Thank you so much for this detailed instruction video. I stripped my PPK to re-finish it and was really struggling with the sear and sear spring placement. Thanks to you my gun is up and running again.
Hello sorry for the late reply I have been out of action for some time. Thank you so much I really appreciate the kind comments I'm glad this video is helpful.
Thank you very much for the video; it helped me understand thegun better. In my case, I used it to add two small washers to the bottom of the hammer spring. This slightly compresses the hammer more, and it seems to have increased both the kick and the power.
Hello bud Thank you for the nice comment. I'm glad the video has helped you. I will redo it at some point as the lighting and audio aren't great. You could also try a thicker gage spring and do away with the washers. Just be careful to keep the power output well within your countrys power limits Happy plinking 🙂
@@bingobango7734 i finished it. It works now thank you so much🤘. One more thing i know bug but what was your solution for the co2 air seal not having enough seal?
@@silenthunder5657 That's awesome buddy I'm glad the video helped for the Co2 seal or any o-rings soak them in pellgun oil for 72+ hours I have heard people using other oils from brake to transmission but I have never tried that myself and would be worried it may damage them if they look like a squirrel has had a go at them it's a replacement jobby
FANTASTIC :) !!! Thanks you so much. There an Ultimate mod you can do for your walther ppks to look more like the real firearms.The maker mention : " The PPK and the PPK/S are two different guns. But the PPK/S (which the replica is based on) is basically a Walther PP frame with a PPK slide which was done for some U.S requirement. I had the CO2 replica which I modded. Since it's a PP frame I was able to purchase reproduction PP grips and fitted them on to the air pistol which was a nightmare of a task with aligning the spring clip. I also chopped off the rear bottom corner of frame to make the extended magazine stand out more. To me it looks much better than the stock version." I can provide photo.
This is super detail and it's appreciated but both the disassembly and the rebuild audio is recorded at VERY LOW volume. I have all settings for audio pegged to the max and I'm getting about half the words. The disassembly is CC but the rebuild is not, so I'm lost on that which is far more difficult a process. There is a lot of bass in the audio too which makes it tough to understand as well.
Hello sorry for the late reply I have been out of action for some time. Thank you for the useful information I will try sorting a Mic and better lighting for future videos
@@bingobango7734 A Ultimate Mod allow you to make the walther look like the real steel version.The maker mention : " The PPK and the PPK/S are two different guns. But the PPK/S (which the replica is based on) is basically a Walther PP frame with a PPK slide which was done for some U.S requirement. I had the CO2 replica which I modded. Since it's a PP frame I was able to purchase reproduction PP grips and fitted them on to the air pistol which was a nightmare of a task with aligning the spring clip. I also chopped off the rear bottom corner of frame to make the extended magazine stand out more. To me it looks much better than the stock version."
@bingobango7734 , im SO in love with the PPK/S , please watch the youtube video and make a BETTER tutorial how we can do this mod search youtube title umarex makarov co2 power and trigger mod. did you think we can import this mod to the Umarex Walther ppk/s ?
Thank you so much for this detailed instruction video. I stripped my PPK to re-finish it and was really struggling with the sear and sear spring placement. Thanks to you my gun is up and running again.
Hello sorry for the late reply I have been out of action for some time.
Thank you so much I really appreciate the kind comments I'm glad this video is helpful.
Thank you very much for the video; it helped me understand thegun better. In my case, I used it to add two small washers to the bottom of the hammer spring. This slightly compresses the hammer more, and it seems to have increased both the kick and the power.
Hello bud
Thank you for the nice comment. I'm glad the video has helped you. I will redo it at some point as the lighting and audio aren't great. You could also try a thicker gage spring and do away with the washers. Just be careful to keep the power output well within your countrys power limits Happy plinking 🙂
Here in Spain the limit is 24 Joules, not a problem with these Co2 pistols.@@bingobango7734
Good Afternoon, very nice video
Hello sorry for the late reply I have been out of action for some time.
Thank you for the positive comment I really appreciate it
Thank you man appreciate it. Im going to watch it now
No problem buddy it was my mistake i must have had a total brain fart moment when up loading the video i hope this video helps 😀
@@bingobango7734 i finished it. It works now thank you so much🤘. One more thing i know bug but what was your solution for the co2 air seal not having enough seal?
@@silenthunder5657 That's awesome buddy I'm glad the video helped for the Co2 seal or any o-rings soak them in pellgun oil for 72+ hours I have heard people using other oils from brake to transmission but I have never tried that myself and would be worried it may damage them if they look like a squirrel has had a go at them it's a replacement jobby
@@bingobango7734 thanks bud
FANTASTIC :) !!! Thanks you so much. There an Ultimate mod you can do for your walther ppks to look more like the real firearms.The maker mention : " The PPK and the PPK/S are two different guns. But the PPK/S (which the replica is based on) is basically a Walther PP frame with a PPK slide which was done for some U.S requirement. I had the CO2 replica which I modded. Since it's a PP frame I was able to purchase reproduction PP grips and fitted them on to the air pistol which was a nightmare of a task with aligning the spring clip. I also chopped off the rear bottom corner of frame to make the extended magazine stand out more. To me it looks much better than the stock version." I can provide photo.
This is super detail and it's appreciated but both the disassembly and the rebuild audio is recorded at VERY LOW volume. I have all settings for audio pegged to the max and I'm getting about half the words. The disassembly is CC but the rebuild is not, so I'm lost on that which is far more difficult a process. There is a lot of bass in the audio too which makes it tough to understand as well.
Hello sorry for the late reply I have been out of action for some time.
Thank you for the useful information I will try sorting a Mic and better lighting for future videos
@@bingobango7734 A Ultimate Mod allow you to make the walther look like the real steel version.The maker mention : " The PPK and the PPK/S are two different guns. But the PPK/S (which the replica is based on) is basically a Walther PP frame with a PPK slide which was done for some U.S requirement. I had the CO2 replica which I modded. Since it's a PP frame I was able to purchase reproduction PP grips and fitted them on to the air pistol which was a nightmare of a task with aligning the spring clip. I also chopped off the rear bottom corner of frame to make the extended magazine stand out more. To me it looks much better than the stock version."
@bingobango7734 , im SO in love with the PPK/S , please watch the youtube video and make a BETTER tutorial how we can do this mod search youtube title umarex makarov co2 power and trigger mod. did you think we can import this mod to the Umarex Walther ppk/s ?
I will have to take a look buddy in the UK we can't go over certain power restrictions.