Got mine in and put first 600 rounds through. 115, 124, 147s all different manufacturers. Ran like a champ. No issues what so ever. Didn’t lube it either. Just used what came from the factory. The mag dumps are so simple to control. This is a phenomenal pistol.
I had a CR920P and a CR290X. Swapped the slides so I have a comped slide on the 15 round grip. The trigger wasn’t too good. A Johnny Glock drop in trigger fixed that problem. It’s a sweet shooter now.
Recently purchased one, love it but had to run 124 grain rounds to break it in. Was running 115 grain federal range ammo and it stove pipes way too much. Went to 124 had no issues cycling.
Same thing for me. Bought it today, actually my first conceal carry gun, however, after firing 150 rounds it’s not accurate at all from more than a few feet away :( will fire some more soon, hope it’s the break in but if not what a waste of 900 dollars
@@butteredtoast7110 Not accurate? I don't know of anyone who experience accuracy problems. I have no issue whether from 3 or 25 yards with hitting the target at the spot I'm aiming at. The break in period usually causes stovepipes/ejection issues depending on ammo. Optic or irons?
I had the original Cr920P. I like the gun, except the grip was a little too short. I can't stand guns that use a pinky extension. Now that cro20xp has a longer grip, I guess im going to have to buy one. Lol.
Now all of the sudden everyone is a “Gaspedal” shooter . If they don’t have one they nag about it 🤦🏻♂️. That is one hell of a great gun and don’t need no “gas pedal”.
@@PewpewReviews1 I’m probably hitting the slide lock in between shots so I’m gonna take it out tomorrow and see if it happens again. But the gun runs great no problems other then slide lock back in between shots. It happened about 6 to 8 times in the break in period
@@petey-pablo201another gun tuber Justin Opinion had the same exact issue with premature slide lock with rounds in the mag in a CR920X no comp version. Check out his vid.
@@blackpaw254just finished checking out his video and that is the same issue. I checked out the slide release on my gun and it is very loose. When the slide is off of the frame I can move the slide lock to the middle of the frame. I’m gonna send it back to shadow systems so they can fix this issue
Have the same problem. Unlike my XR920P my right thumb rests very near to slide lock. I adjusted my position so thumb rides on top of or to the left of my left thumb and problem didn't happen again. But will be sending it in to SS as I had some issues with the feed ramp.
Got mine in and put first 600 rounds through. 115, 124, 147s all different manufacturers. Ran like a champ. No issues what so ever. Didn’t lube it either. Just used what came from the factory. The mag dumps are so simple to control. This is a phenomenal pistol.
I’m right about 500 rounds with no issues as well. Perfect!
I had a CR920P and a CR290X. Swapped the slides so I have a comped slide on the 15 round grip. The trigger wasn’t too good. A Johnny Glock drop in trigger fixed that problem. It’s a sweet shooter now.
I have the original cr920p I have smaller hands so it fits like a glove it has become my new favorite edc and it take the new X mags
Phenomenal is definitely your favorite word of all times. 😎
😂
Phenomenal comment!
Recently purchased one, love it but had to run 124 grain rounds to break it in. Was running 115 grain federal range ammo and it stove pipes way too much. Went to 124 had no issues cycling.
Range day is tomorrow for me and I will absolutely keep this in mind during the break in period !
Same experience for me.
Same thing for me. Bought it today, actually my first conceal carry gun, however, after firing 150 rounds it’s not accurate at all from more than a few feet away :( will fire some more soon, hope it’s the break in but if not what a waste of 900 dollars
@@butteredtoast7110 Not accurate? I don't know of anyone who experience accuracy problems. I have no issue whether from 3 or 25 yards with hitting the target at the spot I'm aiming at. The break in period usually causes stovepipes/ejection issues depending on ammo. Optic or irons?
The glock 43x mos is a ten round gun, not 15. You can buy after market mags to make it 15vrounds. Thought everyone knew this.
I had the original Cr920P. I like the gun, except the grip was a little too short. I can't stand guns that use a pinky extension.
Now that cro20xp has a longer grip, I guess im going to have to buy one. Lol.
Totally agree! Get it 😆
Now all of the sudden everyone is a “Gaspedal” shooter . If they don’t have one they nag about it 🤦🏻♂️. That is one hell of a great gun and don’t need no “gas pedal”.
😂
Definitely better in person
Totally agree!!
Would like to see how much a difference in recoil it actually makes.
When you take it to the range, let me know if you have slide lock during rounds because that’s what I’ve been getting
Hmmm! Interesting, I’ll definitely checkout for this when I hit the range. Thanks!
@@PewpewReviews1 I’m probably hitting the slide lock in between shots so I’m gonna take it out tomorrow and see if it happens again. But the gun runs great no problems other then slide lock back in between shots. It happened about 6 to 8 times in the break in period
@@petey-pablo201another gun tuber Justin Opinion had the same exact issue with premature slide lock with rounds in the mag in a CR920X no comp version. Check out his vid.
@@blackpaw254just finished checking out his video and that is the same issue. I checked out the slide release on my gun and it is very loose. When the slide is off of the frame I can move the slide lock to the middle of the frame. I’m gonna send it back to shadow systems so they can fix this issue
Have the same problem. Unlike my XR920P my right thumb rests very near to slide lock. I adjusted my position so thumb rides on top of or to the left of my left thumb and problem didn't happen again. But will be sending it in to SS as I had some issues with the feed ramp.
Nice gun! What holster was that for the hellcat with the Gogun gas pedal
Harry’s holster (shorty). I molded the holster to fit the GoGuns gas pedal. He truly makes a great product
I have a question can cr920xp can using MR920p 15 round magazine?
@@skfheb6572 no unfortunately not. The CR920XP uses a proprietary magazine that is not compatible with any other pistol
Theres actually been 10 TH-camrs post videos out since Tuesday lol
But ok you can claim being the “First”
Would you say it’s slim like the 43x and 48 Glock?
Oh definitely ! Same platform
@@PewpewReviews1 awesome ty !
do you appendix carry? if so how similar is it in feel to the hellcat since its a bit larger?
I do appendix carry and they both feel exactly the same. I have the Hellcat pro comp and I’ve used the Hellcat pro and the standard Hellcat. lol
@@PewpewReviews1 hahaha nice! So they all feel the same even the new xp? Wasn’t sure if that extra length with the comp made it uncomfortable at all
Who makes the gas peddle on the hellcat
GoGuns 👍
audio is awful, FYI. Won’t sub
I'll order one later and see if it is compatible with the Antimatter Wing