I just bought and installed one of these in my 2021 JL Wrangler Rubicon. Love this light bar. Light bleed is very minimal. I actually used black electrical tape to close out any light bleed. I also attached my radar detector via Velcro to the bottom of this as I power my radar detector through my rear view mirror.
Definitely on the wish list! One suggestion for any future revisions, include a "running light/marker light" option, where a switch turns on some amber lights that just bring visibility to your rig (but don't throw light down range).
It would be nice if it had one mode where it dimmed them and turned on only half a dozen or so lights so it looks like the diesels with marker roof lights.
Just did the install with the Adaptative Cruise version: The brackets are VERY different, and since the light bar is in two pieces, you will need to adjust the way you fit each side in. Additionally, for you soft-top people, you may need to adjust the latch brackets to get a good, tight fit from the soft top.
The older version of this stealth light bar isn't compatible with the sky one touch power roof either but if you're crafty you can make it fit. I've got it on my 2020 Wrangler Sahara JLU. All you have to do is drill a couple of holes to the interior plastic cover and get longer screws with a few thick spacers to make it fit. The windshield frame comes with the attaching nuts pre-installed from the factory. Easy peasy. 😉👍
I was excited with the new version for the adaptive cruise control until you said its not for sky OneTouch power top. I hope they release something to that. I love my sky ouetouch
You can make it fit, all you have to do is drill a couple of holes in the plastic cover, get longer bolts and a few thick spacers from Ace hardware. The windshield has the attaching nuts already pre-installed from the factory. Nothing to it. I did it on my Sky One touch 2020 Sahara. The only difference is that I don't have the adaptive control.
Great install video. One question. I have the lasfit aux swithes insatlled, and they piggyback the cigarette lighter socket. Will this harness be able to piggyback that harness ?
I have the prior version of this in my 2022 Gladiator Rubicon. The answer to your question is no. There’s only one switch on the stealth light bar. That switch only lets you turn on the light bar and lets you select either amber or white lights. There are no controls for adjusting the brightness.
You could do that easy enough with a couple relays depending on polarity, but depends on if you want to make alterations to the light bar and try disassembling it yourself or not.
@@a1racer441 I think you are right. I was just looking at the wiring diagram. If I am reading this correctly. AUX switch 3 and 4 are 15 amp and I think you should be able to tie into those to run these lights. I personally would like to run it that was since I also plan on using the 12 connector location for the Mopar trailer break controller.
The ignition has to be on for the light bar to turn on, as it's pulling power from the 12 volt accessory socket which is a switched power source. If that isn't your issue, double check the connection and the fuse.
These are awesome but I’m 6’1” and giving up ANY window space is a no. Too bad this can’t replace the entire panel above instead to be factory replacement style.
Agreed. I can't even use the sun visor when it's sunny out bc I can't see under it bc I'm too tall which means this one for sure won't be able to be used
@@JumboRelic I have a JT and the Seats already in its lowest position available, unless you have an aftermarket seat or bracket. Maybe I have a longer torso than most, I don’t know, I also don’t have the seat very reclined like most people. I prefer to sit upright.
Disappointed in my purchase that I made 2 weeks ago and after long waiting with no update about the order I email the company and they said its out of stock and pre-order and I have to wait more than 2 weeks more so why u guys don't update your website to show it's out of stock or pre-order happly canceled my order that was my first time dealing with quadratec and it's last time bad experience
Sorry to hear about your experience. Our site is updated to show In Stock, Out of Stock and Pre-Order Status. Which version did you order? Our JK and JL 1-Piece light bars are both in stock right now. The only option that is currently out of stock is the 2-piece design compatible with the ACC system.
I just bought and installed one of these in my 2021 JL Wrangler Rubicon. Love this light bar. Light bleed is very minimal. I actually used black electrical tape to close out any light bleed. I also attached my radar detector via Velcro to the bottom of this as I power my radar detector through my rear view mirror.
Aerodynamics is jeep owners primary concern. This will def improve the quarter mile time.
Instant 10 second quarter mile times! 😂
Purchased one when they were on Pre-order. Light installed very quickly and light bleed is almost non existent. Extremely happy with it.
Definitely on the wish list! One suggestion for any future revisions, include a "running light/marker light" option, where a switch turns on some amber lights that just bring visibility to your rig (but don't throw light down range).
I was hoping gen 2 would have that! It would be really nice if it did!
It would be nice if it had one mode where it dimmed them and turned on only half a dozen or so lights so it looks like the diesels with marker roof lights.
Wonder if you could just add a dimmer to the amber side?
Thanks for the suggestion!
Just installed mine today…love it. Gained about 2.5 bhp
Just did the install with the Adaptative Cruise version:
The brackets are VERY different, and since the light bar is in two pieces, you will need to adjust the way you fit each side in.
Additionally, for you soft-top people, you may need to adjust the latch brackets to get a good, tight fit from the soft top.
The older version of this stealth light bar isn't compatible with the sky one touch power roof either but if you're crafty you can make it fit. I've got it on my 2020 Wrangler Sahara JLU. All you have to do is drill a couple of holes to the interior plastic cover and get longer screws with a few thick spacers to make it fit. The windshield frame comes with the attaching nuts pre-installed from the factory. Easy peasy. 😉👍
It would be so awesome if it could be switched so that you can use them as running lights!
