Thanks for the video. I bought one of these for painting our house, and needed a video like this to see how to set it up and use it. Also good tips on having extra tape pieces ready. Thanks,! TJ
What a time saver,bought mine at home depot,it paid for itself on the first day.Only used it with the paper.Paid 35$ plus about 10 for the blade.Awesome product!
Can this help you if you were painting and the customer decided after the walls were finished they wanted the ceiling painted? Will it protect your awesome job on walls?
Thanks for teaching us how to do it. Why is it that when the plastic film has covered the window, the plastic film is being sucked into the window? Is it due to air pressure or wind?
+Walter Bernardo Thanks for the info Walter! 3M saw my video and sent me their new straight cut blade. It works extremely well. I have a review posted if you're interested. I don't know what they cost, or how/where to get them- but you might look into one when you need a new blade. Take care, G. th-cam.com/video/RrP-WJilREU/w-d-xo.html
Ben, as I recall- I had the SW store try to order one for me and they had no success. They contacted the local rep and He/She sent one to the store for me to pick up. It was free to me in that regard. Not much help- but take care, G.
Next time stick the foil to the windos like - leaving no air in betweenz If you do it like this ,you might pierce right true if you bump or even a jet from the spray might just rip through ! And make it all messy job. I wasn’t sure about getting one meself but will do so after watching your vid. So thx ( i hope )
Oh that’s awesome I hope he has the part that 3M doesn’t give to the stores.That’s the part that holds the end of the plastic and lets it cut straight.
@@brianhynote1428 I can't say if that site has the straight cut blade, but it does work great. I have a video posted on the one 3M sent me. Here's the link. Good luck, G. th-cam.com/video/RrP-WJilREU/w-d-xo.html
I didn't use much paper with this blade- mostly plastic. 3M sent me a sample of their straight cut blade so that's the one I've been using. I've used a fair amount of paper with it- along with plastic. Mine seems to be holding up OK- but then again, I've only used it to mask off an investment property I purchased and renovated. Thanks for sharing your experience. Take care, G.
Awesome! Thank you for taking the time to show in detail how to use this tool! Very helpful.
Thanks Sam! Glad you liked it. Good luck, G.
Thanks for the video. I bought one of these for painting our house, and needed a video like this to see how to set it up and use it. Also good tips on having extra tape pieces ready. Thanks,! TJ
Glad it was helpful TJ! Yeah, the pieces of tape make things go much more smoothly. Good luck with your project, G.
What a time saver,bought mine at home depot,it paid for itself on the first day.Only used it with the paper.Paid 35$ plus about 10 for the blade.Awesome product!
I agree! I've used it with paper and film, and it's more than paid for itself. Good luck, G.
Can this help you if you were painting and the customer decided after the walls were finished they wanted the ceiling painted? Will it protect your awesome job on walls?
Nice tool. Good explanation and demo. Great work on the house painting! Thanks for sharing.
Thanks Mac. It's worth every penny in my opinion. G.
I'm told if you take the blade guard off, the cut is a lot easier to perform.
Possibly so, but be careful though. This thing is sharp. I've gotten into it even with the guard and it will do some quick damage. Take care, G.
Great demonstration. Thank you!!!
Thanks Mark! Good luck, G.
Great information. Thanks for doing this. Very helpful.
Thanks Joe! Glad you found it informative. Take care, G.
I think it has the sharp blade on the other side of the sawtooth one. I got the same kit and both blades are on it
WOW!! Thanks for the comment. It never occurred to me to simply flip the blade over! Thanks again, G.
@@ghostses nope nevermind. I was totally wrong.
@@TheVeganeater That's no good. Thanks for the reply. Take care, G.
Thanks for teaching us how to do it.
Why is it that when the plastic film has covered the window, the plastic film is being sucked into the window? Is it due to air pressure or wind?
No problem! The film has a static cling effect when applying it. Take care, G.
***** Thats enlightening! Thank you.
Cosmo John
No problem! G.
In my opinion taking of the guard on the blade makes cutting your roll of plastic or paper alot easier with a straighter cut.
+Walter Bernardo
Thanks for the info Walter! 3M saw my video and sent me their new straight cut blade. It works extremely well. I have a review posted if you're interested. I don't know what they cost, or how/where to get them- but you might look into one when you need a new blade. Take care, G.
th-cam.com/video/RrP-WJilREU/w-d-xo.html
did you manage to buy the hook for it ?
Ben, as I recall- I had the SW store try to order one for me and they had no success. They contacted the local rep and He/She sent one to the store for me to pick up. It was free to me in that regard. Not much help- but take care, G.
Next time stick the foil to the windos like - leaving no air in betweenz
If you do it like this ,you might pierce right true if you bump or even a jet from the spray might just rip through ! And make it all messy job.
I wasn’t sure about getting one meself but will do so after watching your vid. So thx ( i hope )
Thanks! Good luck, G.
You’re awesome brother thank you sir for helping your community
Thanks Tyson. Glad you liked it. Take care, G.
You can get a hook and all of the other parts at Idaho painter store or website.
Thanks! G.
Oh that’s awesome I hope he has the part that 3M doesn’t give to the stores.That’s the part that holds the end of the plastic and lets it cut straight.
@@brianhynote1428 I can't say if that site has the straight cut blade, but it does work great. I have a video posted on the one 3M sent me. Here's the link. Good luck, G.
th-cam.com/video/RrP-WJilREU/w-d-xo.html
I have found that using paper with the plastic blade dulls it faster
I didn't use much paper with this blade- mostly plastic. 3M sent me a sample of their straight cut blade so that's the one I've been using. I've used a fair amount of paper with it- along with plastic. Mine seems to be holding up OK- but then again, I've only used it to mask off an investment property I purchased and renovated. Thanks for sharing your experience. Take care, G.
thanks bud I will get one tomorrow.
No problem! They're a great tool! Good luck, G.
How was the tool?
Nice tool for those painting jobs.
It is Roland! G.
What is the tape
Width?
I use 3/4" but you can adjust the machine to any width you like. Good luck, G.
Good video
Thanks! G.
great
Thanks, G.
where can I purchase this
I got mine from Sherwin Williams. I think Home Depot has them too. G.
it only took half a day..
Yep, and only took a few hours to spray the entire house. G.
Product is a waste of time. It's easier to just cut and tape
I really like it, but to each his own. Take care, G.