I like that you use the proper tools. The use of the proper size hydraulic wrenches and NOT an adjustable wrench, sets you way above the bubba's out there!
If you’re servicing your own furnace you should open up the fire box and clean it out with wire brush and vacuum. You should set the electors with a tool that gives you proper adjustment ( Amazon ) .
I did this tune up and cleaned out furnace plus chimney but im still getting dark grey almost black smoke coming out chimney...this didn't happen until right after a oil delivery
Hmm, I would check for water in the oil. There’s a paste that you put on the end of a stick and drop it down into your oil tank and if the paste changes color, you got water. I would also check the combustion with an analyzer. If you don’t have one, hire a company to do it.
@@JeffsHVACAdventures will do thanks...im so lost because I do this every year and never had this problem I replace with same parts and put things back exactly how they where only thing I did differently was use one of the beckett z guage to place the nozzle to the flame retention head and electrodes...I didn't replace the electrodes jus cleaned them up.
@@JeffsHVACAdventures I just changed my filter myself since i ran dry my oil last year and someone recommended it. Do i need to prime it just for a filter change?
I like that you use the proper tools. The use of the proper size hydraulic wrenches and NOT an adjustable wrench, sets you way above the bubba's out there!
I appreciate that.
Looking forward to Part 2 😃👍👍👍
"that's what size it is!" LOL!
Can you make a video on all the possible causes for a delayed ignition on Beckett AGF ?
Thanks.
If you’re servicing your own furnace you should open up the fire box and clean it out with wire brush and vacuum. You should set the electors with a tool that gives you proper adjustment ( Amazon ) .
Good video!
Thank you so much
Thanks for watching!
Not sure if I missed it, but when was the last time the furnace was serviced?
Not sure on this one.
I did this tune up and cleaned out furnace plus chimney but im still getting dark grey almost black smoke coming out chimney...this didn't happen until right after a oil delivery
Hmm, I would check for water in the oil. There’s a paste that you put on the end of a stick and drop it down into your oil tank and if the paste changes color, you got water. I would also check the combustion with an analyzer. If you don’t have one, hire a company to do it.
@@JeffsHVACAdventures will do thanks...im so lost because I do this every year and never had this problem I replace with same parts and put things back exactly how they where only thing I did differently was use one of the beckett z guage to place the nozzle to the flame retention head and electrodes...I didn't replace the electrodes jus cleaned them up.
@@JeffsHVACAdventuresWhat do you do if you have water?
@@kimbuck-2 you have to get the oil company to pump the water out.
Did you bleed/prime the pump?
I'm sure I did. Made this video awhile ago.
@@JeffsHVACAdventures I just changed my filter myself since i ran dry my oil last year and someone recommended it. Do i need to prime it just for a filter change?