/Ts 33/12.50/20
The size is precisely…. Shit!
Needs more rubber and less air pressure and she’d really pull
By any chance was this taking in the sand dunes by Alamosa co. ?
Little Sahara in Utah.
what's the setup in the square body?
Not enough 🥱
you need to make the tire pressure at 15 to 10 psi that gone make the car better in the sand
Isn't going to matter much with those gay wheels and low profile tires. There isn't enough side wall to flex, and the beads will pop off the rim if you air down because the wheels are too fat for the tires.
@bd1649 💯
@@bdd1469 absolutely correct. They have lift street trucks with very little suspension travel, stiff suspension and completely wrong tires for that application. Granted I think they were out to have fun.
You guys should of had another tire and wheel setup to tryout like oldschool and go paddle tires they r for the sand dunes .
want to see it on a proper set of tires and wheels...35-37 on a 15-17 inch wheel so you have some sidewall and aired down to like 15 psi... street style tire wheel combo youve got on is just not really functonal in the sand
Love the mixed match goobered paint #FlyErHighOleSon
I am subscriber 849🇨🇦
STARS N BARS 💪🏻
Hell yeah terry
Cool Trucks,lot's of Power,more of this stuff Guys👌👍 i Love this shit 🤘😜
Is that 900 at the carb? 😅
Badass truck man
Cool shit man 🤘🏼
Seen a 50cc Honda cover more dunes than this thing
I think those duramax swaps r good with the squares.
Never knew the Jefferson’s made it so far up the East Side that they were into trucks!
Those tires and wheels sticking out absolutely slays me. Bout as bad as an assdragger. They're dumb as hell, dangerous and damage ur paint.
Centered close to the back of the truck it looks like there's a black plug that's in the box floor that should be your spot
Need some paddles it's getting no traction
Aint no MF way either one makes 900 lmfao. Have a lb7 that made 806 and would wax that dmaxx and a square that made 760 and is a helluva lot more rowdy than that thing
923hp @16psi E85 on the UCC dyno... Your gay ass LB7 dont scare me. Ill run that shitbox any day of the week!
@@brandonmurphy8491 🤣🤣🤣🤣 bring it bitch. I’m in PA, find somewhere halfway
I’d put money on that race bud.
That duramax would make you look stupid.
Hell ya
Scared of the right pedal?
Drove the truck 300 miles round trip just to go toy at the dunes. Had I trailered it down there, it would have went to the top. I promise you that. But I wasn’t TRYING to break it being I had to drive it home still.
That changes things lol
And I thought my 74 with a 5.3 swap was cool 😂😂😩
nice motors, how about some lift and paint!!
Itll get painted eventually. Wanted to get the swap done and finish all fabrication work before it gets painted. No lift. Itll get lowered about 2" as i plan on racing with it this summer.
Nice truck minus the gay AF tire and wheel package.
Highlight of the vid was watching them struggle to mount the flag
900 torque maybe my dodge is a 1000 hp and like 1400 torque
You guys forgot to air down! The truck would have done 10000’s better in the sand
The air tank we were going to borrow to re fill tires didn’t work out sadly 😂 so we didn’t have air
Yall wild
I would not even drive on that that looks terribly rough and uncomfortable it's been driven on too much
900 horse.. brother more like 700 the duramax is a different story
Right corner by the cab..there should of already been a hole.. looks like it's bondo.. u could of drill there.. lol. .
600 hp maybe
I was thinking less than that. I have 5 square bodies. I was waiting for the hood to open and let us see.
@@richardmathern900 We will be posting a video with the breakdown. Or go to his page and watch the last video of when i tore his trans down and then we went out and mobbed the truck around at my house. Its got better underhood shots.
@@richardmathern900 See the video we posted yesterday on the setup on the Squarebody.
I'm sorry.I'm not being rude but I don't think it's 900 horsepower.Either get up about halfway and then put some pedal in to it should Launch that truck over the top
Air down the tires your not a newbie bro.
Next time air down the tires
hope you guys know that vehicles with a 100 hp are making you look silly, you don't need a ton of horses, you need torque gear ratio and less air in those wrong tires, Oh and what with the hats, i don;t see rain
Que weva no le sacaron el pawer😜😜
Sure you guys don't want to claim it to be 9000hp....lol kids today don't even have a clue
Dyno vid will be up tomorrow
RHEC
helllo zoomer know it alls
Why would you put an ugly flag with no victory under it on a Beautiful truck
Should took the atc out 🤣
I wanted to but they’re all broken 😂
I Like the REBEL FLAG , MODERN DAY DUKES OF HAZARD , OH YEAH !!!
All that power is a waste.. I could climb that with a stock truck.. 8psi in the tires and 2 wheel drive your all set
Eh…you been to this hill? I’ve seen a bunch of stock trucks scooting around here and none got that far up.
I agree with your first point though. All the hp don’t mean anything with that stiff suspension bouncing off every whoop, and the tires obviously aren’t helping
🤣😂🤣
Pretty lame spinning street tires in the sand at 20 mph... Boring AF
Trucks cool that's flags trash tho
okay tell me you sat there and watch this whole thing
Did you? 😅
Don’t think many did… my 10Sec skip button got worn out on this one.
@@berrymucuckiner4890 man you salty, replying to almost every comment about wheels and tires when all we were out to do is have some fun😂 obviously our trucks aren’t purpose built sand trucks we just had an idea to go have some fun….
Strange that my truck sounds a lot better than these, and I am not close to 900 horsepower.
@@kylemathena1491 Got proof.
How the hell do I attatch video to this damn site?
Maybe he meant to say both of these trucks together make over 900hp. 🤔
@@dennissamford1029 upload a video to your page.
@@unapologeticallypatriotic3853 I imagine that is the problem. I guess I don't have "a page". Watch a ton of videos, but make no posts.
900hp would be better without those stagecoach donk wheels. Some boggers on 15" rims would be more like it. Why do people like the stupid donk wheels on a truck? You guys should wear skinny jeans and have a man bun to match the wheels.
15s wont fit on the truck. Its a K20 so 15s wont clear the brakes. Theyre only 20s on the truck. Hardly considered "donk" wheels.... Lol Everyones opinions are different, to each their own my guy.
@@brandonmurphy8491 ok my bad then 17 rims to clear the brakes and some 37×13.5×17 boggers. All rim and short sidewall is in my opinion is silly on a 4x4 looks like a donk car
@@brandonmurphy8491 Guess I want tell you I have 15x12s on my k20 and they were on my 97 k3500. 😏🤣
@brandonmurphy8491 15s will fit you just have to clearance the front calipers a little🤣 takes like 10 minutes
@@konnerkramer329 Or get a rim with 3.5 inch back spacing works too.
hella mid
Love the truck but not the flag 👎🏽
Stop ur whining u little bitch