looking good the hot power washer was doing a good job. on my 82 300 I bent a piece of roof aluminum and made a heat collector to keep the carb from freezing up it wouldn't do it all the time just often to drive you nuts. keep up the good work
I wonder what was going on with that freezing up... I've seen old tractors do that but the heat riser on the 300 should prevent that I'd think. Thanks Tim 👍
Was thinking, I would put the threaded plug in the other way so the washer could set against the wide part of the plug... I welded the same heat raiser on a 300 in a 79 F150 (wish I had the truck back…). I used a mig welder and heated it up with the fire wrench, looks like you braised it.. nice jobs Also, where is the IH 86 in the corner??
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
![[Part 1] ทารกน้อยถูกทิ้ง👶 หญิงชราเก็บขวดขายเลี้ยงดูเขาจนโต #โลกการละคร](http://i.ytimg.com/vi/nPTDvFCExks/mqdefault.jpg)
That's what I like about you...there ain't much you can't do, and you're not afraid to touch anything that's broke!👍
Great job Dude.
I'm not afraid to look at anything but sometimes things get the best of me.
Thanks Kent 👍
Good one Andy.
Thanks Barry
looking good the hot power washer was doing a good job. on my 82 300 I bent a piece of roof aluminum and made a heat collector to keep the carb from freezing up it wouldn't do it all the time just often to drive you nuts. keep up the good work
I wonder what was going on with that freezing up... I've seen old tractors do that but the heat riser on the 300 should prevent that I'd think.
Thanks Tim 👍
First day with a drill, wait that bench was clutter free. Nicely done. Hahah. Safety third 😁
😔
Drills hurt me
@@AndyFromm but you where using a lathe today. You need life alert 🤣
@@jakemortwedt161 true
@@jakemortwedt161 I had a hot piece of curly metal burn me
Was thinking, I would put the threaded plug in the other way so the washer could set against the wide part of the plug... I welded the same heat raiser on a 300 in a 79 F150 (wish I had the truck back…). I used a mig welder and heated it up with the fire wrench, looks like you braised it.. nice jobs
Also, where is the IH 86 in the corner??
My rusty brazing didn't turn out that great but it should be better than it was.
1086 is still there 😔
Thanks