This demonstrates how to do a mission that does the following: - takeoff - fly to a location - land - disarm - wait 60 seconds - arm - takeoff - fly back home, land and disarm
What a great video giving a fantastic insight into where we can find the information we need to be able to learn more and do more with mission planner, ardupilot is such a fantastic system with so much capability. I can't wait to do so many more projects with ardupilot.
it would be nice to have a switch we could use for a mission pause and restart but Andrew that is one of the best most concise video,s great work and even old dumpling like me can make it work just awesome doggie will get extra sausages and say thank you for making us happy
Thanks for the information Questions 1. How do I go about connecting the switch to the Pixhawk? 2. This can be done on an UAV FIX-WING other than Quadcopter? Let's say, it can be done. The receiver will pick up the FIX-WING IAV and throw it in the air after it is arm and against the wind???
I have tried land and continue on 4.2. It’s working perfectly alright. I am keen to add led function. Say suppose I have given delay of 120 seconds. What I am looking is after drone has landed and motors are shut down after 5 seconds a bright light LED should switch on and after a delay of 115 seconds LED should switch off to give an indication that Drone is about to take off. Or A buzzer should give a signal 5 seconds before the delay given to Drone, there by indicating it’s about to take off. I request for your guidance with example as how to do it. Thanks and regards
I want to do something similar. I want the UAV to land, disarm, and wait for the command from Arduino to arm and take off. Instead of delay in between, I need it to wait for the command from Arduino.Any suggestion on how to approach it.
I hv tried it works in simulation. When I tried in actual using 2.4.8 pixhawk, 4.1.2 gets downloaded but, I do not get required parametrs which are to be changed when I go in Full Parameters. Where I am going wrong any help.
“Advance ArduPilot Mission Planning- Continue after land”, i have tried it is working in Simulation. But when i tried to do it in quad plane, using Pixhawk 2.4.8 and software 4.1.2, i do not get parameters which are required to be changed in Parameter list as explained in “Advance ArduPilot Mission Planning- Continue after land”. Can someone help?
Hi sir, after the second takeoff, when I give return to launch, the drone is landing in the same location. It is not coming back and landing at my home location. Can you tell me how to enable RTL?. The drone seems to forget my home location.
Keep up with these videos! super helpful insights
What a great video giving a fantastic insight into where we can find the information we need to be able to learn more and do more with mission planner, ardupilot is such a fantastic system with so much capability. I can't wait to do so many more projects with ardupilot.
have you now done many more projects with ardupilot? did you succeed?
it would be nice to have a switch we could use for a mission pause and restart but Andrew that is one of the best most concise video,s great work and even old dumpling like me can make it work just awesome doggie will get extra sausages and say thank you for making us happy
This will make us really "Happy Flying", Thanks you.
Thanks a lot for sharing. Hoping to catch another tutorial from you.
Thank you for sharing this with us
Very helpful videos!
hi sir thank you for this great feature
Very good example of manipulations in simulation. Thank you very much!
*** RESPECT **** Great job
Thanks for the information
Questions
1. How do I go about connecting the switch to the
Pixhawk?
2. This can be done on an UAV FIX-WING other than Quadcopter?
Let's say, it can be done. The receiver will pick up the FIX-WING IAV and throw it in the air after it is arm and against the wind???
Is it the same procedure for quadplane?
Awesome video! Could you give the link to functions id list for copter 4.2 please?
Is there a way to add one of these awesome functions so that a mission can be paused and resumed on a button press without resorting to LUA scripts?
Does this work for single rotor traditional helicopter vehicles too?
Hi Tridge, can we do the same mission for a Quadplane 4.1.2 ??
why we need line 4, quad already make disarm after land
I have tried land and continue on 4.2. It’s working perfectly alright.
I am keen to add led function. Say suppose I have given delay of 120 seconds. What I am looking is after drone has landed and motors are shut down after 5 seconds a bright light LED should switch on and after a delay of 115 seconds LED should switch off to give an indication that Drone is about to take off.
Or
A buzzer should give a signal 5 seconds before the delay given to Drone, there by indicating it’s about to take off.
I request for your guidance with example as how to do it.
Thanks and regards
I want to do something similar. I want the UAV to land, disarm, and wait for the command from Arduino to arm and take off. Instead of delay in between, I need it to wait for the command from Arduino.Any suggestion on how to approach it.
Sir, Can we do the same mission for a Quadplane 4.1.2, in actual ??
I hv tried it works in simulation. When I tried in actual using 2.4.8 pixhawk, 4.1.2 gets downloaded but, I do not get required parametrs which are to be changed when I go in Full Parameters.
Where I am going wrong any help.
“Advance ArduPilot Mission Planning- Continue after land”, i have tried it is working in Simulation. But when i tried to do it in quad plane, using Pixhawk 2.4.8 and software 4.1.2, i do not get parameters which are required to be changed in Parameter list as explained in “Advance ArduPilot Mission Planning- Continue after land”. Can someone help?
8:50 why you don't show 218 in the line 4 of mission, for example: Unknown(218)?
ı think 218=unknows ownself
I've opened an issue for this: github.com/ArduPilot/MissionPlanner/issues/2710
@@ardupilot19 , thank you
@@SAMETELMACI don't think, just watch video.
Hi sir, after the second takeoff, when I give return to launch, the drone is landing in the same location. It is not coming back and landing at my home location. Can you tell me how to enable RTL?. The drone seems to forget my home location.
Likely bc new home point is established every time the drone is armed. So the new home point is where it landed at..that might be tricky.
Now my biggest fear is while arming the vehicle that landed to a remote location and "Unhealthy AHRS" appeared on my screen :)
Did this contact on LinkedIn happen to be a drug runner? Asking for a friend.
People who interested in this, the ARMDISARM function is now 153 :)