Hyundai Tiburon Door Handle Replacement Second Generation (2002-2008)
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- This is a 2007 Hyundai Tiburon GT The door handle broke off the outside drivers side of Dawn's car. We decided to be nice and order a door handle for her off of Amazon. Check the link below for the drivers side door handle. You will need a 10 MM socket and a ratchet extension to get the bolts out of the door handle, a Phillips screwdriver and a flat head or pry tool. You may want to get some spray paint at your local auto parts store. or find it online. Try and get a close matching color if you can find it. Please Thumbs up and leave a comment if you have any questions.
www.amazon.com...
Here’s the missing info guys:
Once both bolts are out, you'll want to loosen the lock cylinder. Turn it to the left a little and pull it away from the door handle. Then disconnect the plastic clip and remove the rod that controls the door mechanism. Just push it out to the right.
Extremely helpful vid, thanks a bunch I just saved myself $165 fitting fee on a part I had to order for the mechanic anyway.
Out of all the videos I've seen you guys had the best. Thanks for the help
This saved my a$$ thank you guys appreciate it
Used your video to do mine u are so right on grove I agree the new one was pain i used gasket from old one made easy thanks for info was dead on
Excellent video
You the goat i couldnt figure that lock out to save my life
It was a major pain, glad the video helps.
@@ricker "should we take it apart and show them? No." The "tab and groove / rotate" decription helped me a lot. No way would I have taken mine apart for a video once I got it, lol. It's a 5 year old video but still helping people. Thanks!
@@cochise3300 I am glad People still getting use out of this video. It was annoying at the time, but so gratifying to help others and Spend some quality time with the old man. My Roomate was so happy when we fixed it.
Thanks now i can fix my Hyundai Tiburon.
Nice.... thanks my friend
shouldnt step #1 be to put the yellow tabs on the door handle and insert the pin, THEN #2 attach the handle with springs and mechanism to the faceplate? I installed the handle and realized your next step should have been #1
sorry i hope the video helped.
This gave you guys a hard time 😂🤣😅
yea because there was not a good video on how to do it.
@@ricker I'm still watching this video and others to get a good idea on how to go about it. I need to install outside and inside passenger handles🤦🏿♂️
Do you remember what the wedge shaped piece is for?
The Tweeter speaker?
It was a piece that came with the new handle. In your video at 0:41 it is in the top left corner on top of the yellow washer like piece and the rubber piece so the handle retracts quietly @@AwesomeDocumentary
Im doing exactly what you are demonstrating but my door handle is not coming out whatsoever.
Did you have to take the lock out or did you just choose too?
I think you have to take the Lock out to put it in the New door handle
This wasn’t any help. I’m looking for BROKEN car door knob and can’t even open the door.
Just take it to a shop with the parts. My shop did the handles inside and out for 150 buks. Well worth it.
Replace that janky speaker.
Yeah I’m just gonna have someone else do it for me lol
Non of these people that I've looked up shows how they put this in. None. I'm going to do a video that shows how. Why doesn't anyone show people how they put it in?
Because it took us a about an hour to figure it out and we weren't going to take it back out to put it back in there to show it on camera because it was done. However I did go on to explain how the Lock has a tab that goes into the groove on the plastic part. Understand your frustration, Sorry we didn't show it.
Looks like you didn't do a video either...
@@Flopsaurus When the other side breaks I will show it better promise.
Oh yeah 2 10mm bolts then it’s out ... bullshit ...you skip the hard part which is getting the handle out which is the title of this video not , how to find the door handle bolts and spray paint
I tried. Sorry this video didn't help at all.
Dude the little bit of room I had and did them to get a lens in there stfu snotty scotty
i had this car, the plastic parts and door handles etc are as cheap as they come, toy cars at walmart are made of better plastic, seriously