Open Tank DP Level Transmitter Calculations

In this tutorial we will learn a how to do the calibration of dp transmitter that install on an open tank for level measurements.
Setting the range of P & DP transmitter Part1 Video: • Setting the range of S...

[@narasimmansairam7154]

please clarify us

[@Set-Point]

Kindly specify what exactly do you want to be clarified

[@narasimmansairam7154]

sir one doubt , you are considering H2=500 mm for the below tapping point, hence it's below the zero level, its could be H2=(-500 mm) so that it will be calculated as 2000-500 x 0.84, then answer will be 1260 mm right?

[@Set-Point]

@@narasimmansairam7154
Hello dear, thank you for your question. H2 is the distance from the transmitter to the lower point of the tank, as the tranmitter is installed under the tank (500mm), so when the tank is empty we still have the pressure effect of the liquid inside the pipe (impulse line).
Otherwise we need to seprese this value inside the transmitter itself.
to get this point very well, i recommend to watch the following tutorial video: th-cam.com/video/cQg5cU8hRbA/w-d-xo.htmlsi=cRxW9cjanbdRhbXN

[@narasimmansairam7154]

Got it ,Thanks a lot

[@diaatakhin5777]

محتوى قمة الروعة استاذ لاوند ❤❤

[@Set-Point]

تحياتي استاذ ضياء