Hey Tony, instead of having your left & right overhead bars end as A-pillars why not bring that bar all the way out to the front of the frame and THEN add an A-Pillar between the overhead and beltline bar with a steeper angle (which would give excellent triangulation/strength) just my 2 cents, awesome work BTW. Keep it up! Steve in Piedmont Oklahoma
As always I truly admire your skills. Hopefully as the channel progresses you'll have time to show how to layout round tube ,bend, and how to figure fish mouth angles to fit. Glad to see Conner progressing and his interest in learning. Hope he hangs around and learns more. I'd enjoy seeing a Conner build with your guidance in the future. Continued success.
Thanks Hank! Yes I am planning on doing more how too videos. I think Connor is going to be around for a while so I think we'll see a Connor build in the future.
Don't sweat it too much. You can use those tubes from the B pillar down to the rear bumper or maybe even for bedsides or tree kickers. There's always a spot to use them. I've been in the spot of spending a ton of time just to figure out its wrong or you don't like it. Keep you mind open, you'll find a use for them with minimal waste
I don't get these satisfying vids at all... but this... MMMH HMMM👍 Could you do a detail of how to easily get two sides of a 3D bend in a similar way? I'm good at eyeballing but you guy's are perfectionists... great design and craftsmanship!
I thought a great name for this buggy would be Gangrene because when you get finished with this thing it's gonna be bad to the bone aka really sick you know . Anyway love your content keep doing what you do !!
Curious what the weight difference will be from the stock chassis to the new chassis, looks like it will be much heavier. Will be enough difference to effect performance ?
If I had to guess right now I would say a couple hundred lbs heaver. This rzr stock was 144 hp. It now has around 250 hp so I think it will handle it just fine. The only way to know for sure is to just keep watching and we'll see what happens!
Always like your work For some reason I could not hear most of you video Commercials came in loud and clear but you did not And i wondering who is at fault since I see no else complaining about the problem, Steering not sure if you mention this since I could not hear But the old fashion sprocket and chain to move over 4 iniches and go straight into your box
i guess you dont need a welding helmet anymore dont your eyes bother you after that ? and your lil buddy too better get a dog for when you 2 go blind maybe hope not
have no clue why your channel isn't over 100k subs some of the best building content on TH-cam!
No regerts!!!!! Love that guy
It’s coming together
You could bust through a brick wall with that beast ! Very very cool 👍.
Hey Tony, instead of having your left & right overhead bars end as A-pillars why not bring that bar all the way out to the front of the frame and THEN add an A-Pillar between the overhead and beltline bar with a steeper angle (which would give excellent triangulation/strength) just my 2 cents, awesome work BTW. Keep it up!
Steve in Piedmont Oklahoma
As always I truly admire your skills. Hopefully as the channel progresses you'll have time to show how to layout round tube ,bend, and how to figure fish mouth angles to fit. Glad to see Conner progressing and his interest in learning. Hope he hangs around and learns more. I'd enjoy seeing a Conner build with your guidance in the future. Continued success.
Thanks Hank! Yes I am planning on doing more how too videos. I think Connor is going to be around for a while so I think we'll see a Connor build in the future.
It's coming along nicely. Another great video guys 👍👍🇨🇱
Looking good. Can't wait to see it bouncing.
Don't sweat it too much. You can use those tubes from the B pillar down to the rear bumper or maybe even for bedsides or tree kickers. There's always a spot to use them. I've been in the spot of spending a ton of time just to figure out its wrong or you don't like it. Keep you mind open, you'll find a use for them with minimal waste
Oh yeah not a big deal and at todays prices I will have to find a place for them!
Looks good. Little more angle on the A pillar maybe. Going to start building one also
My reaction may not show it but it’s pretty awesome and I can’t wait to get it done!!
I would have a steeper rack on the windscreen but looks awesome for the rest.
I have been unable to locate an old panel van to chop...I'm sorry...I have failed.
However, the RZR looks very nice and I agree about the A pillar.
LOL Well keep looking, you'll find one someday!
This is awesome! Subbed
looks ok from here.
I don't get these satisfying vids at all... but this... MMMH HMMM👍
Could you do a detail of how to easily get two sides of a 3D bend in a similar way? I'm good at eyeballing but you guy's are perfectionists... great design and craftsmanship!
Thanks man! Yes I will be doing some how to videos on how to do some tube work
Looking good
I thought a great name for this buggy would be Gangrene because when you get finished with this thing it's gonna be bad to the bone aka really sick you know . Anyway love your content keep doing what you do !!
HAHA That could have worked!
👍👍👍
Curious what the weight difference will be from the stock chassis to the new chassis, looks like it will be much heavier. Will be enough difference to effect performance ?
If I had to guess right now I would say a couple hundred lbs heaver. This rzr stock was 144 hp. It now has around 250 hp so I think it will handle it just fine. The only way to know for sure is to just keep watching and we'll see what happens!
@@HardCoreFab well make the videos faster , I’m anxious to see this one done.
Always like your work For some reason I could not hear most of you video Commercials came in loud and clear but you did not And i wondering who is at fault since I see no else complaining about the problem, Steering not sure if you mention this since I could not hear But the old fashion sprocket and chain to move over 4 iniches and go straight into your box
Hmm not sure what's up with your sound. I could have done many different ways but I got it figured out
Stay healthy. You must please your eye.
what happened to the car compactor series??
Just got some parts we where waiting on and we will be back on it and finishing it up some!
i guess you dont need a welding helmet anymore dont your eyes bother you after that ? and your lil buddy too better get a dog for when you 2 go blind maybe hope not