PVC Kayak Rod Holder and Go Pro Mount
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Today I will be showing how to make a DIY PVC Rod Holder with an Optional Go Pro Mount. This design has been floating around for a while. I first saw it on Vibe Kayak Owners Group. I just modified it to fit my needs. Below is a list of materials I used. If you have any question please feel free to comment.
Facebook: / fishingwithvegas
Instagram: / fishing_with_vegas
Materials Used Rod Holder:
2 16 Inch 1 ¼ PVC
2 9 inch 1 ¼ PVC
2 3 inch 1 ¼ PVC
2 Elbow 1 ¼ PVC
2 45 Degree Angle 1 ¼ PVC
4 Cross 1 ¼ PVC
8 Couplers 1 ¼ PVC
8 2 ½ inch 1 ¼ PVC Pipe
PVC Cutters
Measuring Tape
Marker
¾ Inch Screw Eyes
Go Pro Mount
1 12 inch 1 ¼ PVC
1 8 inch 1 ¼ PVC
1 4 ¾ inch 1 ¼ PVC
1 2 ½ inch 1 ¼ PVC
2 12 inch 1 inch PVC
1 Tee 1 ¼ inch PVC
1 1 inch to 1 ¼ inch elbow
1 1 inch coupler one side threaded other side slip
1 1 inch Cap
![[DRIP] ‘BILLIONAIRE’ PREVIEW](http://i.ytimg.com/vi/m0eXQD0gIeE/mqdefault.jpg)
Solid solution. Best I’ve seen. Really clean design and functional, especially with the adjustable GoPro arms and locking pins. Very well thought out solution and nice paint to match finish. Great job!!!
Simple and straight to the point....Great job....Now the trick is if I can do it....lol.....I'm sure I should have no problem........
smartly done my friend... and very cool paint job!
One of the best rod holder videos I’ve seen so far. Nice job!
Great idea and keeps everything out of the way and organized. Just what I need to do to my yak.
Great video. Great looking rod holders!
Very nice job man. Pretty inventive way to mount the go pro.
Nice Job! Gave me some good ideas, thank you
Not gonna lie...that is pretty dang cool! Very well thought out!
Thank You!
If any one ends up using this design Please let me know how it worked for you and send Pictures!!
Great idea on the mount, think I’m going to give this a try.Thanks great video!
This is absolutely brilliant!!!
Nice work done here!! Nice detail, went the extra mile! Bravo!
Thank You!
Awesome set up! Thanks for sharing! I love it!
Thank you great vid man..👍
Bro I appreciate you making this! I have the new vibe shearwater 125 and I hate the rod holders. Did this and I love it. Painted it all black and it looks awesome. I just need to do the GoPro mount now
Enjoy your shearwater and rod holder! I am happy the design worked out for you!
thanks for sharing the setup looks dope! appreciate you sharing this!
Thank you, and Thank you for watching!
Nicely done, appreciate the video.
Just made mine today for my Vibe Skipjack 90. Only difference was I used 3 way T's and extended each holder 12". Ready to paint it now
Awesome, I hope it works well for you!
Great idea for gopro.
great job
Will have to check this out later when I have more time... but, new Sub here from Missouri. Hope to see more vids !!
Thank you for the Sub! More are on the Way
Was gonna make something like this for storage in the garage but I think I'll do a set up for the kayak and garage
I built a pvc fishing cart and instead of gluing together I used stainless screws in each joint so it could be easily taken apart and modified as I want to make changes and additions
Now that you've had a chance to use your rod holders, do you feel that they sit too high? Any modifications or adjustments you would make, if you were to rebuild?
Are you able to adjust to holder backward for if your going under a bright or trees etc you can face the rods backwards?
You can install the holders in any direction you would like. I am sure you could even make them adjustable.
What length did you use in between the crosses to connect them
I believe they are slightly less than 1 inch pieces, you want a piece just to hold the glue.
Put more holes in the one inch pipes for 360° movement
Nice BRZ! Still have it? :)
I do, Thank You