Would love to see another video with the adaptive cruise control module. Great video!
3:04 This section is shown on a different jeep that appears to have the adaptive cruise control. Can anyone at Quadratech confirm?
Very happy with mine so far
I was excited with the new version for the adaptive cruise control until you said its not for sky OneTouch power top. I hope they release something to that. I love my sky ouetouch
You can make it fit, all you have to do is drill a couple of holes in the plastic cover, get longer bolts and a few thick spacers from Ace hardware. The windshield has the attaching nuts already pre-installed from the factory. Nothing to it. I did it on my Sky One touch 2020 Sahara. The only difference is that I don't have the adaptive control.
Great install video. One question. I have the lasfit aux swithes insatlled, and they piggyback the cigarette lighter socket. Will this harness be able to piggyback that harness ?
Me too, did you end up getting one and finding a way around this?
Can you dim the amber lights to act like pre runner lights if you wanted to do so?
I have the prior version of this in my 2022 Gladiator Rubicon. The answer to your question is no. There’s only one switch on the stealth light bar. That switch only lets you turn on the light bar and lets you select either amber or white lights. There are no controls for adjusting the brightness.
I want a stealth rear chase lights for a jku.
Any chance we can see a version where you can have the white LEDs run on one of the Mopar AUX switches and the amber LEDs run on another?
You could do that easy enough with a couple relays depending on polarity, but depends on if you want to make alterations to the light bar and try disassembling it yourself or not.
@@a1racer441 I think you are right. I was just looking at the wiring diagram. If I am reading this correctly. AUX switch 3 and 4 are 15 amp and I think you should be able to tie into those to run these lights. I personally would like to run it that was since I also plan on using the 12 connector location for the Mopar trailer break controller.
Looks pretty good. Will it work with a Bestop Sunrider installed in your Jeep?
First gen does, I'd assume this does too. I have both on my Gladiator
Sure will!
How does the install vary with the new screen?
How much distance do these illuminate? Or are they mostly for spread in short distance?
Anyone know who actually builds this for Quadratec?
Which could we use for the powertop ? Will there be one coming ?
At this time there are no plans to make a Sky One Touch Power Top compatible Stealth Lightbar.
Will the light bar ever be available for the one-touch sky top ???
At this time there are no plans to make a Sky One Touch Power Top compatible Stealth Lightbar.
I just got it installed, can’t get it to turn on, racking my brain trying to figure this out.
The ignition has to be on for the light bar to turn on, as it's pulling power from the 12 volt accessory socket which is a switched power source. If that isn't your issue, double check the connection and the fuse.
Where’s the video for the jks
i need this for my wrangler.
All we need now is a Bluetooth module controller and an RGBw option for the LEDs and now we are cooking
I installed it but lost my back up camera?
Can the gasket be retrofitted to the Gen 1 Stealth Light bar?
getting one in a few days!
Any way there will be a version compatible with sky one touch in the future?
At this time there are no plans to make a Sky One Touch Power Top compatible Stealth Lightbar.
I have two of them on the way.
These are awesome but I’m 6’1” and giving up ANY window space is a no. Too bad this can’t replace the entire panel above instead to be factory replacement style.
Agreed. I can't even use the sun visor when it's sunny out bc I can't see under it bc I'm too tall which means this one for sure won't be able to be used
There’s ways to lower the seat and move it back!
Im 6’9” and this bar doesn’t really affect my sight at all except if I am the first in line at a red light
Do you have a JL? I'm the same height. Lower your seat to the lowest position... easy fix. You new?
@@JumboRelic I have a JT and the Seats already in its lowest position available, unless you have an aftermarket seat or bracket. Maybe I have a longer torso than most, I don’t know, I also don’t have the seat very reclined like most people. I prefer to sit upright.
Subbed and buying one. Fuck Extreme Terrain!!!
Anyone has a how to install this on a 2024?
Does the latest version work with a grab handle (JKU)?
The Stealth light bar shouldn't affect the use of a grab handle
👍👍 NICE
Disappointed in my purchase that I made 2 weeks ago and after long waiting with no update about the order I email the company and they said its out of stock and pre-order and I have to wait more than 2 weeks more so why u guys don't update your website to show it's out of stock or pre-order happly canceled my order that was my first time dealing with quadratec and it's last time bad experience
Sorry to hear about your experience. Our site is updated to show In Stock, Out of Stock and Pre-Order Status. Which version did you order? Our JK and JL 1-Piece light bars are both in stock right now. The only option that is currently out of stock is the 2-piece design compatible with the ACC system.
@Quadratec when I ordered it, wasn't showing that out of stock. i ordered the 2 pieces because i have the 392 purchase made in 8sep
Is this safe for other drivers when driving at night on highway during heavy rain?
This light is intended for off road use only. This light is not DOT or SAE approved for on road use.
Very sick light, but it needs to be a lot slimmer.
It really couldn’t be much slimmer than it is. It’s pretty slim now, I’d post a pic if I could.
@@topgunviper Can you share a video? Do you have one installed on yours?
I added link of video to this chat